Back to publication catalog

Published 2005-06-22 · Federal Register document 05-12175

Airworthiness Directives; Cessna Aircraft Company Models 172R, 172S, 182T, T182T, 206H, and T206H Airplanes

Publication summary

The FAA adopts a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Models 172R, 172S, 182T, T182T, 206H, and T206H airplanes. This AD requires you to inspect any MC01-3A I.C. 9 or MC01-3A I.C. 10 main electrical power junction box circuit breakers for correct amperage (amp) (a correct 40-amp circuit breaker) and replace any incorrect amp circuit breaker with the correct 40-amp circuit breaker. This AD results from several reports of circuit breakers that are not the correct 40-amp circuit breaker installed in the MC01-3A main electrical power junction box. We are issuing this AD to replace any incorrect circuit breaker installed in the MC01-3A I.C. 9 or MC01-3A I.C. 10 main electrical power junction box, which could result in premature tripping of the power junction box main feeder circuit breakers and could lead to partial or complete loss of all electrical power on the airplane. This condition could lead to the loss of all navigation and communication equipment and lighting in the cockpit.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:17.300228+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2005-5d43d153038ee1c1
Source row
results[254]
Raw source SHA-256
5d43d153038ee1c1c214f5c3688e38e25e37b832227fe65d52f7420a65ee20f2

Final-rule publication

Recorded publication clauses

AD identifier printed in this edition
2005-13-10
Effective date printed in this edition
2005-08-09
Read 8 complete recorded clauses
When Does This AD Become Effective?
When Does This AD Become Effective?

    (a) This AD becomes effective on August 9, 2005.

Exact source excerpt. Text positions 10658–10749, end exclusive, in the original decoded publication. SHA-256: d5294bc11d6b8f77f7d663145ddb61e48518f6bdc03ac91d18194265c586892d

What Other ADs Are Affected by This Action?
What Other ADs Are Affected by This Action?

    (b) None.

Exact source excerpt. Text positions 10749–10809, end exclusive, in the original decoded publication. SHA-256: 07ddca3e2ddd18af7ec96332163aefb7f30c8d066e5f6fc3b158d5fa460e1365

Applicability wording · What Airplanes Are Affected by This AD?
What Airplanes Are Affected by This AD?

    (c) This AD affects the following airplane models and serial 
numbers that are certificated in any category:

------------------------------------------------------------------------
              Model                             Serial Nos.
------------------------------------------------------------------------
172R.............................  17281186 through 17281232.
172S.............................  172S9476 through 172S9689, and
                                    172S9691 through 172S9770.
182T.............................  18281242 through 18281502, 18281506,
                                    and 18281507.
T182T............................  T18208212 through T18208357.
206H.............................  20608195 through 20608223, 20608225,
                                    and 20608226.
T206H............................  T20608410 through T20608475,
                                    T20608477 through T20608501,
                                    T20608503, and T20608506.
------------------------------------------------------------------------

Exact source excerpt. Text positions 10809–11934, end exclusive, in the original decoded publication. SHA-256: 7db14bd9cceea0e30cf1fb75db5558cc479f4b74c35af6da2a41a6647dd75652

What Is the Unsafe Condition Presented in This AD?
What Is the Unsafe Condition Presented in This AD?

    (d) This AD is the result of several reports of circuit breakers 
that are not the correct 40-amp circuit breaker installed in the 
MC01-3A I.C. 9 or MC01-3A I.C. 10 main electrical power junction 
box. The actions specified in this AD are intended to replace any 
incorrect circuit breaker installed in the MC01-3A main electrical 
power junction box, which could result in premature tripping of the 
power junction box main feeder circuit breakers and could lead to 
partial or complete loss of all electrical power on the airplane. 
This condition could lead to the loss of all navigation and 
communication equipment and lighting in the cockpit.

Exact source excerpt. Text positions 11934–12641, end exclusive, in the original decoded publication. SHA-256: d1b257dbd67ccfd8d1d90f16c2953e0496de3e3ce5182608f4a2b8c748b1c5d2

What Must I Do To Address This Problem?
What Must I Do To Address This Problem?

