Back to publication catalog

Published 2005-05-12 · Federal Register document 05-9063

Airworthiness Directives; Airbus Model A310 Series Airplanes

Publication summary

The FAA is adopting a new airworthiness directive (AD) for all Airbus Model A310 series airplanes. This AD requires measuring the clearance between the compensator and the guide assembly of probe no. 1 on the outboard fuel tanks, and performing corrective actions if necessary. This AD is prompted by the results of fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent interference between the compensator and the guide assembly of probe no. 1, which could create an ignition source that could result in a fire or explosion.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:17.300228+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2005-5d43d153038ee1c1
Source row
results[186]
Raw source SHA-256
5d43d153038ee1c1c214f5c3688e38e25e37b832227fe65d52f7420a65ee20f2

Final-rule publication

Recorded publication clauses

AD identifier printed in this edition
2005-10-01
Effective date printed in this edition
2005-06-16
Read 10 complete recorded clauses
Effective Date
Effective Date

    (a) This AD becomes effective June 16, 2005.

Exact source excerpt. Text positions 6856–6922, end exclusive, in the original decoded publication. SHA-256: dfd6ddbfe6cf0ab2b8d045e09ca3913defd08938ae24facefa2d74a62752b78c

Affected ADs
Affected ADs

    (b) None.

Exact source excerpt. Text positions 6922–6951, end exclusive, in the original decoded publication. SHA-256: 027fbc44617399472b6ac4741da3aee18448654374228bcf4fe3f01df6b1539b

Applicability wording · Applicability
Applicability

    (c) This AD applies to all Airbus Model 310 series airplanes, 
certificated in any category.

Exact source excerpt. Text positions 6951–7064, end exclusive, in the original decoded publication. SHA-256: 01fb2761f7f8b0bf28ffd4f86f0de0f52b43e9ff5a8ae816d44d1e7df752629b

Unsafe Condition
Unsafe Condition

    (d) This AD was prompted by the results of fuel system reviews 
conducted by the manufacturer. We are issuing this AD to prevent 
interference between the compensator and the guide assembly of probe 
no. 1, which could create an ignition source that could result in a 
fire or explosion.

Exact source excerpt. Text positions 7064–7375, end exclusive, in the original decoded publication. SHA-256: 0844f4178cf47f91c83de64a651b519a8a21aef1a01fa69dd6d1efc38ce68c37

Compliance
Compliance

    (e) You are responsible for having the actions required by this 
AD performed within the compliance times specified, unless the 
actions have already been done.

Exact source excerpt. Text positions 7375–7553, end exclusive, in the original decoded publication. SHA-256: 64a7a1579f37f56eafecd0aeb3c528e7c89f6292ed0cb53091423917642d5847

Measurement
Measurement

    (f) Within 4,000 flight hours after the effective date of this 
AD, measure the clearance between the compensator and the guide 
assembly of probe no. 1 on the left- and right-hand outboard fuel 
tanks, in accordance with the Accomplishment Instructions of Airbus 
Service Bulletin A310-28-2152, dated January 12, 2004. If the 
clearance between the compensator and the guide assembly is less 
than 3 mm, before further flight, modify the guide assembly of probe 
no. 1 to provide clearance of 3 mm or more between the compensator 
and the guide assembly, in accordance with the Accomplishment 
Instructions of the service bulletin.

Exact source excerpt. Text positions 7553–8204, end exclusive, in the original decoded publication. SHA-256: d5ffacda0c13d675f067af60218297092f1d7be041e343fb1ac57be29e912ca1

Parts Installation
Parts Installation

    (g) As of the effective date of this AD, no person may install 
probe no. 1 on the left-or right-hand outboard fuel tank unless the 
requirements of paragraph (f) of this AD have been accomplished.

[[Page 24938]]

Exact source excerpt. Text positions 8204–8443, end exclusive, in the original decoded publication. SHA-256: d9d960b5fb72a9ad505b0f221fab93abcb9bcefb2d552c46b22a6b4db17c15fb

Alternative Methods of Compliance (AMOCs)
Alternative Methods of Compliance (AMOCs)

    (h) The Manager, International Branch, ANM-116, Transport 
Airplane Directorate, FAA, has the authority to approve AMOCs for 
this AD, if requested in accordance with the procedures found in 14 
CFR 39.19.

