Back to publication catalog

Published 2010-09-08 · Federal Register document 2010-22147

Airworthiness Directives; Bombardier-Rotax GmbH 912 F Series and 912 S Series Reciprocating Engines

Publication summary

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:33.146842+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2010-a7267cd3a71dbd26
Source row
results[286]
Raw source SHA-256
a7267cd3a71dbd2645583c8a673df65e4a7fa9360a96e3be0de5b81f9d68c9a0

Final-rule publication

Recorded publication clauses

AD identifier printed in this edition
2010-18-14
Effective date printed in this edition
2010-10-13
Read 9 complete recorded clauses
Effective Date
Effective Date

    (a) This airworthiness directive (AD) becomes effective October 
13, 2010.

Exact source excerpt. Text positions 6568–6664, end exclusive, in the original decoded publication. SHA-256: 59033f1f023acc116c0502faffc6ef4bada2c722f1b27184110f3c69f47804ca

Affected ADs
Affected ADs

    (b) None.

Exact source excerpt. Text positions 6664–6693, end exclusive, in the original decoded publication. SHA-256: 027fbc44617399472b6ac4741da3aee18448654374228bcf4fe3f01df6b1539b

Applicability wording · Applicability
Applicability

    (c) This AD applies to Bombardier-Rotax 912 F series and 912 S 
series reciprocating engines with fuel pumps, part numbers (P/Ns) 
892230, 892232, 892540 (standard version) or P/Ns 892235, 892236, 
892545 (version including flexible fuel line), installed. These 
engines are installed on, but not limited to, Diamond (formerly 
HOAC) HK-36R Super Dimona, Aeromot AMT-200S Super Ximango; Diamond 
DA20-A1 Katana; Scheibe SF 25C; Iniziative Industriali Italiane 
S.p.A. Sky Arrow 650 TC, and 650 TCN airplanes.

Exact source excerpt. Text positions 6693–7222, end exclusive, in the original decoded publication. SHA-256: 36eb7c5e3a4feba29f5a1cde0c47c522c07d7dbdd75b95834a6862f53f9d95dc

Reason
Reason

    (d) This AD results from mandatory continuing airworthiness 
information (MCAI) issued by an aviation authority of another 
country to identify and correct an unsafe condition on an aviation 
product. The MCAI describes the unsafe condition as:

    Due to high fuel pressure, caused by exceeding pressure in front 
of the mechanical fuel pump (e.g. due to an electrical fuel pump), 
in limited cases a deviation in the fuel supply could occur. This 
can result in exceeding of the fuel pressure and might cause engine 
malfunction and/or massive fuel leakage.


[[Page 54464]]


We are issuing this AD to prevent the pump from exceeding the fuel 
pressure, which could result in engine malfunction or a massive fuel 
leak. These conditions could cause loss of control of the airplane 
or a fire.

Exact source excerpt. Text positions 7222–8032, end exclusive, in the original decoded publication. SHA-256: de7e770342c3e2da670fb217ed79f59e4f873acff62594f1158dccb167190162

Actions and Compliance
Actions and Compliance

    (e) Unless already done, do the following actions.
    (1) At the next maintenance, or within the next 25 hours of 
engine operation, whichever occurs first, after the effective date 
of this AD, remove affected fuel pumps, P/Ns 892230, 892232, 892235, 
892236, 892540, or 892545.
    (2) After the effective date of this AD, do not install fuel 
pump, P/Ns 892230, 892232, 892235, 892236, 892540, or 892545, on any 
engine.

Exact source excerpt. Text positions 8032–8486, end exclusive, in the original decoded publication. SHA-256: d0b93ec0aedf6ea18fe4c583cef662c9ae644471248ef4a17befe362592c4e37

FAA AD Differences
FAA AD Differences

    (f) This AD differs from the MCAI and/or service information as 
follows: The MCAI requires replacing an affected fuel pump with fuel 
pump, P/N 892542 or 892546. This AD requires replacement of an 
affected fuel pump with a fuel pump eligible for installation on the 
airplane.

Exact source excerpt. Text positions 8486–8790, end exclusive, in the original decoded publication. SHA-256: fbd6d78aee67ecbecbd07a1d292d44fa8513a460f4702ed897f4a2a1dca8a2cb

Other FAA AD Provisions
Other FAA AD Provisions

    (g) Alternative Methods of Compliance (AMOCs): The Manager, 
Engine Certification Office, FAA, has the authority to approve AMOCs 
for this AD, if requested using the procedures found in 14 CFR 
39.19.