    (e) To address this problem, you must do the following:

------------------------------------------------------------------------
           Actions                 Compliance            Procedures
------------------------------------------------------------------------
(1) Inspect any MC01-3A I.C.  Within the next 30    Follow Cessna
 9 (part number (P/N) S3100-   days after August     Service Bulletin
 297) or MC01-3A I.C. 10 (P/   9, 2005 (the          No. SB05-24-01,
 N S3100-344) main             effective dated       January 31, 2005.
 electrical power junction     date of this AD),
 box for any incorrect         unless already done.
 amperage (amp) circuit
 beaker installed in place
 of the required 40-amp
 circuit breakers.
-----------------------------
(2) Replace any incorrect     Before further        Follow Cessna
 amp circuit breaker with      flight after the      Service Bulletin
 the required 40-amp circuit   inspection required   No. SB05-24-01,
 breaker.                      by paragraph (e)(1)   dated January 31,
                               of this AD.           2005.
-----------------------------
(3) Only install in any MC01- As of August 9, 2005  Not Applicable.
 3A I.C. 9 (P/N S3100-297)     (the effective date
 or MC01-3A I.C. 10 (P/N       of this AD).
 S3100-344) main electrical
 power junction box the
 required 40-amp circuit
 breakers.
------------------------------------------------------------------------

Exact source excerpt. Text positions 12641–14148, end exclusive, in the original decoded publication. SHA-256: e1c83e6b23b164f40b41a71cfdae8acf98caa5ab43229e00e43177dbbd4c976e

May I Request an Alternative Method of Compliance?
May I Request an Alternative Method of Compliance?

    (f) You may request a different method of compliance or a 
different compliance time for this AD by following the procedures in 
14 CFR 39.19. Unless FAA authorizes otherwise, send your request to 
your principal inspector. The principal inspector may add comments 
and will send your request to the Manager, Wichita Aircraft 
Certification Office (ACO), FAA. For information on any already 
approved alternative methods of compliance, contact Jose Flores, 
Aerospace Engineer, Wichita ACO, FAA, 1801 Airport Road, Wichita, 
Kansas 67209; telephone: (316) 946-4133; facsimile: (316) 946-4107.

Exact source excerpt. Text positions 14148–14798, end exclusive, in the original decoded publication. SHA-256: 6e4af6ec141ec2fde845bcd7a8695bd26eded887db649a329cf96f994bcd96f6

May I Obtain a Special Flight Permit for the Initial Inspection Requirement of This AD?
May I Obtain a Special Flight Permit for the Initial Inspection 
Requirement of This AD?

    (g) Yes, special flight permits are allowed per 14 CFR 39.19 
provided airplane operations are limited to Day and/or visual flight 
rules (VFR) flight.

Exact source excerpt. Text positions 14798–15045, end exclusive, in the original decoded publication. SHA-256: 141334ea68db68bda4a51200edd29f42530077565f2e24ebdde19137e61ad472

Does This AD Incorporate Any Material by Reference?
Does This AD Incorporate Any Material by Reference?

    (h) You must do the actions required by this AD following the 
instructions in Cessna Service Bulletin No. SB05-24-01, dated 
January 31, 2005. The Director of the Federal Register approved the 
incorporation by reference of this service bulletin in accordance 
with 5 U.S.C. 552(a) and 1 CFR part 51. To get a copy of this 
service information, contact Cessna Aircraft Company, Product 
Support, P.O. Box 7706, Wichita, Kansas 67277; telephone: (316) 517-
5800; facsimile: (316) 942-9006. To review copies of this service 
information, go to the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html or call (202) 741-6030. To 
view the AD docket, go to the Docket Management Facility; U.S. 
Department of Transportation, 400 Seventh Street, SW., Nassif 
Building, Room PL-401, Washington, DC 20590-001 or on the Internet 
at http://dms.dot.gov. The docket number is FAA-2005-20438; 
Directorate Identifier 2005-CE-03-AD.


[[Page 36000]]

Exact source excerpt. Text positions 15045–16200, end exclusive, in the original decoded publication. SHA-256: 248483c5c673e32ceb17b93ca9fbba396b26acd3d29611de83e575da6645b529

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2005-13-10 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: f6be2fc8963d264cfd6d37cb2e7ed85f9ecbe86ba044cf7f3e285b6e5dafe5d3. Source manifest: f24a803320f24e96cf57b52ad79515d178527d70873732b35a170d30d8fcbe9b.