Exact source excerpt. Text positions 8443–8697, end exclusive, in the original decoded publication. SHA-256: 4bc1088c20730f432a45d00a43660f1181d3f7e73b01573d171d396ec663d18f

Related Information
Related Information

    (i) French airworthiness directive F-2004-125, dated July 21, 
2004, also addresses the subject of this AD.

Exact source excerpt. Text positions 8697–8831, end exclusive, in the original decoded publication. SHA-256: a84bc1aade728886b261f1786c3f67c1d53d1f3c1a206b9456aabcaa45955849

Material Incorporated by Reference
Material Incorporated by Reference

    (j) You must use Airbus Service Bulletin A310-28-2152, dated 
January 12, 2004, to perform the actions that are required by this 
AD, unless the AD specifies otherwise. The Director of the Federal 
Register approves the incorporation by reference of this document in 
accordance with 5 U.S.C. 552(a) and 1 CFR part 51. To get copies of 
the service information, contact Airbus, 1 Rond Point Maurice 
Bellonte, 31707 Blagnac Cedex, France. To view the AD docket, go to 
the Docket Management Facility, U.S. Department of Transportation, 
400 Seventh Street SW., room PL-401, Nassif Building, Washington, 
DC. To review copies of the service information, contact the 
National Archives and Records Administration (NARA). For information 
on the availability of this material at the NARA, call (202) 741-
6030, or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html html.

Exact source excerpt. Text positions 8831–9782, end exclusive, in the original decoded publication. SHA-256: a7bee1f6a4ee97edaf633de232bd9a4040a8f4598361d033daeb79f59cbb0090

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2005-10-01 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: c1824f064b450d1be642baa5e16a04aa68a6a7f2737d8319050852072fde7624. Source manifest: cd4d2d29d4d5dfbdd01bf9ca51ae7ee668ea3c681b64b24aafc40c7ca578b71d.

Official source · 2005-05-12

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 70, Number 91 (Thursday, May 12, 2005)]
[Rules and Regulations]
[Pages 24936-24938]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-9063]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2005-20379; Directorate Identifier 2004-NM-174-AD; 
Amendment 39-14078; AD 2005-10-01]
RIN 2120-AA64


Airworthiness Directives; Airbus Model A310 Series Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all 
Airbus Model A310 series airplanes. This AD requires measuring the 
clearance between the compensator and the guide assembly of probe no. 1 
on the outboard fuel tanks, and performing corrective actions if 
necessary. This AD is prompted by the results of fuel system reviews 
conducted by the manufacturer. We are issuing this AD to prevent 
interference between the compensator and the guide assembly of probe 
no. 1, which could create an ignition source that could result in a 
fire or explosion.

DATES: This AD becomes effective June 16, 2005.
    The incorporation by reference of a certain publication listed in 
the AD is approved by the Director of the Federal Register as of June 
16, 2005.

ADDRESSES: For service information identified in this AD, contact 
Airbus, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France.
    Docket: The AD docket contains the proposed AD, comments, and any 
final disposition. You can examine the AD docket on the Internet at 
http://dms.dot.gov, or in person at the Docket Management Facility 
office between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The

[[Page 24937]]

Docket Management Facility office (telephone (800) 647-5227) is located 
on the plaza level of the Nassif Building at the U.S. Department of 
Transportation, 400 Seventh Street, SW., room PL-401, Washington, DC. 
This docket number is FAA-2005-20379; the directorate identifier for 
this docket is 2004-NM-174-AD.

FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, 
International Branch, ANM-116, FAA, Transport Airplane Directorate, 
1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 
227-2125; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION: The FAA proposed to amend 14 CFR part 39 
with an AD for all Airbus Model A310 series airplanes. That action, 
published in the Federal Register on February 15, 2005 (70 FR 7700), 
proposed to require measuring the clearance between the compensator and 
the guide assembly of probe no. 1 on the outboard fuel tanks, and 
performing corrective actions if necessary.

Comments

    We provided the public the opportunity to participate in the 
development of this AD. No comments have been submitted on the proposed 
AD or on the determination of the cost to the public.

Conclusion

    We have carefully reviewed the available data and determined that 
air safety and the public interest require adopting the AD as proposed.

