Published 2002-08-07 · Federal Register document 02-19880
Airworthiness Directives; Boeing Model 727 Series Airplanes
Publication summary
This document corrects an inadvertent error that appeared in airworthiness directive (AD) 2002-12-13 that was published in the Federal Register on June 26, 2002 (67 FR 42985). The inadvertent error resulted in reference to an incorrect address for service information. This AD is applicable to all Boeing Model 727 series airplanes. This AD requires a review of maintenance records or a one-time test to determine if elevator hinge support ribs on the trailing edge of the horizontal stabilizer are made from a certain material, and follow-on repetitive inspections for corrosion or cracking of the elevator hinge support ribs, if necessary. For airplanes with the affected ribs installed, this AD eventually requires replacement of all affected ribs with new, improved ribs.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:07.262592+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2002-c8c2ee537a56d16c
- Source row
- results[284]
- Raw source SHA-256
- c8c2ee537a56d16c3d3246bbaa55e183792a136494260623f45827707b4e2a64
Correction notice · separate source edition
Recorded publication clauses
- AD identifier printed in this edition
- 2002-12-13
- Effective date printed in this edition
- Unknown
This correction is a separate source edition; it is not counted as a new adopted rule.
No adopted-clause structure was recorded for this source edition. Read the complete text; no applicability conclusion has been inferred.
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2002-12-13 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: f343e1c9be1327c1183d107b53cb55833d5a50dbaa218706b8cc81b8d70f06c8. Source manifest: 7d3005cc8bfa5f61cef706a75bbc54977d68f349b7c92f39b8e5ee7f7c668f22.
Official source · 2002-08-07
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 67, Number 152 (Wednesday, August 7, 2002)]
[Rules and Regulations]
[Pages 51069-51070]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 02-19880]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 2001-NM-233-AD; Amendment 39-12785; AD 2002-12-13]
RIN 2120-AA64
Airworthiness Directives; Boeing Model 727 Series Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: This document corrects an inadvertent error that appeared in
airworthiness directive (AD) 2002-12-13 that was published in the
Federal Register on June 26, 2002 (67 FR 42985). The inadvertent error
resulted in reference to an incorrect address for service information.
This AD is applicable to all Boeing Model 727 series airplanes. This AD
requires a review of maintenance records or a one-time test to
determine if elevator hinge support ribs on the trailing edge of the
horizontal stabilizer are made from a certain material, and follow-on
repetitive inspections for corrosion or cracking of the elevator hinge
support ribs, if necessary. For airplanes with the affected ribs
installed, this AD eventually requires replacement of all affected ribs
with new, improved ribs.
DATES: Effective July 31, 2002.
FOR FURTHER INFORMATION CONTACT: Technical Information: Duong Tran,
Aerospace Engineer, Airframe Branch, ANM-120S, FAA, Seattle Aircraft
Certification Office, 1601 Lind Avenue, SW., Renton, Washington 98055-
4056; telephone (425) 227-2773; fax (425) 227-1181.
Other Information: Judy Golder, Airworthiness Directive Technical
Editor/Writer; telephone (425) 687-4241, fax (425) 227-1232. Questions
or comments may also be sent via the Internet using the following
address: [email protected]. Questions or comments sent via the
Internet as attached electronic files must be formatted in Microsoft
Word 97 for Windows or ASCII text.
SUPPLEMENTARY INFORMATION: Airworthiness Directive (AD) 2002-12-13,
amendment 39-12785, applicable to all Boeing Model 727 series
airplanes, was published in the Federal Register on June 26, 2002 (67
FR 42985). That AD requires a review of maintenance records or a one-
time test to determine if elevator hinge support ribs on the trailing
edge of the horizontal stabilizer are made from a certain material, and
follow-on repetitive inspections for corrosion or cracking of the
elevator hinge support ribs, if necessary. For airplanes with the
affected ribs installed, this AD eventually requires replacement of all
affected ribs with new, improved ribs.
As published, paragraph (h) of that AD contained an incorrect
address for obtaining copies of service information. Paragraph (h) of
that AD identifies Airbus Industrie, 1 Rond Point Maurice Bellonte,
31707 Blagnac Cedex, France, as the appropriate address for obtaining
copies of service information. However, the correct address is Boeing
[[Page 51070]]
Commercial Airplane Group, P.O. Box 3707, Seattle, Washington 98124-
2207.
Since no other part of the regulatory information has been changed,
the final rule is not being republished in the Federal Register.
The effective date of this AD remains July 31, 2002.
Sec. 39.13 [Corrected]
On page 42989 of AD 2002-12-13, in the third column of paragraph
(h) on the fourth line following the table, correct the sentence,
``Copies may be obtained from Airbus Industrie, 1 Rond Point Maurice
Bellonte, 31707 Blagnac Cedex, France,'' to read ``Copies may be
obtained from Boeing Commercial Airplane Group, P.O. Box 3707, Seattle,
Washington 98124-2207.''
Issued in Renton, Washington, on July 29, 2002.
Vi L. Lipski,
Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 02-19880 Filed 8-6-02; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:19:00.546787+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- bcc5519ab17f8b0f7f3eb3342d5442af1bc56a11e58cab3f6f46eba5a08dc9f2
- Text SHA-256
- f343e1c9be1327c1183d107b53cb55833d5a50dbaa218706b8cc81b8d70f06c8
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.