Official source · 2005-06-22

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 70, Number 119 (Wednesday, June 22, 2005)]
[Rules and Regulations]
[Pages 35997-36000]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-12175]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2005-20438; Directorate Identifier 2005-CE-03-AD; 
Amendment 39-14147; AD 2005-13-10]
RIN 2120-AA64


Airworthiness Directives; Cessna Aircraft Company Models 172R, 
172S, 182T, T182T, 206H, and T206H Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA adopts a new airworthiness directive (AD) for certain 
Cessna Aircraft Company (Cessna) Models 172R, 172S, 182T, T182T, 206H, 
and T206H airplanes. This AD requires you to inspect any MC01-3A I.C. 9 
or MC01-3A I.C. 10 main electrical power junction box circuit breakers 
for correct amperage (amp) (a correct 40-amp circuit breaker) and 
replace any incorrect amp circuit breaker with the correct 40-amp 
circuit breaker. This AD results from several reports of circuit 
breakers that are not the correct 40-amp circuit breaker installed in 
the MC01-3A main electrical power junction box. We are issuing this AD 
to replace any incorrect circuit breaker installed in the MC01-3A I.C. 
9 or MC01-3A I.C. 10 main electrical power junction box, which could 
result in premature tripping of the power junction box main feeder 
circuit breakers and could lead to partial or complete loss of all 
electrical power on the airplane. This condition could lead to the loss 
of all navigation and communication equipment and lighting in the 
cockpit.

DATES: This AD becomes effective on August 9, 2005.
    As of August 9, 2005, the Director of the Federal Register approved 
the incorporation by reference of certain publications listed in the 
regulation.

ADDRESSES: To get the service information identified in this AD, 
contact Cessna Aircraft Company, Product Support, P.O. Box 7706, 
Wichita, Kansas 67277; telephone: (316) 517-5800; facsimile: (316) 942-
9006.
    To view the AD docket, go to the Docket Management Facility; U.S. 
Department of Transportation, 400 Seventh Street, SW., Nassif Building, 
Room PL-401, Washington, DC 20590-001 or on the Internet at http://dms.dot.gov. The docket number is FAA-2005-20438; Directorate 
Identifier 2005-CE-03-AD.

[[Page 35998]]


FOR FURTHER INFORMATION CONTACT: Jose Flores, Aerospace Engineer, 
Wichita Aircraft Certification Office (ACO), FAA, 1801 Airport Road, 
Wichita, Kansas 67209; telephone: (316) 946-4133; facsimile: (316) 946-
4107.

SUPPLEMENTARY INFORMATION: 

Discussion

    What events have caused this AD? Cessna has reported three cases of 
incorrect amperage (amp) circuit breakers installed in the MC01-3A I.C. 
9 (part number (P/N) S3100-297) or MC01-3A I.C. 10 (P/N S3100-344) main 
electrical power junction box. The design of the main electrical power 
junction box requires 40-amp circuit breakers. Two of the three cases 
of incorrect circuit breakers were found in Cessna production and a 
third was found in Cessna spares.
    What is the potential impact if FAA took no action? Any incorrect 
circuit breaker installed in the MC01-3A main electrical power junction 
box could result in premature tripping of the power junction box main 
feeder circuit breakers, which could lead to partial or complete loss 
of all electrical power on the airplane. This condition could lead to 
the loss of all navigation and communication equipment and lighting in 
the cockpit.
    Has FAA taken any action to this point? We issued a proposal to 
amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to 
include an AD that would apply to certain Cessna Aircraft Company 
(Cessna) Models 172R, 172S, 182T, T182T, 206H, and T206H airplanes. 
This proposal was published in the Federal Register as a notice of 
proposed rulemaking (NPRM) on March 17, 2005 (70 FR 12978). The NPRM 
proposed to require you to inspect any MC01-3A I.C. 9 or MC01-3A I.C. 
10 main electrical power junction box circuit breakers for correct 
amperage (amp) (a correct 40-amp circuit breaker) and replace any 
incorrect amp circuit breaker with the correct 40-amp circuit breaker.

Comments

    Was the public invited to comment? We provided the public the 
opportunity to participate in developing this AD. We received no 
comments on the proposal or on the determination of the cost to the 
public.

Conclusion

    What is FAA's final determination on this issue? We have carefully 
reviewed the available data and determined that air safety and the 
public interest require adopting the AD as proposed except for minor 
editorial corrections. We have determined that these minor corrections:

--Are consistent with the intent that was proposed in the NPRM for 
correcting the unsafe condition; and
--Do not add any additional burden upon the public than was already 
proposed in the NPRM.

