Airworthiness Directives; Saab Model SAAB SF340A and SAAB 340B Series Airplanes

[Federal Register Volume 70, Number 1 (Monday, January 3, 2005)]
[Rules and Regulations]
[Page 10]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-28653]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. 2002-NM-182-AD; Amendment 39-13882; AD 2004-24-06]
RIN 2120-AA64


Airworthiness Directives; Saab Model SAAB SF340A and SAAB 340B 
Series Airplanes

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: This document corrects a typographical error that appeared in 
airworthiness directive (AD) 2004-24-06 that was published in the 
Federal Register on November 30, 2004 (69 FR 69505). The typographical 
error resulted in incorrect reference to certain main landing gear 
(MLG) part numbers as retract actuator bracket attachment bolt (RABAB) 
part numbers. This AD is applicable to certain Saab Model SAAB SF340A 
and SAAB 340B series airplanes. This AD requires replacement of the 
RABAB of the MLG with a new RABAB; reidentification of the MLG shock 
strut; an inspection for corrosion, fretting, or other damage of 
certain RABABs; and applicable corrective actions.

DATES: Effective January 4, 2005.

FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer; 
International Branch, ANM-116, FAA, Transport Airplane Directorate, 
1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 
227-2125; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION: Airworthiness Directive (AD) 2004-24-06, 
amendment 39-13882, applicable to certain Saab Model SAAB SF340A and 
SAAB 340B series airplanes, was published in the Federal Register on 
November 30, 2004 (69 FR 69505). That AD requires replacement of the 
retract actuator bracket attachment bolt (RABAB) of the main landing 
gear (MLG) with a new RABAB; reidentification of the MLG shock strut; 
an inspection for corrosion, fretting, or other damage of certain 
RABABs; and applicable corrective actions.
    As published, the AD contains an incorrect reference to the old 
RABAB part number. Instead of the RABAB part number, certain MLG 
assembly part numbers were listed as RABAB part numbers.
    Since no other part of the regulatory information has been changed, 
the final rule is not being republished in the Federal Register.
    The effective date of this AD remains January 4, 2005.


Sec.  39.13  [Corrected]

0
In the Federal Register of November 30, 2004, on page 69506, make the 
following corrections:
0
1. In the first column, following instruction 2, the airworthiness 
directive number ``2004-24-067'' is corrected to read ``2004-24-06'';

0
2. In the second column, paragraph (c) of this AD 2004-24-06 is 
corrected to read as follows:
* * * * *
    (c) As of the effective date of this AD, no person may install a 
MLG shock strut, part number (P/N) AIR83022-5 through -18 inclusive, or 
P/N AIR83064-1 through -5 inclusive, on any airplane; and no person may 
install a RABAB, P/N AIR124792, on any MLG shock strut.
* * * * *

    Issued in Renton, Washington, on December 21, 2004.
Kevin M. Mullin,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 04-28653 Filed 12-28-04; 1:42 pm]
BILLING CODE 4910-13-P

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:59:53.725288+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256

a9de14793403684912a9fac5bd5babf78741e74ece5e1b0e1af5f8caf66a09e6

Text SHA-256

23f6fc9446191ff32db33facacf00482aae284f89d9f1d73fcebc77c34a365fc