Back to publication catalog

Published 2005-05-25 · Federal Register document 05-10424

Airworthiness Directives; Boeing Model 747 Series Airplanes

Publication summary

The FAA is correcting a typographical error in an existing airworthiness directive (AD) that was published in the Federal Register on April 25, 2005 (70 FR 21141). The error resulted in omission of a reference to an inspection area. This AD applies to all Boeing Model 747 series airplanes. This AD requires repetitive inspections for cracking of the top and side panel webs and panel stiffeners of the nose wheel well (NWW), and corrective actions if necessary.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:17.300228+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2005-5d43d153038ee1c1
Source row
results[207]
Raw source SHA-256
5d43d153038ee1c1c214f5c3688e38e25e37b832227fe65d52f7420a65ee20f2

Correction notice · separate source edition

Recorded publication clauses

AD identifier printed in this edition
2005-09-02
Effective date printed in this edition
Unknown

This correction is a separate source edition; it is not counted as a new adopted rule.

No adopted-clause structure was recorded for this source edition. Read the complete text; no applicability conclusion has been inferred.

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2005-09-02 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 585bf334f4b336c4f2d5153726b593e418cee99cca62d969093aa941f20bcec0. Source manifest: 9dbe4e8dc6c6561d610ffa876749900df029009abf8f0e775533c68faabaf188.

Official source · 2005-05-25

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 70, Number 100 (Wednesday, May 25, 2005)]
[Rules and Regulations]
[Pages 29940-29941]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-10424]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2005-21027; Directorate Identifier 2005-NM-048-AD; 
Amendment 39-14070; AD 2005-09-02]
RIN 2120-AA64


Airworthiness Directives; Boeing Model 747 Series Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: The FAA is correcting a typographical error in an existing 
airworthiness directive (AD) that was published in the Federal Register 
on April 25, 2005 (70 FR 21141). The error resulted in omission of a 
reference to an inspection area. This AD applies to all Boeing Model 
747 series airplanes. This AD requires repetitive inspections for 
cracking of the top and side panel webs and panel stiffeners of the 
nose wheel well (NWW), and corrective actions if necessary.

DATES: Effective May 10, 2005.

ADDRESSES: The AD docket contains the proposed AD, comments, and any 
final disposition. You can examine the AD docket on the Internet at 
http://dms.dot.gov, or in person at the Docket Management Facility 
office between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The Docket Management Facility office (telephone (800) 647-
5227) is located on the plaza level of the Nassif Building at the U.S. 
Department of Transportation, 400 Seventh Street SW., room PL-401, 
Washington, DC. This docket number is FAA-2005-21027; the directorate 
identifier for this docket is 2005-NM-048-AD.

FOR FURTHER INFORMATION CONTACT: Nick Kusz, Airframe Branch, ANM-120S, 
FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue, SW., 
Renton, Washington 98055-4056; telephone (425) 917-6432; fax (425) 917-
6590.

SUPPLEMENTARY INFORMATION: On April 13, 2005, the FAA issued AD 2005-
09-02, amendment 39-14070 (70 FR 21141, April 25, 2005), for all Boeing 
Model 747 series airplanes. This AD requires repetitive inspections for 
cracking of the top and side panel webs and panel stiffeners of the 
nose wheel well (NWW), and corrective actions if necessary.
    As published, we inadvertently did not specify a certain area for a 
required

[[Page 29941]]

inspection. Where paragraph (i) of the AD specifies ``Do a UT 
inspection of the sidewall panel web for cracks, * * *,'' the correct 
areas to inspect are the top and sidewall panel web. References to the 
inspection areas are all identified correctly in all other parts of the 
AD.
    No other part of the regulatory information has been changed; 
therefore, the final rule is not republished in the Federal Register.
    The effective date of this AD remains May 10, 2005.

PART 39--[AMENDED]


Sec.  39.13  [Corrected]

0
In the Federal Register of April 25, 2005, on page 21144, in the second 
column, paragraph (i) of AD 2005-09-02 is corrected to read as follows:
* * * * *
    (i) Do a UT inspection of the top and sidewall panel webs for 
cracks, in accordance with Boeing ASB 747-53A2465, Revision 4, dated 
February 24, 2005, at the later of the times specified in paragraphs 
(i)(l) and (i)(2) of this AD. Repeat the inspections thereafter at 
intervals not to exceed 500 flight cycles.
* * * * *

    Issued in Renton, Washington, on May 16, 2005.
Michael J. Kaszycki,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 05-10424 Filed 5-24-05; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:55:10.697687+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
a27f0b165059926580eaca03752385da15993715f553651ca37d634b5a33ca69
Text SHA-256
585bf334f4b336c4f2d5153726b593e418cee99cca62d969093aa941f20bcec0

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.