Docket Information

    Where can I go to view the docket information? You may view the AD 
docket that contains information relating to this subject in person at 
the DMS Docket Offices between 9 a.m. and 5 p.m. (eastern standard 
time), Monday through Friday, except Federal holidays. The Docket 
Office (telephone 1-800-647-5227) is located on the plaza level of the 
Department of Transportation NASSIF Building at the street address 
stated in ADDRESSES. You may also view the AD docket on the Internet at 
http://dms.dot.gov.

Changes to 14 CFR Part 39--Effect on the AD

    How does the revision to 14 CFR part 39 affect this AD? On July 10, 
2002, the FAA published a new version of 14 CFR part 39 (67 FR 47997, 
July 22, 2002), which governs the FAA's AD system. This regulation now 
includes material that relates to altered products, special flight 
permits, and alternative methods of compliance. This material 
previously was included in each individual AD. Since this material is 
included in 14 CFR part 39, we will not include it in future AD 
actions.

Costs of Compliance

    How many airplanes does this AD impact? We estimate that this AD 
affects 778 airplanes in the U.S. registry.
    What is the cost impact of this AD on owners/operators of the 
affected airplanes? We estimate the following costs to do the 
inspection:

----------------------------------------------------------------------------------------------------------------
                                                               Total cost per
             Labor cost                      Parts cost           airplane       Total cost on  U.S. operators
----------------------------------------------------------------------------------------------------------------
1 work hour x $65 = $65.............  None...................             $65  778 x $65 = $50,570.
----------------------------------------------------------------------------------------------------------------

    We estimate the following costs to do any necessary replacements 
that would be required based on the results of this inspection. We have 
no way of determining the number of airplanes that may need this 
replacement:

------------------------------------------------------------------------
                                                          Total cost per
               Labor cost                   Parts cost       airplane
------------------------------------------------------------------------
1 work hour x $65 = $65.................             $40            $105
------------------------------------------------------------------------

Authority for This Rulemaking

    What authority does FAA have for issuing this rulemaking action? 
Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, Section 106 describes the 
authority of the FAA Administrator. Subtitle VII, Aviation Programs, 
describes in more detail the scope of the agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701, ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this AD.

Regulatory Findings

    Will this AD impact various entities? We have determined that this 
AD will not have federalism implications under Executive Order 13132. 
This AD will not have a substantial direct effect on the States, on the 
relationship between the National Government and the States, or on the 
distribution of power and responsibilities among the various levels of 
government.

[[Page 35999]]

    Will this AD involve a significant rule or regulatory action? For 
the reasons discussed above, I certify that this AD:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979); and
    3. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.
    We prepared a summary of the costs to comply with this AD (and 
other information as included in the Regulatory Evaluation) and placed 
it in the AD Docket. You may get a copy of this summary by sending a 
request to us at the address listed under ADDRESSES. Include ``Docket 
No. FAA-2005-20438; Directorate Identifier 2005-CE-03-AD'' in your 
request.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

0
Accordingly, under the authority delegated to me by the Administrator, 
the Federal Aviation Administration amends part 39 of the Federal 
Aviation Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. FAA amends Sec.  39.13 by adding a new AD to read as follows:

2005-13-10 Cessna Aircraft Company: Amendment 39-14147; Docket No. 
FAA-2005-20438; Directorate Identifier 2005-CE-03-AD.

When Does This AD Become Effective?

    (a) This AD becomes effective on August 9, 2005.

What Other ADs Are Affected by This Action?

    (b) None.

What Airplanes Are Affected by This AD?

    (c) This AD affects the following airplane models and serial 
numbers that are certificated in any category:

------------------------------------------------------------------------
              Model                             Serial Nos.
------------------------------------------------------------------------
172R.............................  17281186 through 17281232.
172S.............................  172S9476 through 172S9689, and
                                    172S9691 through 172S9770.
182T.............................  18281242 through 18281502, 18281506,
                                    and 18281507.
T182T............................  T18208212 through T18208357.
206H.............................  20608195 through 20608223, 20608225,
                                    and 20608226.
T206H............................  T20608410 through T20608475,
                                    T20608477 through T20608501,
                                    T20608503, and T20608506.
------------------------------------------------------------------------

What Is the Unsafe Condition Presented in This AD?

