Published 2001-10-26 · Federal Register document 01-26967
Airworthiness Directives; Honeywell International, Inc. LTP 101 Series Turboprop and LTS101 Series Turboshaft Engines
Publication summary
This amendment adopts a new airworthiness directive (AD), that is applicable to certain Honeywell International, Inc. (formerly AlliedSignal, Inc. and Textron Lycoming) LTP 101 series turboprop and LTS101 series turboshaft engines. This amendment requires a new life limitation and removal of rigid tube fuel manifold assemblies and replacement with serviceable assemblies. This amendment is prompted by reports of cracking and fuel leakage of rigid tube fuel manifolds. The actions specified by this AD are intended to prevent engine fuel leakage due to low-cycle fatigue (LCF) cracking of the rigid tube fuel manifold, which could result in an in-flight fire.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:03.835669+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2001-8d66ddb74aa17366
- Source row
- results[440]
- Raw source SHA-256
- 8d66ddb74aa17366596c5f6ccb4e6d04532df19ae027b6fa003379bdedb52c7e
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 2001-22-07
- Effective date printed in this edition
- 2001-11-30
Some source clauses remain unstructured. Read the complete publication for conditions that have not been interpreted here.
Read 2 complete recorded clauses
Applicability wording · Applicability
Applicability: This airworthiness directive (AD) is applicable
to Honeywell International, Inc. (formerly AlliedSignal Inc. and
Textron Lycoming) LTP 101 series turboprop and LTS101 series
turboshaft engines with the following part numbers (P/N's) rigid
tube fuel manifolds installed:
[[Page 54120]]
Table 1.--P/N's of Affected Rigid Tube Fuel Manifolds
----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------
4-301-042-02 4-301-042-06 4-301-236-03 4-301-286-02
4-301-042-04 4-301-236-01 4-301-236-04 4-301-376-01
4-301-042-05 4-301-236-02 4-301-286-01
----------------------------------------------------------------------------------------------------------------
These engines are installed on, but not limited to Aerospatiale
AS350, Eurocopter MBB-BK117 and HH-65A, Bell 222, Page Thrush, Air
Tractor AT-302, Piaggio P.166-DL3, Riley International R421, and
Pacific Aero 08-600 aircraft.
Note 1: This AD applies to each engine identified in the
preceding applicability provision, regardless of whether it has been
modified, altered, or repaired in the area subject to the
requirements of this AD. For engines that have been modified,
altered, or repaired so that the performance of the requirements of
this AD is affected, the owner/operator must request approval for an
alternative method of compliance in accordance with paragraph (c) of
this AD. The request should include an assessment of the effect of
the modification, alteration, or repair on the unsafe condition
addressed by this AD; and, if the unsafe condition has not been
eliminated, the request should include specific proposed actions to
address it.
Exact source excerpt. Text positions 5200–7232, end exclusive, in the original decoded publication. SHA-256: 32ab5e6456d7ea641c13293eceacd52c55052fa50564721fd4a48fe6734c8e75
Compliance and requirements
Compliance: Compliance with this AD is required as specified
below, unless already done.
To prevent engine fuel leakage due to low-cycle fatigue (LCF)
cracking of the rigid tube fuel manifold, which could result in an
in-flight fire, do the following:
(a) Replace fuel manifolds that have accumulated the following
gas generator rotor (Ng) cycles-since-new (CSN) on the effective
date of this AD or Ng cycles-in-service (CIS) on the effective date
of this AD since all tubes were replaced:
Table 2.--Fuel Tube Replacement Schedule
------------------------------------------------------------------------
Ng CSN, or Ng CIS since total tube
replacement Replacement schedule
------------------------------------------------------------------------
(1) 2,750 or less...................... Before accumulating 3,000 total
Ng cycles.
(2) More than 2,750.................... Within 250 CIS after the
effective date of this AD.
(3) Unknown............................ (i) Within 2,000 CIS after the
effective date of this AD; or
(ii) At the next engine
removal; or
(iii) At the removal of the
fuel manifold for cause,
whichever is first.
------------------------------------------------------------------------
New Life Limitation
(b) Do not install fuel manifolds with P/N's that are listed in
Table 1 of this AD after the effective date of this AD if they meet
ANY of the following conditions:
(1) The manifold has accumulated 3,000 or more total Ng cycles;
or
(2) The manifold has had partial tube replacements; or
(3) The manifold has an unknown number of Ng cycles.
