Back to publication catalog

Published 2001-08-22 · Federal Register document 01-20935

Airworthiness Directives; McDonnell Douglas Model MD-11 Series Airplanes

Publication summary

This amendment adopts a new airworthiness directive (AD), applicable to certain McDonnell Douglas Model MD-11 series airplanes, that requires performing a general visual inspection to detect chafing or damage of the parallel power feeder cables of the number 2 integrated drive generator (IDG); repairing any chafed cable and damaged structure; and repositioning the parallel power feeder cables of the number 2 IDG. This action is necessary to prevent chafing and arcing of the parallel feeder cables of the number 2 IDG, which could result in smoke and/or fire in the right aft galley area. This action is intended to address the identified unsafe condition.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:03.835669+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2001-8d66ddb74aa17366
Source row
results[354]
Raw source SHA-256
8d66ddb74aa17366596c5f6ccb4e6d04532df19ae027b6fa003379bdedb52c7e

Final-rule publication

Recorded publication clauses

AD identifier printed in this edition
2001-17-08
Effective date printed in this edition
2001-09-26

Some source clauses remain unstructured. Read the complete publication for conditions that have not been interpreted here.

Read 2 complete recorded clauses
Applicability wording · Applicability
    Applicability: Model MD-11 series airplanes, as listed in 
McDonnell Douglas Alert Service Bulletin MD11-24A157, dated August 
10, 2000; certificated in any category.

    Note 1: This AD applies to each airplane identified in the 
preceding applicability provision, regardless of whether it has been 
modified, altered, or repaired in the area subject to the 
requirements of this AD. For airplanes that have been modified, 
altered, or repaired so that the performance of the requirements of 
this AD is affected, the owner/operator must request approval for an 
alternative method of compliance in accordance with paragraph (b) of 
this AD. The request should include an assessment of the effect of 
the modification, alteration, or repair on the unsafe condition 
addressed by this AD; and, if the unsafe condition has not been 
eliminated, the request should include specific proposed actions to 
address it.

Exact source excerpt. Text positions 7014–7933, end exclusive, in the original decoded publication. SHA-256: 64d8dc6a7fb228b6e284f0a10d07e4f55ba3fb66b0b98b14afb69958b9a618b9

Compliance and requirements
    Compliance: Required as indicated, unless accomplished 
previously.
    To prevent chafing and arcing of the parallel feeder cables of 
the number 2 integrated drive generator (IDG), which could result in 
smoke and/or fire in the right aft galley area, accomplish the 
following:

Inspection

    (a) Within 6 months after the effective date of this AD, do a 
general visual inspection to detect chafing or damage of the 
parallel power feeder cables of the number 2 IDG, per McDonnell 
Douglas Alert Service Bulletin MD11-24A157, dated August 10, 2000.

    Note 2: For the purposes of this AD, a general visual inspection 
is defined as ``A visual examination of an interior or exterior 
area, installation, or assembly to detect obvious damage, failure, 
or irregularity. This level of inspection is made under normally 
available lighting conditions such as daylight, hangar lighting, 
flashlight, or drop-light, and may require removal or opening of 
access panels or doors. Stands, ladders, or platforms may be 
required to gain proximity to the area being checked.''

Condition 1 (No Chafing and No Structure Damage)

    (1) If no chafing and damage is detected, before further flight, 
reposition the parallel power feeder cables of the number 2 IDG, per 
the service bulletin.

Condition 2 (Chafing or Structure Damage)

    (2) If any chafing or damage is detected, before further flight, 
repair the chafed cable and damaged structure, as applicable, and 
reposition the parallel power feeder cables of the number 2 IDG, per 
the service bulletin.

Alternative Methods of Compliance

    (b) An alternative method of compliance or adjustment of the 
compliance time that provides an acceptable level of safety may be 
used if approved by the Manager, Los Angeles Aircraft Certification 
Office (ACO), FAA. Operators shall submit their requests through an 
appropriate FAA Principal Maintenance Inspector, who may add 
comments and then send it to the Manager, Los Angeles ACO.

