Published 2001-01-03 · Federal Register document 01-30
Airworthiness Directives; British Aerospace (Jetstream) Model 4101 Airplanes
Publication summary
This amendment adopts a new airworthiness directive (AD), applicable to all British Aerospace (Jetstream) Model 4101 airplanes, that requires revising the Airworthiness Limitations Section of the Instructions for Continued Airworthiness to incorporate life limits for certain items and inspections to detect fatigue cracking in certain structures. This amendment is prompted by issuance of a revision to the airworthiness limitations of the British Aerospace J41 Aircraft Maintenance Manual. The actions specified by this AD are intended to ensure that fatigue cracking of certain structural elements is detected and corrected; such fatigue cracking could adversely affect the structural integrity of these airplanes.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:03.835669+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2001-8d66ddb74aa17366
- Source row
- results[5]
- Raw source SHA-256
- 8d66ddb74aa17366596c5f6ccb4e6d04532df19ae027b6fa003379bdedb52c7e
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 2000-26-08
- Effective date printed in this edition
- 2001-02-07
Some source clauses remain unstructured. Read the complete publication for conditions that have not been interpreted here.
Read 2 complete recorded clauses
Applicability wording · Applicability
Applicability: All Model Jetstream 4101 airplanes, certificated
in any category.
Note 1: This AD applies to each airplane identified in the
preceding applicability provision, regardless of whether it has been
modified, altered, or repaired in the area subject to the
requirements of this AD. For airplanes that have been modified,
altered, or repaired so that the performance of the requirements of
this AD is affected, the owner/operator must request approval for an
alternative method of compliance in accordance with paragraph (c) of
this AD. The request should include an assessment of the effect of
the modification, alteration, or repair on the unsafe condition
addressed by this AD; and, if the unsafe condition has not been
eliminated, the request should include specific proposed actions to
address it.
Exact source excerpt. Text positions 5683–6517, end exclusive, in the original decoded publication. SHA-256: e0408acca32edea047613993934ddfc3dad4ab897ae3dadc89a0afe81d829d22
Compliance and requirements
Compliance: Required as indicated, unless accomplished
previously.
To ensure continued structural integrity of these airplanes,
accomplish the following:
Airworthiness Limitations Revision
(a) Within 30 days after the effective date of this AD, revise
the Airworthiness Limitations Section (ALS) of the Instructions for
Continued Airworthiness by incorporating Section 05-10-10,
``Airworthiness Limitations Description and Operation,'' dated July
15, 1999, of the British Aerospace J41 Aircraft Maintenance Manual
(AMM) into the ALS.
(b) Except as provided by paragraph (c) of this AD: After the
actions specified in paragraph (a) of this AD have been
accomplished, no alternative inspections or inspection intervals may
be approved for the structural elements specified in the document
listed in paragraph (a) of this AD.
Alternative Methods of Compliance
(c) An alternative method of compliance or adjustment of the
compliance time that provides an acceptable level of safety may be
used if approved by the Manager, International Branch, ANM-116, FAA,
Transport Airplane Directorate. Operators shall submit their
requests through an appropriate FAA Principal Maintenance Inspector,
who may add comments and then send it to the Manager, International
Branch, ANM-116.
Note 2: Information concerning the existence of approved
alternative methods of compliance with this AD, if any, may be
obtained from the International Branch, ANM-116.
Special Flight Permits
(d) Special flight permits may be issued in accordance with
Secs. 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR
21.197 and 21.199) to operate the airplane to a location where the
requirements of this AD can be accomplished.
Effective Date
(e) This amendment becomes effective on February 7, 2001.
Exact source excerpt. Text positions 6517–8354, end exclusive, in the original decoded publication. SHA-256: d7e1e80b32bdf1f0ccd5728f7258c20b8a185c1d36ede8c2d6a9e29c3cd8fb14
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2000-26-08 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: fd6682c487fd67de62ac2e90977b529ce75130ad06b9d300567992353d11a57e. Source manifest: 1ab560824a5c1b9ae3e15c090b11cc58dc03a4ad72b2ca3c878c124e649cba75.
Official source · 2001-01-03
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 66, Number 2 (Wednesday, January 3, 2001)]
[Rules and Regulations]
[Pages 264-265]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 01-30]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 99-NM-250-AD; Amendment 39-12058; AD 2000-26-08]
RIN 2120-AA64
Airworthiness Directives; British Aerospace (Jetstream) Model
4101 Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: This amendment adopts a new airworthiness directive (AD),
applicable to all British Aerospace (Jetstream) Model 4101 airplanes,
that requires revising the Airworthiness Limitations Section of the
Instructions for Continued Airworthiness to incorporate life limits for
certain items and inspections to detect fatigue cracking in certain
structures. This amendment is prompted by issuance of a revision to the
airworthiness limitations of the British Aerospace J41 Aircraft
Maintenance Manual. The actions specified by this AD are intended to
ensure that fatigue cracking of certain structural elements is detected
and corrected; such fatigue cracking could adversely affect the
structural integrity of these airplanes.
DATES: Effective February 7, 2001.
ADDRESSES: Information pertaining to this amendment may be obtained
from British Aerospace Regional Aircraft American Support, 13850
Mclearen Road, Herndon, Virginia 20171. This information may be
examined at the Federal Aviation Administration (FAA), Transport
Airplane Directorate, Rules Docket, 1601 Lind Avenue, SW., Renton,
Washington.
