Back to publication catalog

Published 2000-09-14 · Federal Register document 00-23582

Airworthiness Directives; Eurocopter Canada Ltd. Model BO 105 LS A-3 Helicopters

Publication summary

This amendment supersedes an existing airworthiness directive (AD) that applies to Eurocopter Canada Ltd. Model BO 105 LS A-3 helicopters. That AD currently requires, before further flight, creating a component log card or equivalent record and determining the calendar age and number of flights on each tension-torsion (TT) strap, and inspecting and removing, as necessary, certain unairworthy TT straps. This amendment establishes a life limit for certain main rotor TT straps. This amendment is prompted by an accident in which a main rotor blade (blade) separated from a Eurocopter Deutschland GMBH (ECD) Model MBB-BK 117 helicopter due to fatigue failure of a TT strap. The same part-numbered TT strap is used on the Model BO 105 LS A-3 helicopters. The actions specified by this AD are intended to prevent fatigue failure of a TT strap, loss of a blade, and subsequent loss of control of the helicopter.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:00.616356+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2000-18aee3630151116d
Source row
results[424]
Raw source SHA-256
18aee3630151116d2fb3a6893673332fd0937cde18bc691722f3a802a62279eb

Final-rule publication

Recorded publication clauses

AD identifier printed in this edition
2000-18-13
Effective date printed in this edition
2000-10-19

Some source clauses remain unstructured. Read the complete publication for conditions that have not been interpreted here.

Read 2 complete recorded clauses
Applicability wording · Applicability
    Applicability: Model BO 105 LS A-3 helicopters, with part number 
(P/N) 2604067 (Bendix) or J17322-1 (Lord) rotor tension torsion (TT) 
strap, installed, certificated in any category.

    Note 1: This AD applies to each helicopter identified in the 
preceding applicability provision, regardless of whether it has been 
otherwise modified, altered, or repaired in the area subject to the 
requirements of this AD. For helicopters that have been modified, 
altered, or repaired so that the performance of the requirements of 
this AD is affected, the owner/operator must request approval for an 
alternative method of compliance in accordance with paragraph (d) of 
this AD. The request should include an assessment of the effect of 
the modification, alteration, or repair on the unsafe condition 
addressed by this AD; and if the unsafe condition has not been 
eliminated, the request should include specific proposed actions to 
address it.

Exact source excerpt. Text positions 4975–5924, end exclusive, in the original decoded publication. SHA-256: 4f206ec709f0cd59a4697234ab8355d751fe983c72df958958cc86c14aa6e912

Compliance and requirements
    Compliance: Required as indicated, unless accomplished 
previously.
    To prevent fatigue failure of a TT strap, loss of a main rotor 
blade (blade), and subsequent loss of control of the helicopter, 
accomplish the following:
    (a) Before further flight,
    (1) Create a component log card or equivalent record for each TT 
strap.
    (2) Review the history of each helicopter and TT strap. 
Determine the age since initial installation on any helicopter (age) 
and the number of flights on each TT strap. Enter both the age and 
the number of flights for each TT strap on the component log card or 
equivalent record. When the number of flights is unknown, multiply 
the number of hours time-in-service (TIS) by 5 to determine the 
number of flights. If a TT strap has been previously used at any 
time on Model BO-105LS A-3 ``SUPER LIFTER'', BO-105 CB-5, BO-105 
CBS-5, BO-105 DBS-5, or any MBB-BK 117 series helicopter, multiply 
the total number of flights accumulated on those other models by a 
factor of 1.6 and then add that result to the number of flights 
accumulated on the helicopters affected by this AD.
    (3) Remove any TT strap from service if the total hours TIS or 
number of flights and age cannot be determined.
    (b) Remove any TT strap, P/N 2604067 or J17322-1, that has been 
in service 120 months since initial installation on any helicopter 
or accumulated 40,000 flights (a flight is a takeoff and a landing). 
Replace the TT strap with an airworthy TT strap.
    (c) This AD revises the Airworthiness Limitations Section of the 
maintenance manual by establishing a life limit for the TT strap, P/
N 2604067 and J17322-1, of 120 months or 40,000 flights, whichever 
occurs first.
    (d) An alternative method of compliance or adjustment of the 
compliance time that provides an acceptable level of safety may be 
used if approved by the Manager, Regulations Group, Rotorcraft 
Directorate, FAA. Operators shall submit their requests through an 
FAA Principal Maintenance Inspector, who may concur or comment and 
then send it to the Manager, Regulations Group.