    Note 3: Information concerning the existence of approved 
alternative methods of compliance with this AD, if any, may be 
obtained from the Los Angeles ACO.

Special Flight Permits

    (c) Special flight permits may be issued in accordance with 
sections 21.197 and 21.199 of the Federal Aviation Regulations (14 
CFR 21.197 and 21.199) to operate the airplane to a location where 
the requirements of this AD can be accomplished.

Incorporation by Reference

    (d) The actions shall be done in accordance with McDonnell 
Douglas Alert Service Bulletin MD11-24A157, dated August 10, 2000. 
This incorporation by reference was approved by the Director of the 
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 
51. Copies may be obtained from Boeing Commercial Aircraft Group, 
Long Beach Division, 3855 Lakewood Boulevard, Long Beach, California 
90846, Attention: Data and Service Management, Dept. C1-L5A (D800-
0024). Copies may be inspected at the FAA, Transport Airplane 
Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the 
FAA, Los Angeles Aircraft Certification Office, 3960 Paramount 
Boulevard, Lakewood, California; or at the Office of the Federal 
Register, 800 North Capitol Street, NW., suite 700, Washington, DC.

Effective Date

    (e) This amendment becomes effective on September 26, 2001.

Exact source excerpt. Text positions 7933–11275, end exclusive, in the original decoded publication. SHA-256: c91bbe4eb9c4d8bb5dcc1ac2c662a747ec2517c0dfbd0a5b1fff42ac2c07bfae

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2001-17-08 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 25596b0838a51c1006215c0fc8e87abcaeddd624c876e0ace8dc876b845df539. Source manifest: ea92cfc79f94696a2af7dcaa8b27e8a1c16f8528b7eaa5efbab922bc5b4d87ff.

Official source · 2001-08-22

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 66, Number 163 (Wednesday, August 22, 2001)]
[Rules and Regulations]
[Pages 44043-44044]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 01-20935]



[[Page 44043]]

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. 2000-NM-188-AD; Amendment 39-12399; AD 2001-17-08]
RIN 2120-AA64


Airworthiness Directives; McDonnell Douglas Model MD-11 Series 
Airplanes

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: This amendment adopts a new airworthiness directive (AD), 
applicable to certain McDonnell Douglas Model MD-11 series airplanes, 
that requires performing a general visual inspection to detect chafing 
or damage of the parallel power feeder cables of the number 2 
integrated drive generator (IDG); repairing any chafed cable and 
damaged structure; and repositioning the parallel power feeder cables 
of the number 2 IDG. This action is necessary to prevent chafing and 
arcing of the parallel feeder cables of the number 2 IDG, which could 
result in smoke and/or fire in the right aft galley area. This action 
is intended to address the identified unsafe condition.

DATES: Effective September 26, 2001.
    The incorporation by reference of certain publications listed in 
the regulations is approved by the Director of the Federal Register as 
of September 26, 2001.

ADDRESSES: The service information referenced in this AD may be 
obtained from Boeing Commercial Aircraft Group, Long Beach Division, 
3855 Lakewood Boulevard, Long Beach, California 90846, Attention: Data 
and Service Management, Dept. C1-L5A (D800-0024). This information may 
be examined at the Federal Aviation Administration (FAA), Transport 
Airplane Directorate, Rules Docket, 1601 Lind Avenue, SW., Renton, 
Washington; or at the FAA, Los Angeles Aircraft Certification Office, 
3960 Paramount Boulevard, Lakewood, California; or at the Office of the 
Federal Register, 800 North Capitol Street, NW., suite 700, Washington, 
DC.

FOR FURTHER INFORMATION CONTACT: Brett Portwood, Aerospace Engineer, 
Systems and Equipment Branch, ANM-130L, FAA, Los Angeles Aircraft 
Certification Office, 3960 Paramount Boulevard, Lakewood, California 
90712-4137; telephone (562) 627-5350; fax (562) 627-5210.

SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal 
Aviation Regulations (14 CFR part 39) to include an airworthiness 
directive (AD) that is applicable to certain McDonnell Douglas Model 
MD-11 series airplanes was published in the Federal Register on 
February 20, 2001 (66 FR 10853). That action proposed to require 
performing a general visual inspection to detect chafing or damage of 
the parallel power feeder cables of the number 2 integrated drive 
generator (IDG); repairing any chafed cable and damaged structure; and 
repositioning the parallel power feeder cables of the number 2 IDG.

Comments

    Interested persons have been afforded an opportunity to participate 
in the making of this amendment. Due consideration has been given to 
the comment received.

Address Change for Obtaining Service Information

    The airplane manufacturer states that the referenced department 
name, number, and mail code of the address for obtaining service 
information are incorrect in the proposed AD. The correct address is 
Boeing Commercial Aircraft Group, Long Beach Division, 3855 Lakewood 
Boulevard, Long Beach, California 90846, Attention: Data and Service 
Management, Dept. C1-L5A (D800-0024). The airplane manufacturer 
requests that the proposed AD be revised accordingly. The FAA agrees 
and has revised this address in the final rule.

Conclusion

    After careful review of the available data, including the comment 
noted above, the FAA has determined that air safety and the public 
interest require the adoption of the rule with the change previously 
described. The FAA has determined that this change will neither 
increase the economic burden on any operator nor increase the scope of 
the AD.

Cost Impact

    There are approximately 64 Model MD-11 series airplanes of the 
affected design in the worldwide fleet. The FAA estimates that 14 
airplanes of U.S. registry will be affected by this AD, that it will 
take approximately 4 work hours per airplane to accomplish the required 
actions, and that the average labor rate is $60 per work hour. Based on 
these figures, the cost impact of the AD on U.S. operators is estimated 
to be $3,360, or $240 per airplane.
    The cost impact figure discussed above is based on assumptions that 
no operator has yet accomplished any of the requirements of this AD 
action, and that no operator would accomplish those actions in the 
future if this AD were not adopted. The cost impact figures discussed 
in AD rulemaking actions represent only the time necessary to perform 
the specific actions actually required by the AD. These figures 
typically do not include incidental costs, such as the time required to 
gain access and close up, planning time, or time necessitated by other 
administrative actions.

Regulatory Impact

    The regulations adopted herein will not have a substantial direct 
effect on the States, on the relationship between the national 
Government and the States, or on the distribution of power and 
responsibilities among the various levels of government. Therefore, it 
is determined that this final rule does not have federalism 
implications under Executive Order 13132.
    For the reasons discussed above, I certify that this action (1) is 
not a ``significant regulatory action'' under Executive Order 12866; 
(2) is not a ``significant rule'' under DOT Regulatory Policies and 
Procedures (44 FR 11034, February 26, 1979); and (3) will not have a 
significant economic impact, positive or negative, on a substantial 
number of small entities under the criteria of the Regulatory 
Flexibility Act. A final evaluation has been prepared for this action 
and it is contained in the Rules Docket. A copy of it may be obtained 
from the Rules Docket at the location provided under the caption 
``ADDRESSES.''

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, pursuant to the authority delegated to me by the 
Administrator, the Federal Aviation Administration amends part 39 of 
the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

    1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.

[[Page 44044]]

Sec. 39.13  [Amended]

    2. Section 39.13 is amended by adding the following new 
airworthiness directive:

2001-17-08  McDonnell Douglas: Amendment 39-12399. Docket 2000-NM-
188-AD.

    Applicability: Model MD-11 series airplanes, as listed in 
McDonnell Douglas Alert Service Bulletin MD11-24A157, dated August 
10, 2000; certificated in any category.