FOR FURTHER INFORMATION CONTACT: Norman B. Martenson, Manager,
International Branch, ANM-116, FAA, Transport Airplane Directorate,
1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425)
227-2110; fax (425) 227-1149.
SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal
Aviation Regulations (14 CFR part 39) to include an airworthiness
directive (AD) that is applicable to all British Aerospace (Jetstream)
Model 4101 airplanes was published in the Federal Register on October
20, 2000 (65 FR 63023). That action proposed to require revising the
Airworthiness Limitations Section of the Instructions for Continued
Airworthiness to incorporate life limits for certain items and
inspections to detect fatigue cracking in certain structures.
Comments
Interested persons have been afforded an opportunity to participate
in the making of this amendment. No comments were submitted in response
to the proposal or the FAA's determination of the cost to the public.
Conclusion
The FAA has determined that air safety and the public interest
require the adoption of the rule as proposed.
Cost Impact
The FAA estimates that 59 airplanes of U.S. registry will be
affected by this AD, that it will take approximately 1 work hour per
airplane to accomplish
[[Page 265]]
the proposed actions, and that the average labor rate is $60 per work
hour. Based on these figures, the cost impact of the AD on U.S.
operators is estimated to be $3,540, or $60 per airplane.
The cost impact figure discussed above is based on assumptions that
no operator has yet accomplished any of the requirements of this AD
action, and that no operator would accomplish those actions in the
future if this AD were not adopted. The cost impact figures discussed
in AD rulemaking actions represent only the time necessary to perform
the specific actions actually required by the AD. These figures
typically do not include incidental costs, such as the time required to
gain access and close up, planning time, or time necessitated by other
administrative actions.
Regulatory Impact
The regulations adopted herein will not have a substantial direct
effect on the States, on the relationship between the national
Government and the States, or on the distribution of power and
responsibilities among the various levels of government. Therefore, it
is determined that this final rule does not have federalism
implications under Executive Order 13132.
For the reasons discussed above, I certify that this action (1) is
not a ``significant regulatory action'' under Executive Order 12866;
(2) is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979); and (3) will not have a
significant economic impact, positive or negative, on a substantial
number of small entities under the criteria of the Regulatory
Flexibility Act. A final evaluation has been prepared for this action
and it is contained in the Rules Docket. A copy of it may be obtained
from the Rules Docket at the location provided under the caption
ADDRESSES.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Safety.
Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the
Administrator, the Federal Aviation Administration amends part 39 of
the Federal Aviation Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. Section 39.13 is amended by adding the following new
airworthiness directive:
2000-26-08 British Aerospace Regional Aircraft [Formerly Jetstream
Aircraft Limited; British Aerospace (Commercial Aircraft) Limited]:
Amendment 39-12058. Docket 99-NM-250-AD.
Applicability: All Model Jetstream 4101 airplanes, certificated
in any category.
Note 1: This AD applies to each airplane identified in the
preceding applicability provision, regardless of whether it has been
modified, altered, or repaired in the area subject to the
requirements of this AD. For airplanes that have been modified,
altered, or repaired so that the performance of the requirements of
this AD is affected, the owner/operator must request approval for an
alternative method of compliance in accordance with paragraph (c) of
this AD. The request should include an assessment of the effect of
the modification, alteration, or repair on the unsafe condition
addressed by this AD; and, if the unsafe condition has not been
eliminated, the request should include specific proposed actions to
address it.
Compliance: Required as indicated, unless accomplished
previously.
To ensure continued structural integrity of these airplanes,
accomplish the following:
Airworthiness Limitations Revision
(a) Within 30 days after the effective date of this AD, revise
the Airworthiness Limitations Section (ALS) of the Instructions for
Continued Airworthiness by incorporating Section 05-10-10,
``Airworthiness Limitations Description and Operation,'' dated July
15, 1999, of the British Aerospace J41 Aircraft Maintenance Manual
(AMM) into the ALS.
(b) Except as provided by paragraph (c) of this AD: After the
actions specified in paragraph (a) of this AD have been
accomplished, no alternative inspections or inspection intervals may
be approved for the structural elements specified in the document
listed in paragraph (a) of this AD.
Alternative Methods of Compliance
(c) An alternative method of compliance or adjustment of the
compliance time that provides an acceptable level of safety may be
used if approved by the Manager, International Branch, ANM-116, FAA,
Transport Airplane Directorate. Operators shall submit their
requests through an appropriate FAA Principal Maintenance Inspector,
who may add comments and then send it to the Manager, International
Branch, ANM-116.
Note 2: Information concerning the existence of approved
alternative methods of compliance with this AD, if any, may be
obtained from the International Branch, ANM-116.
Special Flight Permits
(d) Special flight permits may be issued in accordance with
Secs. 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR
21.197 and 21.199) to operate the airplane to a location where the
requirements of this AD can be accomplished.
Effective Date
(e) This amendment becomes effective on February 7, 2001.
Issued in Renton, Washington, on December 22, 2000.
John J. Hickey,
Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 01-30 Filed 1-2-01; 8:45 am]
BILLING CODE 4910-13-U
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:33:21.366805+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- add7b483c22bc925abe34c7bc6bc350c561266bc617646c5df2409e8a152155c
- Text SHA-256
- fd6682c487fd67de62ac2e90977b529ce75130ad06b9d300567992353d11a57e
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.