    Note 2: Information concerning the existence of approved 
alternative methods of compliance with this AD, if any, may be 
obtained from the Regulations Group.

    (e) Special flight permits may be issued in accordance with 
Secs. 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 
21.197 and 21.199) to operate the helicopter to a location where the 
requirements of this AD can be accomplished.
    (f) This amendment becomes effective on October 19, 2000.

    Note 3: The subject of this AD is addressed in Transport Canada 
Civil Aviation, Canada, AD CF-99-24R1, dated September 22, 1999.

Exact source excerpt. Text positions 5924–8637, end exclusive, in the original decoded publication. SHA-256: 19827a0afbc59c6e0a2eff4ac8ff6b1c4a368d1661499c1b8d617c3ba1cdae24

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2000-18-13 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 8352798439557be2f0b9f1fcdf494e6505cbe24acae3ff11bb3fa3c41222e417. Source manifest: f60e49ba8554808f5d0e8d2f9743c770b7f39e8c738aea619ddb53c91e30edec.

Official source · 2000-09-14

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 65, Number 179 (Thursday, September 14, 2000)]
[Rules and Regulations]
[Pages 55452-55453]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 00-23582]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. 99-SW-68-AD; Amendment 39-11899; AD 2000-18-13]
RIN 2120-AA64


Airworthiness Directives; Eurocopter Canada Ltd. Model BO 105 LS 
A-3 Helicopters

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: This amendment supersedes an existing airworthiness directive 
(AD) that applies to Eurocopter Canada Ltd. Model BO 105 LS A-3 
helicopters. That AD currently requires, before further flight, 
creating a component log card or equivalent record and determining the 
calendar age and number of flights on each tension-torsion (TT) strap, 
and inspecting and removing, as necessary, certain unairworthy TT 
straps. This amendment establishes a life limit for certain main rotor 
TT straps. This amendment is prompted by an accident in which a main 
rotor blade (blade) separated from a Eurocopter Deutschland GMBH (ECD) 
Model MBB-BK 117 helicopter due to fatigue failure of a TT strap. The 
same part-numbered TT strap is used on the Model BO 105 LS A-3 
helicopters. The actions specified by this AD are intended to prevent 
fatigue failure of a TT strap, loss of a blade, and subsequent loss of 
control of the helicopter.

EFFECTIVE DATE: October 19, 2000.

FOR FURTHER INFORMATION CONTACT: Charles Harrison, Aviation Safety 
Engineer, FAA, Rotorcraft Directorate, Rotorcraft Standards Staff, Fort 
Worth, Texas 76193-0110, telephone (817) 222-5128, fax (817) 222-5961.

SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal 
Aviation Regulations (14 CFR part 39) by superseding AD 99-20-13, 
Amendment 39-11371 (64 FR 56156, October 18, 1999), which applies to 
Eurocopter Canada Ltd. Model BO 105 LS A-3 helicopters, was published 
in the Federal Register on June 19, 2000 (65 FR 37924). That action 
proposed to require establishing a life limit for the TT straps of 120 
months or 25,000 flights, whichever occurs first.
    Interested persons have been afforded an opportunity to participate 
in the making of this amendment. No comments were received on the 
proposal or the FAA's determination of the cost to the public. The FAA 
has determined that air safety and the public interest require the 
adoption of the rule as proposed.
    The FAA estimates that 20 helicopters of U.S. registry will be 
affected by this AD, that it will take approximately 16 work hours per 
helicopter to accomplish the required actions, and that the average 
labor rate is $60 per work hour. Required parts will cost approximately 
$10,400 per helicopter. Based on these figures, the total cost impact 
of the AD on U.S. operators is estimated to be $227,200.
    The regulations adopted herein will not have a substantial direct 
effect on the States, on the relationship between the national 
Government and the States, or on the distribution of power and 
responsibilities among the various levels of government. Therefore, it 
is determined that this final rule does not have federalism 
implications under Executive Order 13132.
    For the reasons discussed above, I certify that this action (1) is 
not a ``significant regulatory action'' under Executive Order 12866; 
(2) is not a ``significant rule'' under DOT Regulatory Policies and 
Procedures (44 FR 11034, February 26, 1979); and (3) will not have a 
significant economic impact, positive or negative, on a substantial 
number of small entities under the criteria of the Regulatory 
Flexibility Act. A final evaluation has been prepared for this action 
and it is contained in the Rules Docket. A copy of it may be obtained 
from the Rules Docket at the FAA, Office of the Regional Counsel, 
Southwest Region, 2601 Meacham Blvd., Room 663, Fort Worth, Texas.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Safety.

