Published 2011-03-18 · Federal Register document 2011-6300
Airworthiness Directives; General Electric Company CF6-45 and CF6-50 Series Turbofan Engines
Publication summary
We are superseding an existing airworthiness directive (AD) for General Electric Company (GE) CF6-45 and CF6-50 series turbofan engines. That AD currently requires replacing certain forward and aft centerbodies of the long fixed core exhaust nozzle (LFCEN) assembly. This AD adds certain new forward and aft centerbody part numbers (P/Ns) to the list requiring replacement. This AD was prompted by the discovery of more LFCEN forward and aft centerbody P/Ns that require replacement. We are issuing this AD to prevent the forward and aft centerbody of the LFCEN assembly from separating from the engine, causing damage to the engine, and damage to the airplane.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:36.067984+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2011-e3661fa6ab35b428
- Source row
- results[80]
- Raw source SHA-256
- e3661fa6ab35b428e6e5ee3716d50c22e985c092328ad8ce2f0f440b962ae0cd
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 2011-07-01
- Effective date printed in this edition
- 2011-04-22
Read 7 complete recorded clauses
Effective Date
Effective Date
(a) This airworthiness directive (AD) is effective April 22,
2011.
Exact source excerpt. Text positions 6993–7082, end exclusive, in the original decoded publication. SHA-256: a074ea78bed65072939aff615688c67c81636eee6788afe465bca251021f2d39
Affected ADs
Affected ADs
(b) This AD supersedes AD 2009-04-17, Amendment 39-15823.
Exact source excerpt. Text positions 7082–7159, end exclusive, in the original decoded publication. SHA-256: ae5fb511b59141652e14414dd6fd58f393d0361410e7236495156b1e921749d4
Applicability wording · Applicability
Applicability
(c) This AD applies to the following engines with a long fixed
core exhaust nozzle (LFCEN) assembly forward centerbody, part number
(P/N) 1313M55G01 or G02, P/N 9076M28G05, G06, G08, G09, or G10, P/N
9076M82G01 or G03, and aft centerbody P/N 1313M56G01, or P/N
9076M46G02, G04, or G05, installed in:
(1) General Electric Company (GE) CF6-45A, CF6-45A2, CF6-50A,
CF6-50C, CF6-50CA, CF6-50C1, CF6-50C2, CF6-50C2B, CF6-50C2D, CF6-
50E, CF6-50E1, CF6-50E2, and CF6-50E2B turbofan engines, including
engines marked on the engine data plate as CF6-50C2-F and CF6-50C2-
R.
(2) These engines are installed on, but not limited to, Airbus
A300 series, Boeing 747-200B, 747-200C, 747-200F, 747-300 and 747SR,
McDonnell Douglas DC-10-15, DC-10-30, DC-10-30F (KC-10A, KDC-10),
and MD-10-30F airplanes.
Exact source excerpt. Text positions 7159–7985, end exclusive, in the original decoded publication. SHA-256: faa3922d7caf5dcc094f93d1a6282605133d9556b0a37a92de2d27e2bbe607f3
Unsafe Condition
Unsafe Condition
(d) This AD was prompted by the discovery of more LFCEN forward
and aft centerbody P/Ns that require replacement. We are issuing
this AD to prevent the forward and aft centerbody of the LFCEN
assembly from separating from the engine, causing damage to the
engine, and damage to the airplane.
Exact source excerpt. Text positions 7985–8304, end exclusive, in the original decoded publication. SHA-256: ae499e093391402f3ffcf5ea3611b9af3c6fae912b07692b799bc4b92d2201f9
Compliance
Compliance
(e) Comply with this AD within the compliance times specified,
unless already done.
(1) Within 18 months after the effective date of this AD,
replace forward centerbody, P/N 1313M55G01 and G02, P/N 9076M28G05,
G06, G08, G09, and G10, P/N 9076M82G01 and G03, and aft centerbody
P/N 1313M56G01, P/N 9076M46G02, G04, and G05 with a forward and aft
centerbody that has been modified using the Accomplishment
Instructions, Section 3, of GE Service Bulletin (SB) No. CF6-50 S/B
78-0244, Revision 1, dated March 13, 2008, CF6-50 S/B 78-0244, dated
July 30, 2007, or CF6-50 S/B 78-0242, dated September 26, 2005.
Centerbody Installation Prohibition
(2) After 18 months from the effective date of this AD, do not
install any engine with forward centerbody, P/N 1313M55G01 or G02,
P/N 9076M28G05, G06, G08, G09, or G10, P/N 9076M82G01 or G03, or aft
centerbody P/N 1313M56G01, P/N 9076M46G02, G04, or G05 on any
airplane.
Exact source excerpt. Text positions 8304–9255, end exclusive, in the original decoded publication. SHA-256: 51dfc141f76e015b159d5a6c5c75783712fd462d16ac8d37254266e59107cb8c
Alternative Methods of Compliance (AMOCs)
Alternative Methods of Compliance (AMOCs)
(f) The Manager, Engine Certification Office, FAA, may approve
AMOCs for this AD, if requested using the procedures found in 14 CFR
39.19.
