Published 2004-04-13 · Federal Register document 04-8296
Airworthiness Directives; Boeing Model 737-300, -400, and -500 Series Airplanes
Publication summary
This document corrects a typographical error that appeared in airworthiness directive (AD) 2004-04-03 that was published in the Federal Register on February 18, 2004 (69 FR 7565). The typographical error resulted in a reference to an incorrect effective date in the compliance time specified in Table 1 of the AD for Group 1 airplanes. This AD is applicable to certain Boeing Model 737 series airplanes. This AD requires a one-time general visual inspection of the seat locks and seat tracks of the flightcrew seats to ensure that the seats lock in position and to verify that lock nuts and bolts of adequate length are installed on the rear track lock bracket, and corrective action, if necessary.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:13.905821+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2004-cb1e1f18d61cac01
- Source row
- results[167]
- Raw source SHA-256
- cb1e1f18d61cac01616802134d899b0c8ce1a9f79716b5ee037f78e4cb53a00a
Correction notice · separate source edition
Recorded publication clauses
- AD identifier printed in this edition
- 2004-04-03
- Effective date printed in this edition
- Unknown
This correction is a separate source edition; it is not counted as a new adopted rule.
No adopted-clause structure was recorded for this source edition. Read the complete text; no applicability conclusion has been inferred.
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2004-04-03 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 71e4f9da82a4be5947b0392ebe8f75511e59505506c40c23df6d5276bb4e12e5. Source manifest: bb6b0b6101a44e9b43241b8f1e0355549c1ccfeaa463dc78ff90e14f60d21514.
Official source · 2004-04-13
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 69, Number 71 (Tuesday, April 13, 2004)]
[Rules and Regulations]
[Page 19313]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-8296]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 2002-NM-174-AD; Amendment 39-13483; AD 2004-04-03
RIN 2120-AA64
Airworthiness Directives; Boeing Model 737-300, -400, and -500
Series Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: This document corrects a typographical error that appeared in
airworthiness directive (AD) 2004-04-03 that was published in the
Federal Register on February 18, 2004 (69 FR 7565). The typographical
error resulted in a reference to an incorrect effective date in the
compliance time specified in Table 1 of the AD for Group 1 airplanes.
This AD is applicable to certain Boeing Model 737 series airplanes.
This AD requires a one-time general visual inspection of the seat locks
and seat tracks of the flightcrew seats to ensure that the seats lock
in position and to verify that lock nuts and bolts of adequate length
are installed on the rear track lock bracket, and corrective action, if
necessary.
DATES: Effective March 24, 2004.
FOR FURTHER INFORMATION CONTACT: Shannon Lennon, Aerospace Engineer,
Cabin Safety and Environmental Systems Branch, ANM-150S, FAA, Seattle
Aircraft Certification Office, 1601 Lind Avenue, SW., Renton,
Washington; telephone (425) 917-6436; fax (425) 917-6590.
SUPPLEMENTARY INFORMATION: Airworthiness Directive (AD) 2004-04-03,
amendment 39-13483, applicable to certain Boeing Model 737 series
airplanes, was published in the Federal Register on February 18, 2004
(69 FR 7565). That AD requires a one-time general visual inspection of
the seat locks and seat tracks of the flightcrew seats to ensure that
the seats lock in position and to verify that lock nuts and bolts of
adequate length are installed on the rear track lock bracket, and
corrective action, if necessary.
As published, that final rule incorrectly specifies ``September 26,
2001'' as the effective date for AD 2000-10-21 in the compliance time
specified for Group 1 airplanes in Table 1 of that final rule. The
correct effective date of AD 2000-10-21 is ``June 12, 2000.'' It was
the FAA's intent that operators use June 12, 2000, to determine the
compliance time for Group 1 airplanes as specified in Table 1 of that
final rule, as evidenced by the explanatory parenthetical reference
``(the effective date of AD 2000-10-21, amendment 39-11745).''
Since no other part of the regulatory information has been changed,
the final rule is not being republished in the Federal Register.
The effective date of this AD remains March 24, 2004.
Sec. 39.13 [Corrected]
On page 7566, the second column of Table 1 of AD 2004-04-03 is
corrected to read as follows:
* * * * *
Table 1.--Compliance Time/Service Bulletin
------------------------------------------------------------------------
Airplanes-- Compliance time-- Service bulletin--
------------------------------------------------------------------------
For Group 1 airplanes listed in Within 90 days Boeing Alert
Boeing Alert Service Bulletin after June 12, Service Bulletin
737-25A1363, Revision 1, dated 2000 (the 737-25A1363,
March 28, 2002. effective date of dated November 5,
AD 2000-10-21, 1998.
amendment 39-
11745).
For Group 2 airplanes listed in Within 90 days Boeing Alert
Boeing Alert Service Bulletin after the Service Bulletin
737-25A1363, Revision 1, dated effective date of 737-25A1363,
March 28, 2002. this AD. Revision 1, dated
March 28, 2002.
------------------------------------------------------------------------
* * * * *
Issued in Renton, Washington, on April 1, 2004.
Kalene C. Yanamura,
Acting Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 04-8296 Filed 4-12-04; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:06:02.541820+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- 36f0d662fcf097a1ca932780392c6a641916450d0257f85dc7f137ebeaa02089
- Text SHA-256
- 71e4f9da82a4be5947b0392ebe8f75511e59505506c40c23df6d5276bb4e12e5
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.