[[Page 55453]]

Adoption of the Amendment

    Accordingly, pursuant to the authority delegated to me by the 
Administrator, the Federal Aviation Administration amends part 39 of 
the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

    1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec. 39.13  [Amended]

    2. Section 39.13 is amended by removing Amendment 39-11371 (64 FR 
56156, October 18, 1999), and by adding a new airworthiness directive 
(AD), Amendment 39-11899, to read as follows:

2000-18-13  Eurocopter Canada Ltd.: Amendment 39-11899. Docket No. 
99-SW-68-AD. Supersedes AD 99-20-13, Amendment 39-11371, Docket No. 
99-SW-56-AD.

    Applicability: Model BO 105 LS A-3 helicopters, with part number 
(P/N) 2604067 (Bendix) or J17322-1 (Lord) rotor tension torsion (TT) 
strap, installed, certificated in any category.

    Note 1: This AD applies to each helicopter identified in the 
preceding applicability provision, regardless of whether it has been 
otherwise modified, altered, or repaired in the area subject to the 
requirements of this AD. For helicopters that have been modified, 
altered, or repaired so that the performance of the requirements of 
this AD is affected, the owner/operator must request approval for an 
alternative method of compliance in accordance with paragraph (d) of 
this AD. The request should include an assessment of the effect of 
the modification, alteration, or repair on the unsafe condition 
addressed by this AD; and if the unsafe condition has not been 
eliminated, the request should include specific proposed actions to 
address it.

    Compliance: Required as indicated, unless accomplished 
previously.
    To prevent fatigue failure of a TT strap, loss of a main rotor 
blade (blade), and subsequent loss of control of the helicopter, 
accomplish the following:
    (a) Before further flight,
    (1) Create a component log card or equivalent record for each TT 
strap.
    (2) Review the history of each helicopter and TT strap. 
Determine the age since initial installation on any helicopter (age) 
and the number of flights on each TT strap. Enter both the age and 
the number of flights for each TT strap on the component log card or 
equivalent record. When the number of flights is unknown, multiply 
the number of hours time-in-service (TIS) by 5 to determine the 
number of flights. If a TT strap has been previously used at any 
time on Model BO-105LS A-3 ``SUPER LIFTER'', BO-105 CB-5, BO-105 
CBS-5, BO-105 DBS-5, or any MBB-BK 117 series helicopter, multiply 
the total number of flights accumulated on those other models by a 
factor of 1.6 and then add that result to the number of flights 
accumulated on the helicopters affected by this AD.
    (3) Remove any TT strap from service if the total hours TIS or 
number of flights and age cannot be determined.
    (b) Remove any TT strap, P/N 2604067 or J17322-1, that has been 
in service 120 months since initial installation on any helicopter 
or accumulated 40,000 flights (a flight is a takeoff and a landing). 
Replace the TT strap with an airworthy TT strap.
    (c) This AD revises the Airworthiness Limitations Section of the 
maintenance manual by establishing a life limit for the TT strap, P/
N 2604067 and J17322-1, of 120 months or 40,000 flights, whichever 
occurs first.
    (d) An alternative method of compliance or adjustment of the 
compliance time that provides an acceptable level of safety may be 
used if approved by the Manager, Regulations Group, Rotorcraft 
Directorate, FAA. Operators shall submit their requests through an 
FAA Principal Maintenance Inspector, who may concur or comment and 
then send it to the Manager, Regulations Group.

    Note 2: Information concerning the existence of approved 
alternative methods of compliance with this AD, if any, may be 
obtained from the Regulations Group.

    (e) Special flight permits may be issued in accordance with 
Secs. 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 
21.197 and 21.199) to operate the helicopter to a location where the 
requirements of this AD can be accomplished.
    (f) This amendment becomes effective on October 19, 2000.

    Note 3: The subject of this AD is addressed in Transport Canada 
Civil Aviation, Canada, AD CF-99-24R1, dated September 22, 1999.


    Issued in Fort Worth, Texas, on September 5, 2000.
Henry A. Armstrong,
Manager, Rotorcraft Directorate, Aircraft Certification Service.
[FR Doc. 00-23582 Filed 9-13-00; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:36:34.055308+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
f5a1ecb5fb4b5ba01579200e0a802b61e928cb8fe950ef5062f7acb5764c64c9
Text SHA-256
8352798439557be2f0b9f1fcdf494e6505cbe24acae3ff11bb3fa3c41222e417

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.