Exact source excerpt. Text positions 9255–9444, end exclusive, in the original decoded publication. SHA-256: 1eb3498ceb46c9c6c121772bff414982ff2dfde96213222148cec400b5c67a96
Related Information
Related Information
(g) For more information about this AD, contact Tomasz Rakowski,
Aerospace Engineer, Engine Certification Office, FAA, Engine &
Propeller Directorate; phone: 781-238-7735; fax: 781-238-7199; e-
mail: [email protected].
(h) For service information identified in this AD, contact GE-
Aviation M/D Rm. 285, One Neumann Way, Cincinnati, OH 45215,
telephone 513-552-3272; e-mail: [email protected]. You may review
copies of the referenced service information at the FAA, Engine &
Propeller Directorate, 12 New England Executive Park, Burlington,
MA. For information on the availability of this material at the FAA,
call 781-238-7125.
Exact source excerpt. Text positions 9444–10109, end exclusive, in the original decoded publication. SHA-256: 930f142fd4476c984ef7ffe00b9c0df56f1844961a926c01cb6afb981abfd990
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2011-07-01 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 776641201dd86cacbcfd7fb1407f4d334bb59ce82fe2afd40f563966461932ab. Source manifest: 1d0ff3f7db80edacd5b36dafab9bb2ce5761dd2e20b23b711ca63bab78a0b997.
Official source · 2011-03-18
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 76, Number 53 (Friday, March 18, 2011)]
[Rules and Regulations]
[Pages 14796-14797]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2011-6300]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2006-24145; Directorate Identifier 2006-NE-06-AD;
Amendment 39-16638; AD 2011-07-01]
RIN 2120-AA64
Airworthiness Directives; General Electric Company CF6-45 and
CF6-50 Series Turbofan Engines
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: We are superseding an existing airworthiness directive (AD)
for General Electric Company (GE) CF6-45 and CF6-50 series turbofan
engines. That AD currently requires replacing certain forward and aft
centerbodies of the long fixed core exhaust nozzle (LFCEN) assembly.
This AD adds certain new forward and aft centerbody part numbers (P/Ns)
to the list requiring replacement. This AD was prompted by the
discovery of more LFCEN forward and aft centerbody P/Ns that require
replacement. We are issuing this AD to prevent the forward and aft
centerbody of the LFCEN assembly from separating from the engine,
causing damage to the engine, and damage to the airplane.
DATES: This AD is effective April 22, 2011.
ADDRESSES: For service information identified in this AD, contact GE-
Aviation M/D Rm. 285, One Neumann Way, Cincinnati, OH 45215, telephone
513-552-3272; e-mail: [email protected]. You may review copies of the
referenced service information at the FAA, Engine & Propeller
Directorate, 12 New England Executive Park, Burlington, MA. For
information on the availability of this material at the FAA, call 781-
238-7125.
Examining the AD Docket
You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Management Facility
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The AD docket contains this AD, the regulatory evaluation,
any comments received, and other information. The address for the
Docket Office (phone: 800-647-5527) is Document Management Facility,
U.S. Department of Transportation, Docket Operations, M-30, West
Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE.,
Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Tomasz Rakowski, Aerospace Engineer,
Engine Certification Office, FAA, Engine & Propeller Directorate;
phone: 781-238-7735; fax: 781-238-7199; e-mail:
[email protected].
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR
part 39 to supersede airworthiness directive (AD) 2009-04-17, Amendment
39-15823 (74 FR 8735, February 26, 2009). That AD applies to the
specified products. The NPRM published in the Federal Register on
January 4, 2011 (76 FR 292). That NPRM proposed to add forward
centerbody P/Ns 9076M28G05, G06, and G08, P/Ns 9076M82G01 and G03, and
aft centerbody P/Ns 9076M46G02 and G04 to the P/Ns in AD 2009-04-17
that are required to be removed from service.
Comments
We gave the public the opportunity to participate in developing
this AD. The following presents the comment received on the proposal
and the FAA's response to the comment.
Request
One commenter, Boeing Commercial Airplanes, pointed out that the
McDonnell Douglas airplanes affected by the proposed AD should be
listed out as DC-10-15, DC-10-30, DC-10-30F, KC-10, KDC-10, and MD-10-
30F. The commenter stated that the proposed AD only listed these
airplanes as a series.
We agree. We revised this AD as requested, except we listed KC-10
as KC-10A as it appears in the Type Certificate Data Sheet.
Conclusion
We reviewed the relevant data, considered the comment received, and
determined that air safety and the public interest require adopting the
AD with the change described previously.