Exact source excerpt. Text positions 8790–9022, end exclusive, in the original decoded publication. SHA-256: 0e5d80bfc9b09cb25385eee4f48dda380f43fade07d76f5b3b84f87466d8e5d7

Related Information
Related Information

    (h) Refer to MCAI AD 2007-0060R1-E, dated April 20, 2007, and 
Rotax Aircraft Engines Service Bulletin SB-912-053, dated April 13, 
2007, for related information. Contact BRP-Rotax GmbH & Co. KG, 
Welser Strasse 32, A-4623 Gunskirchen, Austria, or go to: 
http:[sol][sol]www.rotax-aircraft-engines.com[sol], for a copy of 
this service information.
    (i) Contact Alan Strom, Aerospace Engineer, Engine Certification 
Office, FAA, Engine and Propeller Directorate, 12 New England 
Executive Park, Burlington, MA 01803; e-mail: [email protected]; 
telephone (781) 238-7143; fax (781) 238-7199, for more information 
about this AD.

Exact source excerpt. Text positions 9022–9679, end exclusive, in the original decoded publication. SHA-256: e81b66c1593b98ec1a404964e88b9cc06b3ab050b805fc27ee1059ef305775a4

Material Incorporated by Reference
Material Incorporated by Reference

    (j) None.

Exact source excerpt. Text positions 9679–9729, end exclusive, in the original decoded publication. SHA-256: 6733a10e217f7481488060dfb0df10f510fddf90ee9cabc132807202700da646

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2010-18-14 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 4f48d4a57a306241e3a96f63df2a620042ef2a2fe7493b742f22b043cd8ba3d5. Source manifest: f7678702a4d90c898f1d4b86c94278c5482e3dc120c358b9cba8b61949d2c335.

Official source · 2010-09-08

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 75, Number 173 (Wednesday, September 8, 2010)]
[Rules and Regulations]
[Pages 54462-54464]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-22147]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2010-0499; Directorate Identifier 2010-NE-06-AD; 
Amendment 39-16428; AD 2010-18-14]
RIN 2120-AA64


Airworthiness Directives; Bombardier-Rotax GmbH 912 F Series and 
912 S Series Reciprocating Engines

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for the 
products listed above. This AD results from mandatory continuing 
airworthiness information (MCAI) issued by an aviation authority of 
another country to identify and correct

[[Page 54463]]

an unsafe condition on an aviation product. The MCAI describes the 
unsafe condition as:

    Due to high fuel pressure, caused by exceeding pressure in front 
of the mechanical fuel pump (e.g. due to an electrical fuel pump), 
in limited cases a deviation in the fuel supply could occur. This 
can result in exceeding of the fuel pressure and might cause engine 
malfunction and/or massive fuel leakage.

We are issuing this AD to prevent the pump from exceeding the fuel 
pressure, which could result in engine malfunction or a massive fuel 
leak. These conditions could cause loss of control of the airplane or a 
fire.

DATES: This AD becomes effective October 13, 2010.

ADDRESSES: The Docket Operations office is located at Docket Management 
Facility, U.S. Department of Transportation, 1200 New Jersey Avenue, 
SE., West Building Ground Floor, Room W12-140, Washington, DC 20590-
0001.

FOR FURTHER INFORMATION CONTACT: Alan Strom, Aerospace Engineer, Engine 
Certification Office, FAA, Engine and Propeller Directorate, 12 New 
England Executive Park, Burlington, MA 01803; e-mail: 
[email protected]; telephone (781) 238-7143; fax (781) 238-7199.

SUPPLEMENTARY INFORMATION:

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 to include an AD that would apply to the specified products. 
That NPRM was published in the Federal Register on May 17, 2010 (75 FR 
27487). That NPRM proposed to correct an unsafe condition for the 
specified products. The MCAI states:

    Due to high fuel pressure, caused by exceeding pressure in front 
of the mechanical fuel pump (e.g. due to an electrical fuel pump), 
in limited cases a deviation in the fuel supply could occur. This 
can result in exceeding of the fuel pressure and might cause engine 
malfunction and/or massive fuel leakage.

Comments

    We gave the public the opportunity to participate in developing 
this AD. We received no comments on the NPRM or on the determination of 
the cost to the public.

Conclusion

    We reviewed the available data and determined that air safety and 
the public interest require adopting the AD as proposed.

Costs of Compliance

    Based on the service information, we estimate that this AD will 
affect about 50 products of U.S. registry. We also estimate that it 
will take about 0.5 work-hour per product to comply with this AD. The 
average labor rate is $85 per work-hour. Required parts will cost about 
$650 per product. Based on these figures, we estimate the cost of the 
AD on U.S. operators to be $34,625.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this AD will not have federalism implications 
under Executive Order 13132. This AD will not have a substantial direct 
effect on the States, on the relationship between the national 
government and the States, or on the distribution of power and 
responsibilities among the various levels of government.
    For the reasons discussed above, I certify this AD:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979); and
    3. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.
    We prepared a regulatory evaluation of the estimated costs to 
comply with this AD and placed it in the AD docket.