Costs of Compliance

    The following table provides the estimated costs for U.S. operators 
to comply with this AD.

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                                         Number of
                                              Average                        Cost per      U.S.-
            Action              Work hours   labor rate        Parts         airplane    registered   Fleet cost
                                              per hour                                   airplanes
----------------------------------------------------------------------------------------------------------------
Inspection...................            2          $65  None............         $130           59       $7,670
----------------------------------------------------------------------------------------------------------------

Authority for this Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, Section 106, describes the 
authority of the FAA Administrator. Subtitle VII, Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701, ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We have determined that this AD will not have federalism 
implications under Executive Order 13132. This AD will not have a 
substantial direct effect on the States, on the relationship between 
the national government and the States, or on the distribution of power 
and responsibilities among the various levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866;
    (2) Is not a ``significant rule'' under DOT Regulatory Policies and 
Procedures (44 FR 11034, February 26, 1979); and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.
    We prepared a regulatory evaluation of the estimated costs to 
comply with this AD. See the ADDRESSES section for a location to 
examine the regulatory evaluation.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

0
Accordingly, under the authority delegated to me by the Administrator, 
the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

2005-10-01 Airbus: Amendment 39-14078. Docket No. FAA-2005-20379; 
Directorate Identifier 2004-NM-174-AD.

Effective Date

    (a) This AD becomes effective June 16, 2005.

Affected ADs

    (b) None.

Applicability

    (c) This AD applies to all Airbus Model 310 series airplanes, 
certificated in any category.

Unsafe Condition

    (d) This AD was prompted by the results of fuel system reviews 
conducted by the manufacturer. We are issuing this AD to prevent 
interference between the compensator and the guide assembly of probe 
no. 1, which could create an ignition source that could result in a 
fire or explosion.

Compliance

    (e) You are responsible for having the actions required by this 
AD performed within the compliance times specified, unless the 
actions have already been done.

Measurement

    (f) Within 4,000 flight hours after the effective date of this 
AD, measure the clearance between the compensator and the guide 
assembly of probe no. 1 on the left- and right-hand outboard fuel 
tanks, in accordance with the Accomplishment Instructions of Airbus 
Service Bulletin A310-28-2152, dated January 12, 2004. If the 
clearance between the compensator and the guide assembly is less 
than 3 mm, before further flight, modify the guide assembly of probe 
no. 1 to provide clearance of 3 mm or more between the compensator 
and the guide assembly, in accordance with the Accomplishment 
Instructions of the service bulletin.

Parts Installation

    (g) As of the effective date of this AD, no person may install 
probe no. 1 on the left-or right-hand outboard fuel tank unless the 
requirements of paragraph (f) of this AD have been accomplished.

[[Page 24938]]

Alternative Methods of Compliance (AMOCs)

    (h) The Manager, International Branch, ANM-116, Transport 
Airplane Directorate, FAA, has the authority to approve AMOCs for 
this AD, if requested in accordance with the procedures found in 14 
CFR 39.19.

Related Information

    (i) French airworthiness directive F-2004-125, dated July 21, 
2004, also addresses the subject of this AD.

Material Incorporated by Reference

    (j) You must use Airbus Service Bulletin A310-28-2152, dated 
January 12, 2004, to perform the actions that are required by this 
AD, unless the AD specifies otherwise. The Director of the Federal 
Register approves the incorporation by reference of this document in 
accordance with 5 U.S.C. 552(a) and 1 CFR part 51. To get copies of 
the service information, contact Airbus, 1 Rond Point Maurice 
Bellonte, 31707 Blagnac Cedex, France. To view the AD docket, go to 
the Docket Management Facility, U.S. Department of Transportation, 
400 Seventh Street SW., room PL-401, Nassif Building, Washington, 
DC. To review copies of the service information, contact the 
National Archives and Records Administration (NARA). For information 
on the availability of this material at the NARA, call (202) 741-
6030, or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html html.

    Issued in Renton, Washington, on April 29, 2005.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 05-9063 Filed 5-11-05; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:55:31.601038+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
3f80d50c90a48fbb77752db28a681ad64f7799ed2aa00fb90569b96cbfd489d2
Text SHA-256
c1824f064b450d1be642baa5e16a04aa68a6a7f2737d8319050852072fde7624

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.