Costs of Compliance
We estimate that this AD will affect 383 GE CF6-45 and CF6-50
series turbofan engines installed on airplanes of U.S. registry. We
also estimate that it will take about 44 work hours per engine to
perform the actions required by this AD, and that the average labor
rate is $85 per work-hour. Required parts will cost about $11,000 per
engine. Based on these figures, we estimate the total cost of this AD
to U.S. operators to be $5,645,420.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, Section 106, describes the
authority of the FAA Administrator. Subtitle VII, Aviation Programs,
describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701, ``General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on
[[Page 14797]]
products identified in this rulemaking action.
Regulatory Findings
We have determined that this AD will not have federalism
implications under Executive Order 13132. This AD will not have a
substantial direct effect on the States, on the relationship between
the national government and the States, or on the distribution of power
and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979),
(3) Will not affect intrastate aviation in Alaska, and
(4) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by removing airworthiness directive (AD)
2009-04-17, Amendment 39-15823 (74 FR 8735; February 26, 2009), and
adding the following new AD:
2011-07-01 General Electric Company: Amendment 39-16638 ; Docket No.
FAA-2006-24145; Directorate Identifier 2006-NE-06-AD.
Effective Date
(a) This airworthiness directive (AD) is effective April 22,
2011.
Affected ADs
(b) This AD supersedes AD 2009-04-17, Amendment 39-15823.
Applicability
(c) This AD applies to the following engines with a long fixed
core exhaust nozzle (LFCEN) assembly forward centerbody, part number
(P/N) 1313M55G01 or G02, P/N 9076M28G05, G06, G08, G09, or G10, P/N
9076M82G01 or G03, and aft centerbody P/N 1313M56G01, or P/N
9076M46G02, G04, or G05, installed in:
(1) General Electric Company (GE) CF6-45A, CF6-45A2, CF6-50A,
CF6-50C, CF6-50CA, CF6-50C1, CF6-50C2, CF6-50C2B, CF6-50C2D, CF6-
50E, CF6-50E1, CF6-50E2, and CF6-50E2B turbofan engines, including
engines marked on the engine data plate as CF6-50C2-F and CF6-50C2-
R.
(2) These engines are installed on, but not limited to, Airbus
A300 series, Boeing 747-200B, 747-200C, 747-200F, 747-300 and 747SR,
McDonnell Douglas DC-10-15, DC-10-30, DC-10-30F (KC-10A, KDC-10),
and MD-10-30F airplanes.
Unsafe Condition
(d) This AD was prompted by the discovery of more LFCEN forward
and aft centerbody P/Ns that require replacement. We are issuing
this AD to prevent the forward and aft centerbody of the LFCEN
assembly from separating from the engine, causing damage to the
engine, and damage to the airplane.
Compliance
(e) Comply with this AD within the compliance times specified,
unless already done.
(1) Within 18 months after the effective date of this AD,
replace forward centerbody, P/N 1313M55G01 and G02, P/N 9076M28G05,
G06, G08, G09, and G10, P/N 9076M82G01 and G03, and aft centerbody
P/N 1313M56G01, P/N 9076M46G02, G04, and G05 with a forward and aft
centerbody that has been modified using the Accomplishment
Instructions, Section 3, of GE Service Bulletin (SB) No. CF6-50 S/B
78-0244, Revision 1, dated March 13, 2008, CF6-50 S/B 78-0244, dated
July 30, 2007, or CF6-50 S/B 78-0242, dated September 26, 2005.
Centerbody Installation Prohibition
(2) After 18 months from the effective date of this AD, do not
install any engine with forward centerbody, P/N 1313M55G01 or G02,
P/N 9076M28G05, G06, G08, G09, or G10, P/N 9076M82G01 or G03, or aft
centerbody P/N 1313M56G01, P/N 9076M46G02, G04, or G05 on any
airplane.
Alternative Methods of Compliance (AMOCs)
(f) The Manager, Engine Certification Office, FAA, may approve
AMOCs for this AD, if requested using the procedures found in 14 CFR
39.19.
Related Information
(g) For more information about this AD, contact Tomasz Rakowski,
Aerospace Engineer, Engine Certification Office, FAA, Engine &
Propeller Directorate; phone: 781-238-7735; fax: 781-238-7199; e-
mail: [email protected].
(h) For service information identified in this AD, contact GE-
Aviation M/D Rm. 285, One Neumann Way, Cincinnati, OH 45215,
telephone 513-552-3272; e-mail: [email protected]. You may review
copies of the referenced service information at the FAA, Engine &
Propeller Directorate, 12 New England Executive Park, Burlington,
MA. For information on the availability of this material at the FAA,
call 781-238-7125.
Issued in Burlington, Massachusetts, on March 14, 2011.
Peter A. White,
Acting Manager, Engine & Propeller Directorate, Aircraft Certification
Service.
[FR Doc. 2011-6300 Filed 3-17-11; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:10:10.637069+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- f95675dd6f35b6ce527c8174943c6fb8bfede2b4e7abed54b56230c97e0b3622
- Text SHA-256
- 776641201dd86cacbcfd7fb1407f4d334bb59ce82fe2afd40f563966461932ab
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.