Alternative Methods of Compliance
(c) An alternative method of compliance or adjustment of the
compliance time that provides an acceptable level of safety may be
used if approved by the Manager, Los Angeles Aircraft Certification
Office (LAACO). Operators must submit their request through an
appropriate FAA Principal Maintenance Inspector, who may add
comments and then send it to the Manager, LAACO.
Note 2: Information concerning the existence of approved
alternative methods of compliance with this airworthiness directive,
if any, may be obtained from the LAACO.
Special Flight Permits
(d) Special flight permits may be issued in accordance
Secs. 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR
21.197 and 21.199) to operate the aircraft to a location where the
requirements of this AD can be accomplished.
Effective Date
(e) This amendment becomes effective on November 30, 2001.
Exact source excerpt. Text positions 7232–10160, end exclusive, in the original decoded publication. SHA-256: f495e1fc43502157f3d043fc44b047816ccc666158204f7d2a38f69e62729beb
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2001-22-07 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: c47331b6f619dfaed1eb570706a47fa4ece2ef2233946463eb0256cb09ad1601. Source manifest: f7e382f89ed208c1eb61ac248a699b33e3aa7ca21b5ee06d698683e3d53f85b4.
Official source · 2001-10-26
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 66, Number 208 (Friday, October 26, 2001)]
[Rules and Regulations]
[Pages 54119-54120]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 01-26967]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 99-NE-16-AD; Amendment 39-12486; AD 2001-22-07]
RIN 2120-AA64
Airworthiness Directives; Honeywell International, Inc. LTP 101
Series Turboprop and LTS101 Series Turboshaft Engines
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: This amendment adopts a new airworthiness directive (AD), that
is applicable to certain Honeywell International, Inc. (formerly
AlliedSignal, Inc. and Textron Lycoming) LTP 101 series turboprop and
LTS101 series turboshaft engines. This amendment requires a new life
limitation and removal of rigid tube fuel manifold assemblies and
replacement with serviceable assemblies. This amendment is prompted by
reports of cracking and fuel leakage of rigid tube fuel manifolds. The
actions specified by this AD are intended to prevent engine fuel
leakage due to low-cycle fatigue (LCF) cracking of the rigid tube fuel
manifold, which could result in an in-flight fire.
DATES: Effective date November 30, 2001.
ADDRESSES: The information in this AD may be examined, by appointment,
at the Federal Aviation Administration (FAA), New England Region,
Office of the Regional Counsel, 12 New England Executive Park,
Burlington, MA; or at the Office of the Federal Register, 800 North
Capitol Street, NW., suite 700, Washington, DC.
FOR FURTHER INFORMATION CONTACT: Robert Baitoo, Aerospace Engineer, Los
Angeles Aircraft Certification Office, FAA, Transport Airplane
Directorate, 3960 Paramount Blvd., Lakewood, CA 90712-4137; telephone
(562) 627-5245; fax (562) 627-5210.
SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal
Aviation Regulations (14 CFR part 39) to include an AD that is
applicable to certain Honeywell International, Inc. (formerly
AlliedSignal, Inc. and Textron Lycoming) LTP 101 series turboprop and
LTS101 series turboshaft engines was published in the Federal Register
on March 12, 2001 (66 FR 14346). That action proposed to require a new
life limitation and removal of rigid tube fuel manifold assemblies and
replacement with serviceable assemblies.
Comments
Interested persons have been afforded an opportunity to participate
in the making of this amendment. No comments were received on the
proposal or the FAA's determination of the cost to the public. The FAA
has determined that air safety and the public interest require the
adoption of the rule as proposed.
Economic Analysis
There are approximately 1,600 engines of the affected design in the
worldwide fleet. The FAA estimates that 670 engines installed on
aircraft of U.S. registry would be affected by this proposed AD, that
it would take approximately 2 work hours per engine to accomplish the
required actions, and that the average labor rate is $60 per work hour.
Required parts would cost approximately $6,000 per engine. Based on
these figures, the total cost impact of the proposed AD on U.S.
operators is estimated to be $4,100,400.
Regulatory Analysis
This final rule does not have federalism implications, as defined
in Executive Order 13132, because it would not have a substantial
direct effect on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government. Accordingly,
the FAA has not consulted with state authorities prior to publication
of this final rule.
For the reasons discussed above, I certify that this action (1) is
not a ``significant regulatory action'' under Executive Order 12866;
(2) is not a ``significant rule'' under the DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979); and (3) if promulgated,
will not have a significant economic impact, positive or negative, on a
substantial number of small entities under the criteria of the
Regulatory Flexibility Act. A final evaluation has been prepared for
this action and it is contained in the Rules Docket. A copy of it may
be obtained by contacting the Rules Docket at the location provided
under the caption ADDRESSES.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Safety.
Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the
Administrator, the Federal Aviation Administration amends part 39 of
the Federal Aviation Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. Section 39.13 is amended by adding a new airworthiness directive
to read as follows:
2001-22-07 Honeywell International, Inc.: Amendment 39-12486.
Docket 99-NE-16-AD.
Applicability: This airworthiness directive (AD) is applicable
to Honeywell International, Inc. (formerly AlliedSignal Inc. and
Textron Lycoming) LTP 101 series turboprop and LTS101 series
turboshaft engines with the following part numbers (P/N's) rigid
tube fuel manifolds installed:
[[Page 54120]]
Table 1.--P/N's of Affected Rigid Tube Fuel Manifolds
----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------
4-301-042-02 4-301-042-06 4-301-236-03 4-301-286-02
4-301-042-04 4-301-236-01 4-301-236-04 4-301-376-01
4-301-042-05 4-301-236-02 4-301-286-01
----------------------------------------------------------------------------------------------------------------
These engines are installed on, but not limited to Aerospatiale
AS350, Eurocopter MBB-BK117 and HH-65A, Bell 222, Page Thrush, Air
Tractor AT-302, Piaggio P.166-DL3, Riley International R421, and
Pacific Aero 08-600 aircraft.
Note 1: This AD applies to each engine identified in the
preceding applicability provision, regardless of whether it has been
modified, altered, or repaired in the area subject to the
requirements of this AD. For engines that have been modified,
altered, or repaired so that the performance of the requirements of
this AD is affected, the owner/operator must request approval for an
alternative method of compliance in accordance with paragraph (c) of
this AD. The request should include an assessment of the effect of
the modification, alteration, or repair on the unsafe condition
addressed by this AD; and, if the unsafe condition has not been
eliminated, the request should include specific proposed actions to
address it.
Compliance: Compliance with this AD is required as specified
below, unless already done.
To prevent engine fuel leakage due to low-cycle fatigue (LCF)
cracking of the rigid tube fuel manifold, which could result in an
in-flight fire, do the following:
(a) Replace fuel manifolds that have accumulated the following
gas generator rotor (Ng) cycles-since-new (CSN) on the effective
date of this AD or Ng cycles-in-service (CIS) on the effective date
of this AD since all tubes were replaced:
Table 2.--Fuel Tube Replacement Schedule
------------------------------------------------------------------------
Ng CSN, or Ng CIS since total tube
replacement Replacement schedule
------------------------------------------------------------------------
(1) 2,750 or less...................... Before accumulating 3,000 total
Ng cycles.
(2) More than 2,750.................... Within 250 CIS after the
effective date of this AD.
(3) Unknown............................ (i) Within 2,000 CIS after the
effective date of this AD; or
(ii) At the next engine
removal; or
(iii) At the removal of the
fuel manifold for cause,
whichever is first.
------------------------------------------------------------------------
New Life Limitation
(b) Do not install fuel manifolds with P/N's that are listed in
Table 1 of this AD after the effective date of this AD if they meet
ANY of the following conditions:
(1) The manifold has accumulated 3,000 or more total Ng cycles;
or
(2) The manifold has had partial tube replacements; or
(3) The manifold has an unknown number of Ng cycles.
Alternative Methods of Compliance
(c) An alternative method of compliance or adjustment of the
compliance time that provides an acceptable level of safety may be
used if approved by the Manager, Los Angeles Aircraft Certification
Office (LAACO). Operators must submit their request through an
appropriate FAA Principal Maintenance Inspector, who may add
comments and then send it to the Manager, LAACO.
Note 2: Information concerning the existence of approved
alternative methods of compliance with this airworthiness directive,
if any, may be obtained from the LAACO.
Special Flight Permits
(d) Special flight permits may be issued in accordance
Secs. 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR
21.197 and 21.199) to operate the aircraft to a location where the
requirements of this AD can be accomplished.
Effective Date
(e) This amendment becomes effective on November 30, 2001.
Issued in Burlington, Massachusetts, on October 19, 2001.
Jay J. Pardee,
Manager, Engine and Propeller Directorate, Aircraft Certification
Service.
[FR Doc. 01-26967 Filed 10-25-01; 8:45 am]
BILLING CODE 4910-13-U
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:25:26.470361+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- 6374506163e3db14abc2360402e0c4811480ab334b7bcec7406a91748108466c
- Text SHA-256
- c47331b6f619dfaed1eb570706a47fa4ece2ef2233946463eb0256cb09ad1601
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.