    Note 1: This AD applies to each airplane identified in the 
preceding applicability provision, regardless of whether it has been 
modified, altered, or repaired in the area subject to the 
requirements of this AD. For airplanes that have been modified, 
altered, or repaired so that the performance of the requirements of 
this AD is affected, the owner/operator must request approval for an 
alternative method of compliance in accordance with paragraph (b) of 
this AD. The request should include an assessment of the effect of 
the modification, alteration, or repair on the unsafe condition 
addressed by this AD; and, if the unsafe condition has not been 
eliminated, the request should include specific proposed actions to 
address it.

    Compliance: Required as indicated, unless accomplished 
previously.
    To prevent chafing and arcing of the parallel feeder cables of 
the number 2 integrated drive generator (IDG), which could result in 
smoke and/or fire in the right aft galley area, accomplish the 
following:

Inspection

    (a) Within 6 months after the effective date of this AD, do a 
general visual inspection to detect chafing or damage of the 
parallel power feeder cables of the number 2 IDG, per McDonnell 
Douglas Alert Service Bulletin MD11-24A157, dated August 10, 2000.

    Note 2: For the purposes of this AD, a general visual inspection 
is defined as ``A visual examination of an interior or exterior 
area, installation, or assembly to detect obvious damage, failure, 
or irregularity. This level of inspection is made under normally 
available lighting conditions such as daylight, hangar lighting, 
flashlight, or drop-light, and may require removal or opening of 
access panels or doors. Stands, ladders, or platforms may be 
required to gain proximity to the area being checked.''

Condition 1 (No Chafing and No Structure Damage)

    (1) If no chafing and damage is detected, before further flight, 
reposition the parallel power feeder cables of the number 2 IDG, per 
the service bulletin.

Condition 2 (Chafing or Structure Damage)

    (2) If any chafing or damage is detected, before further flight, 
repair the chafed cable and damaged structure, as applicable, and 
reposition the parallel power feeder cables of the number 2 IDG, per 
the service bulletin.

Alternative Methods of Compliance

    (b) An alternative method of compliance or adjustment of the 
compliance time that provides an acceptable level of safety may be 
used if approved by the Manager, Los Angeles Aircraft Certification 
Office (ACO), FAA. Operators shall submit their requests through an 
appropriate FAA Principal Maintenance Inspector, who may add 
comments and then send it to the Manager, Los Angeles ACO.

    Note 3: Information concerning the existence of approved 
alternative methods of compliance with this AD, if any, may be 
obtained from the Los Angeles ACO.

Special Flight Permits

    (c) Special flight permits may be issued in accordance with 
sections 21.197 and 21.199 of the Federal Aviation Regulations (14 
CFR 21.197 and 21.199) to operate the airplane to a location where 
the requirements of this AD can be accomplished.

Incorporation by Reference

    (d) The actions shall be done in accordance with McDonnell 
Douglas Alert Service Bulletin MD11-24A157, dated August 10, 2000. 
This incorporation by reference was approved by the Director of the 
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 
51. Copies may be obtained from Boeing Commercial Aircraft Group, 
Long Beach Division, 3855 Lakewood Boulevard, Long Beach, California 
90846, Attention: Data and Service Management, Dept. C1-L5A (D800-
0024). Copies may be inspected at the FAA, Transport Airplane 
Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the 
FAA, Los Angeles Aircraft Certification Office, 3960 Paramount 
Boulevard, Lakewood, California; or at the Office of the Federal 
Register, 800 North Capitol Street, NW., suite 700, Washington, DC.

Effective Date

    (e) This amendment becomes effective on September 26, 2001.

    Issued in Renton, Washington, on August 14, 2001.
Vi L. Lipski,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 01-20935 Filed 8-21-01; 8:45 am]
BILLING CODE 4910-13-U


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:26:53.218943+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
a50c0adee7f6dfeb4d5aaf1aa4e35dda297e02e7b8bdfc3c52a21fb649687d30
Text SHA-256
25596b0838a51c1006215c0fc8e87abcaeddd624c876e0ace8dc876b845df539

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.