Back to publication catalog

Published 2005-09-30 · Federal Register document 05-19564

Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747SR, and 747SP Series Airplanes

Publication summary

The FAA is correcting a typographical error in an existing airworthiness directive (AD) that was published in the Federal Register on September 15, 2005 (70 FR 54474). The error resulted in an inadvertent reference to a nonexistent paragraph. This AD applies to certain Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747- 200C, 747-200F, 747-300, 747SR, and 747SP series airplanes. This AD requires repetitive detailed and ultrasonic inspections of the thrust links of the rear engine mounts for any crack or fracture and corrective actions if necessary.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:17.300228+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2005-5d43d153038ee1c1
Source row
results[418]
Raw source SHA-256
5d43d153038ee1c1c214f5c3688e38e25e37b832227fe65d52f7420a65ee20f2

Correction notice · separate source edition

Recorded publication clauses

AD identifier printed in this edition
2005-19-06
Effective date printed in this edition
Unknown

This correction is a separate source edition; it is not counted as a new adopted rule.

No adopted-clause structure was recorded for this source edition. Read the complete text; no applicability conclusion has been inferred.

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2005-19-06 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: dae1eac1cb7ac848e06d956a810fee754cb2a69b3e25943dd8db4f587cd2c696. Source manifest: 3aef725744f60d9cf88c81b06ebe2712b8ec65e7a7c0e3930de776e68170be3f.

Official source · 2005-09-30

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 70, Number 189 (Friday, September 30, 2005)]
[Rules and Regulations]
[Pages 57124-57125]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-19564]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2005-22413; Directorate Identifier 2005-NM-167-AD; 
Amendment 39-14271; AD 2005-19-06]
RIN 2120-AA64


Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-
100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747SR, and 747SP 
Series Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule; correction.

-----------------------------------------------------------------------

[[Page 57125]]

SUMMARY: The FAA is correcting a typographical error in an existing 
airworthiness directive (AD) that was published in the Federal Register 
on September 15, 2005 (70 FR 54474). The error resulted in an 
inadvertent reference to a nonexistent paragraph. This AD applies to 
certain Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-
200C, 747-200F, 747-300, 747SR, and 747SP series airplanes. This AD 
requires repetitive detailed and ultrasonic inspections of the thrust 
links of the rear engine mounts for any crack or fracture and 
corrective actions if necessary.

DATES: Effective September 30, 2005.

ADDRESSES: The AD docket contains the proposed AD, comments, and any 
final disposition. You may examine the AD docket on the Internet at 
http://dms.dot.gov, or in person at the Docket Management Facility 
office between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The Docket Management Facility office (telephone (800) 647-
5227) is located on the plaza level of the Nassif Building at the U.S. 
Department of Transportation, 400 Seventh Street SW., room PL-401, 
Washington, DC. This docket number is FAA-2005-22413; the directorate 
identifier for this docket is 2005-NM-167-AD.

FOR FURTHER INFORMATION CONTACT: Ivan Li, Aerospace Engineer, Airframe 
Branch, ANM-120S, FAA, Seattle Aircraft Certification Office, 1601 Lind 
Avenue, SW., Renton, Washington 98055-4056; telephone (425) 917-6437; 
fax (425) 917-6590.

SUPPLEMENTARY INFORMATION: On September 6, 2005, the FAA issued AD 
2005-19-06, amendment 39-14271 (70 FR 54474, September 15, 2005), for 
certain Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-
200C, 747-200F, 747-300, 747SR, and 747SP series airplanes; equipped 
with Pratt & Whitney JT9D-3 and -7 series engines, except JT9D-70 
engines. The AD requires repetitive detailed and ultrasonic inspections 
of the thrust links of the rear engine mounts for any crack or fracture 
and corrective actions if necessary.
    As published, the requirements of paragraph (h)(1) of the AD 
inadvertently reference doing the repetitive replacements ``* * * at 
the applicable compliance time specified in paragraph (h)(1)(i) or 
(h)(2)(ii) of this AD.'' However, there is no paragraph (h)(2)(ii) in 
the AD. We have removed reference to paragraph (h)(2)(ii) and replaced 
it with the correct reference to paragraph (h)(1)(ii).
    No other part of the regulatory information has been changed; 
therefore, the final rule is not republished in the Federal Register.
    The effective date of this AD remains September 30, 2005.


Sec.  39.13  [Corrected]

0
In the Federal Register of September 15, 2005, on page 54476, in the 
third column, paragraph (h)(1) of AD 2005-19-06 is corrected to read as 
follows:
* * * * *
    (1) Replace the cracked thrust link with a new or overhauled thrust 
link in accordance with Part 2 of the service bulletin; except as 
provided by paragraph (i) of this AD. Repeat the replacement at the 
applicable compliance time specified in paragraph (h)(1)(i) or 
(h)(1)(ii) of this AD.
* * * * *

    Issued in Renton, Washington, on September 26, 2005.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 05-19564 Filed 9-29-05; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:51:43.052911+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
83629dbab4a93709f2fc97350e3e74843b9a76fdf38be16e98864102efa35215
Text SHA-256
dae1eac1cb7ac848e06d956a810fee754cb2a69b3e25943dd8db4f587cd2c696

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.