Examining the AD Docket

    You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Operations office 
between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The AD docket contains this AD, the regulatory evaluation, 
any comments received, and other information. The street address for 
the Docket Operations office (phone (800) 647-5527) is provided in the 
ADDRESSES section. Comments will be available in the AD docket shortly 
after receipt.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Safety.

Adoption of the Amendment

0
Accordingly, under the authority delegated to me by the Administrator, 
the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new AD:

2010-18-14 Bombardier-Rotax GmbH (Formerly Motorenfabrik): Amendment 
39-16428. Docket No. FAA-2010-0499; Directorate Identifier 2010-NE-
06-AD.

Effective Date

    (a) This airworthiness directive (AD) becomes effective October 
13, 2010.

Affected ADs

    (b) None.

Applicability

    (c) This AD applies to Bombardier-Rotax 912 F series and 912 S 
series reciprocating engines with fuel pumps, part numbers (P/Ns) 
892230, 892232, 892540 (standard version) or P/Ns 892235, 892236, 
892545 (version including flexible fuel line), installed. These 
engines are installed on, but not limited to, Diamond (formerly 
HOAC) HK-36R Super Dimona, Aeromot AMT-200S Super Ximango; Diamond 
DA20-A1 Katana; Scheibe SF 25C; Iniziative Industriali Italiane 
S.p.A. Sky Arrow 650 TC, and 650 TCN airplanes.

Reason

    (d) This AD results from mandatory continuing airworthiness 
information (MCAI) issued by an aviation authority of another 
country to identify and correct an unsafe condition on an aviation 
product. The MCAI describes the unsafe condition as:

    Due to high fuel pressure, caused by exceeding pressure in front 
of the mechanical fuel pump (e.g. due to an electrical fuel pump), 
in limited cases a deviation in the fuel supply could occur. This 
can result in exceeding of the fuel pressure and might cause engine 
malfunction and/or massive fuel leakage.


[[Page 54464]]


We are issuing this AD to prevent the pump from exceeding the fuel 
pressure, which could result in engine malfunction or a massive fuel 
leak. These conditions could cause loss of control of the airplane 
or a fire.

Actions and Compliance

    (e) Unless already done, do the following actions.
    (1) At the next maintenance, or within the next 25 hours of 
engine operation, whichever occurs first, after the effective date 
of this AD, remove affected fuel pumps, P/Ns 892230, 892232, 892235, 
892236, 892540, or 892545.
    (2) After the effective date of this AD, do not install fuel 
pump, P/Ns 892230, 892232, 892235, 892236, 892540, or 892545, on any 
engine.

FAA AD Differences

    (f) This AD differs from the MCAI and/or service information as 
follows: The MCAI requires replacing an affected fuel pump with fuel 
pump, P/N 892542 or 892546. This AD requires replacement of an 
affected fuel pump with a fuel pump eligible for installation on the 
airplane.

Other FAA AD Provisions

    (g) Alternative Methods of Compliance (AMOCs): The Manager, 
Engine Certification Office, FAA, has the authority to approve AMOCs 
for this AD, if requested using the procedures found in 14 CFR 
39.19.

Related Information

    (h) Refer to MCAI AD 2007-0060R1-E, dated April 20, 2007, and 
Rotax Aircraft Engines Service Bulletin SB-912-053, dated April 13, 
2007, for related information. Contact BRP-Rotax GmbH & Co. KG, 
Welser Strasse 32, A-4623 Gunskirchen, Austria, or go to: 
http:[sol][sol]www.rotax-aircraft-engines.com[sol], for a copy of 
this service information.
    (i) Contact Alan Strom, Aerospace Engineer, Engine Certification 
Office, FAA, Engine and Propeller Directorate, 12 New England 
Executive Park, Burlington, MA 01803; e-mail: [email protected]; 
telephone (781) 238-7143; fax (781) 238-7199, for more information 
about this AD.

Material Incorporated by Reference

    (j) None.

    Issued in Burlington, Massachusetts, on August 27, 2010.
Thomas A. Boudreau,
Acting Manager, Engine and Propeller Directorate, Aircraft 
Certification Service.
[FR Doc. 2010-22147 Filed 9-7-10; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:13:42.263660+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
126513bb4e96d17e83cd6f61bc25e33d4c935faec94741e33a0b79ad43a8ed8f
Text SHA-256
4f48d4a57a306241e3a96f63df2a620042ef2a2fe7493b742f22b043cd8ba3d5

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.