Airworthiness Directives; Airbus Model A330, A340-200, and A340-300 Series Airplanes

[Federal Register Volume 70, Number 47 (Friday, March 11, 2005)]
[Rules and Regulations]
[Page 12119]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-4824]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. 2003-NM-256-AD; Amendment 39-13968; AD 2005-03-12]
RIN 2120-AA64


Airworthiness Directives; Airbus Model A330, A340-200, and A340-
300 Series Airplanes

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: This document corrects a typographical error that appeared in 
airworthiness directive (AD) 2005-03-12 that was published in the 
Federal Register on February 14, 2005 (70 FR 7386). The typographical 
error resulted in an incorrect AD number. This AD is applicable to 
certain Airbus Model A330, A340-200, and A340-300 series airplanes. 
This AD requires initial and repetitive inspections of certain frame 
stiffeners to detect cracking and replacement of any cracked stiffener 
with a new, reinforced stiffener. Replacement of the stiffener 
constitutes terminating action for certain inspections. This AD also 
requires a one-time inspection of any new, reinforced stiffener; and 
repair or replacement of the new, reinforced stiffener if any cracking 
is found during the one-time inspection. This AD also provides for an 
optional terminating action for certain requirements of this AD.

DATES: Effective March 21, 2005.

FOR FURTHER INFORMATION CONTACT: Tim Backman, Aerospace Engineer, 
International Branch, ANM-116, FAA, Transport Airplane Directorate, 
1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 
227-2797; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION: Airworthiness Directive (AD) 2005-03-12, 
amendment 39-13968, applicable to certain Airbus Model A330, A340-200, 
and A340-300 series airplanes, was published in the Federal Register on 
February 14, 2005 (70 FR 7386). That AD requires initial and repetitive 
inspections of certain frame stiffeners to detect cracking and 
replacement of any cracked stiffener with a new, reinforced stiffener. 
Replacement of the stiffener constitutes terminating action for certain 
inspections. That AD also requires a one-time inspection of any new, 
reinforced stiffener; and repair or replacement of the new, reinforced 
stiffener if any cracking is found during the one-time inspection. That 
AD also provides for an optional terminating action for certain 
requirements of that AD.
    As published, that final rule incorrectly specified the AD number 
in a single location in the AD as ``2005-NM-03-12'' instead of ``2005-
03-12.''
    Since no other part of the regulatory information has been changed, 
the final rule is not being republished in the Federal Register.
    The effective date of this AD remains March 21, 2005.


Sec.  39.13  [Corrected]

0
In the Federal Register of February 14, 2005, on page 7388, in the 
first column, paragraph 2. of PART 39--AIRWORTHINESS DIRECTIVES is 
corrected to read as follows:
* * * * *
2005-03-12 Airbus: Amendment 39-13968. Docket 2003-NM-256-AD.
* * * * *

    Issued in Renton, Washington, on February 28, 2005.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 05-4824 Filed 3-10-05; 8:45 am]
BILLING CODE 4910-13-P

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:58:17.168326+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256

7b7e46576c8756f7da7c009f40fe54043e287a149ed4a12b0a6dcb5d0dbd65d1

Text SHA-256

30bf8d27734e443c4c54016106766d74a1183c6771a31a7a3fa5a003135ba1ce