Back to publication catalog

Published 2004-05-03 · Federal Register document 04-9899

Airworthiness Directives; Boeing Model 747 Series Airplanes

Publication summary

This document corrects a typographical error that appeared in airworthiness directive (AD) 2004-07-22 that was published in the Federal Register on April 7, 2004 (69 FR 18250). The typographical error resulted in reference to an incorrect paragraph number. This AD is applicable to all Boeing Model 747 series airplanes. This AD requires that the FAA-approved maintenance inspection program be revised to include inspections that will give no less than the required damage tolerance rating for each structural significant item, and repair of cracked structure.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:13.905821+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2004-cb1e1f18d61cac01
Source row
results[199]
Raw source SHA-256
cb1e1f18d61cac01616802134d899b0c8ce1a9f79716b5ee037f78e4cb53a00a

Correction notice · separate source edition

Recorded publication clauses

AD identifier printed in this edition
2004-07-22
Effective date printed in this edition
Unknown

This correction is a separate source edition; it is not counted as a new adopted rule.

No adopted-clause structure was recorded for this source edition. Read the complete text; no applicability conclusion has been inferred.

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2004-07-22 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 55775fb02a6f773b9c91b345118d7a4f07e09766558e91332dbe70a22db570fc. Source manifest: bc6415aadee7789df6e6db7ebafb166fbc53d39613ccf85a837e0c3be7da28ae.

Official source · 2004-05-03

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 69, Number 85 (Monday, May 3, 2004)]
[Rules and Regulations]
[Page 24063]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-9899]



========================================================================
Rules and Regulations
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains regulatory documents 
having general applicability and legal effect, most of which are keyed 
to and codified in the Code of Federal Regulations, which is published 
under 50 titles pursuant to 44 U.S.C. 1510.

The Code of Federal Regulations is sold by the Superintendent of Documents. 
Prices of new books are listed in the first FEDERAL REGISTER issue of each 
week.

========================================================================


Federal Register / Vol. 69, No. 85 / Monday, May 3, 2004 / Rules and 
Regulations

[[Page 24063]]



DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. 2003-NM-47-AD; Amendment 39-13566; AD 2004-07-22]
RIN 2120-AA64


Airworthiness Directives; Boeing Model 747 Series Airplanes

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: This document corrects a typographical error that appeared in 
airworthiness directive (AD) 2004-07-22 that was published in the 
Federal Register on April 7, 2004 (69 FR 18250). The typographical 
error resulted in reference to an incorrect paragraph number. This AD 
is applicable to all Boeing Model 747 series airplanes. This AD 
requires that the FAA-approved maintenance inspection program be 
revised to include inspections that will give no less than the required 
damage tolerance rating for each structural significant item, and 
repair of cracked structure.

DATES: Effective May 12, 2004.

FOR FURTHER INFORMATION CONTACT: Tamara L. Anderson, Aerospace 
Engineer, Airframe Branch, ANM-120S, FAA, Transport Airplane 
Directorate, Seattle Aircraft Certification Office, 1601 Lind Avenue, 
SW., Renton, Washington 98055-4056; telephone (425) 917-6421; fax (425) 
917-6590.

SUPPLEMENTARY INFORMATION: Airworthiness Directive (AD) 2004-07-22, 
amendment 39-13566, applicable to all Boeing Model 747 series 
airplanes, was published in the Federal Register on April 7, 2004 (69 
FR 18250). That AD requires that the FAA-approved maintenance 
inspection program be revised to include inspections that will give no 
less than the required damage tolerance rating for each structural 
significant item, and repair of cracked structure.
    As published, Note 1 of the AD has a typographical error in the 
paragraph reference of the sentence ``requesting approval for an 
alternative method of compliance per paragraph (h)(1) of this AD.'' The 
correct reference is paragraph (g)(1) of this AD.
    Since no other part of the regulatory information has been changed, 
the final rule is not being republished in the Federal Register.
    The effective date of this AD remains May 12, 2004.


Sec.  39.13  [Corrected]

0
On page 18254, in the first column, Note 1 of AD 2004-07-22 is 
corrected to read as follows:
* * * * *

    Note 1: * * * For airplanes that have been modified, altered, or 
repaired so that the performance of the requirements of this AD is 
affected, the owner/operator must request approval for an 
alternative method of compliance per paragraph (g)(1) of this AD. * 
* *

* * * * *

    Issued in Renton, Washington, on April 21, 2004.
Kalene C. Yanamura,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 04-9899 Filed 4-30-04; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:05:30.680653+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
145b6063c354342a2d9d723471becd6f71807402089945d2bf2fc65704abe82b
Text SHA-256
55775fb02a6f773b9c91b345118d7a4f07e09766558e91332dbe70a22db570fc

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.