    (d) This AD is the result of several reports of circuit breakers 
that are not the correct 40-amp circuit breaker installed in the 
MC01-3A I.C. 9 or MC01-3A I.C. 10 main electrical power junction 
box. The actions specified in this AD are intended to replace any 
incorrect circuit breaker installed in the MC01-3A main electrical 
power junction box, which could result in premature tripping of the 
power junction box main feeder circuit breakers and could lead to 
partial or complete loss of all electrical power on the airplane. 
This condition could lead to the loss of all navigation and 
communication equipment and lighting in the cockpit.

What Must I Do To Address This Problem?

    (e) To address this problem, you must do the following:

------------------------------------------------------------------------
           Actions                 Compliance            Procedures
------------------------------------------------------------------------
(1) Inspect any MC01-3A I.C.  Within the next 30    Follow Cessna
 9 (part number (P/N) S3100-   days after August     Service Bulletin
 297) or MC01-3A I.C. 10 (P/   9, 2005 (the          No. SB05-24-01,
 N S3100-344) main             effective dated       January 31, 2005.
 electrical power junction     date of this AD),
 box for any incorrect         unless already done.
 amperage (amp) circuit
 beaker installed in place
 of the required 40-amp
 circuit breakers.
-----------------------------
(2) Replace any incorrect     Before further        Follow Cessna
 amp circuit breaker with      flight after the      Service Bulletin
 the required 40-amp circuit   inspection required   No. SB05-24-01,
 breaker.                      by paragraph (e)(1)   dated January 31,
                               of this AD.           2005.
-----------------------------
(3) Only install in any MC01- As of August 9, 2005  Not Applicable.
 3A I.C. 9 (P/N S3100-297)     (the effective date
 or MC01-3A I.C. 10 (P/N       of this AD).
 S3100-344) main electrical
 power junction box the
 required 40-amp circuit
 breakers.
------------------------------------------------------------------------

May I Request an Alternative Method of Compliance?

    (f) You may request a different method of compliance or a 
different compliance time for this AD by following the procedures in 
14 CFR 39.19. Unless FAA authorizes otherwise, send your request to 
your principal inspector. The principal inspector may add comments 
and will send your request to the Manager, Wichita Aircraft 
Certification Office (ACO), FAA. For information on any already 
approved alternative methods of compliance, contact Jose Flores, 
Aerospace Engineer, Wichita ACO, FAA, 1801 Airport Road, Wichita, 
Kansas 67209; telephone: (316) 946-4133; facsimile: (316) 946-4107.

May I Obtain a Special Flight Permit for the Initial Inspection 
Requirement of This AD?

    (g) Yes, special flight permits are allowed per 14 CFR 39.19 
provided airplane operations are limited to Day and/or visual flight 
rules (VFR) flight.

Does This AD Incorporate Any Material by Reference?

    (h) You must do the actions required by this AD following the 
instructions in Cessna Service Bulletin No. SB05-24-01, dated 
January 31, 2005. The Director of the Federal Register approved the 
incorporation by reference of this service bulletin in accordance 
with 5 U.S.C. 552(a) and 1 CFR part 51. To get a copy of this 
service information, contact Cessna Aircraft Company, Product 
Support, P.O. Box 7706, Wichita, Kansas 67277; telephone: (316) 517-
5800; facsimile: (316) 942-9006. To review copies of this service 
information, go to the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html or call (202) 741-6030. To 
view the AD docket, go to the Docket Management Facility; U.S. 
Department of Transportation, 400 Seventh Street, SW., Nassif 
Building, Room PL-401, Washington, DC 20590-001 or on the Internet 
at http://dms.dot.gov. The docket number is FAA-2005-20438; 
Directorate Identifier 2005-CE-03-AD.


[[Page 36000]]


    Issued in Kansas City, Missouri, on June 14, 2005.
John R. Colomy,
Acting Manager, Small Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 05-12175 Filed 6-21-05; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:54:22.803386+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
e5f039bd771482093d9d29bedac55a57de1a697be82e260f78ef6e98ed4936cb
Text SHA-256
f6be2fc8963d264cfd6d37cb2e7ed85f9ecbe86ba044cf7f3e285b6e5dafe5d3

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.