Back to publication catalog

Published 2012-01-23 · Federal Register document 2012-1133

Airworthiness Directives; BRP-POWERTRAIN GMBH & CO KG Rotax Reciprocating Engines

Publication summary

We are adopting a new airworthiness directive (AD) for BRP-- POWERTRAIN GMBH & CO KG Rotax 914 F2, 914 F3, and 914 F4 reciprocating engines. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as isolated manufacturing deviations reportedly found on the threads of a certain batch of fuel pressure regulators, part number (P/N) 887130, installed on Rotax 914 F series engines, which could result in fuel leakage during engine operation. We are issuing this AD to prevent fuel leaks, which could result in an in-flight fire and damage to the aircraft.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:39.502075+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2012-08bffa249ae9a205
Source row
results[13]
Raw source SHA-256
08bffa249ae9a2053bbfc0d74663d089914e83fb91f9bc4c8409ea28239f6875

Final-rule publication

Recorded publication clauses

AD identifier printed in this edition
2012-01-07
Effective date printed in this edition
2012-02-27
Read 8 complete recorded clauses
Effective Date
(a) Effective Date

    This airworthiness directive (AD) becomes effective February 27, 
2012.

Exact source excerpt. Text positions 6852–6949, end exclusive, in the original decoded publication. SHA-256: 4ea548286532bbe28ca6fe236fe408a72df1c0429268f7403de6e45a25440068

Affected ADs
(b) Affected ADs

    None.

Exact source excerpt. Text positions 6949–6978, end exclusive, in the original decoded publication. SHA-256: 871a4afc60ceeae06e8010585055188633d616078500c45937092bfe892239c0

Applicability wording · Applicability
(c) Applicability

    This AD applies to BRP--POWERTRAIN GMBH & CO KG Rotax 914 F2, 
914 F3, and 914 F4 reciprocating engines with certain fuel pressure 
regulators, part number (P/N) 887130 installed.

Exact source excerpt. Text positions 6978–7182, end exclusive, in the original decoded publication. SHA-256: 841250ffe565ba9d62940b13983afb5e1c270bd6ce6a67cb09658d0377bda4ee

Reason
(d) Reason

    This AD was prompted by isolated manufacturing deviations 
reportedly found on the threads of a certain batch of fuel pressure 
regulators, P/N 887130, installed on Rotax 914 F series engines, 
which could result in fuel leakage during engine operation. We are 
issuing this AD to prevent fuel leaks, which could result in an in-
flight fire and damage to the aircraft.

Exact source excerpt. Text positions 7182–7569, end exclusive, in the original decoded publication. SHA-256: b59ef410a65531f09e676581e045f4f732da6f9b0699b0b16a633366ce27dc67

Actions and Compliance
(e) Actions and Compliance

    Within 100 flight hours (FHs) after the effective date of this 
AD, replace fuel pressure regulators listed in Table 1 of this AD 
with a fuel pressure regulator that is not listed in Table 1 of this 
AD, and is eligible for installation.
    (1) After the effective date of this AD, do not install any fuel 
pressure regulator P/N 887130 onto any engine if the fuel pressure 
regulator has a serial number (S/N) listed in Table 1 of this AD.
    (2) After the effective date of this AD, do not install any 
Rotax 914 F series engine on any airplane if it has installed in it 
a fuel pressure regulator P/N 887130 with a S/N listed in Table 1 of 
this AD.

     Table 1--S/Ns of Affected Fuel Pressure Regulators, P/N 887130
------------------------------------------------------------------------
 
---------------------------------------------------------------------------
100200 through 100246 inclusive.
100248 through 100280 inclusive.
100282 through 100293 inclusive.
100295 through 100314 inclusive.
100316 and 100317.
100319 through 100326 inclusive.
100330.
100332 and 100333.
100338 through 100340 inclusive.
100342 through 100345 inclusive.
100348.
100350 through 100355 inclusive.
100357 through 100363 inclusive.
100365 through 100368 inclusive.
100371 and 100372.
100374 through 100376 inclusive.
100379 and 100380.
100395 and 100396.
------------------------------------------------------------------------

Exact source excerpt. Text positions 7569–9025, end exclusive, in the original decoded publication. SHA-256: 0594fda57ac89e68133319f9d711cfc9bc830cf0f4c0eaa623d8905a03c00ae6

Alternative Methods of Compliance (AMOCs)
(f) Alternative Methods of Compliance (AMOCs)

    The Manager, Engine Certification Office, FAA, has the authority 
to approve AMOCs for this AD, if requested using the procedures 
found in 14 CFR 39.19.

Exact source excerpt. Text positions 9025–9231, end exclusive, in the original decoded publication. SHA-256: eaf15aef874a1307e04fcbd2de1d3220672a5f2da66ad1cbbae27a5512efee3a

Related Information
(g) Related Information

    (1) Refer to EASA Airworthiness Directive 2011-0082, dated May 
10, 2011, for related information.
    (2) Contact Mark Riley, Aerospace Engineer, Engine Certification 
Office, FAA, Engine & Propeller Directorate, 12 New England 
Executive Park, Burlington, MA 01803; email: [email protected]; 
phone: (781) 238-7758; fax: (781) 238-7199, for more information 
about this AD.

Exact source excerpt. Text positions 9231–9637, end exclusive, in the original decoded publication. SHA-256: dc79d33b193670af2fb9a63a4486eb28a7cbc63eb9dd800fc8bb566e9c038959

Material Incorporated by Reference
(h) Material Incorporated by Reference

    None.

Exact source excerpt. Text positions 9637–9688, end exclusive, in the original decoded publication. SHA-256: c14259617c26d500631f68cc97462aa236700b3deb6706ba91f99da3e76bcc3d

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2012-01-07 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 049899e5803b4086c3eb0147581d77cba67d0c94c9f71884b97ea3d86e466d1c. Source manifest: a1c04817ff7ab3fd0e3f6f0cf209d59146fb02776df0a6f3ef5413a5f7bbe42b.

Official source · 2012-01-23

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 77, Number 14 (Monday, January 23, 2012)]
[Rules and Regulations]
[Pages 3090-3091]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-1133]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2011-1022; Directorate Identifier 2011-NE-20-AD; 
Amendment 39-16919; AD 2012-01-07]
RIN 2120-AA64


Airworthiness Directives; BRP--POWERTRAIN GMBH & CO KG Rotax 
Reciprocating Engines

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for BRP--
POWERTRAIN GMBH & CO KG Rotax 914 F2, 914 F3, and 914 F4 reciprocating 
engines. This AD results from mandatory continuing airworthiness 
information (MCAI) originated by an aviation authority of another 
country to identify and correct an unsafe condition on an aviation 
product. The MCAI describes the unsafe condition as isolated 
manufacturing deviations reportedly found on the threads of a certain 
batch of fuel pressure regulators, part number (P/N) 887130, installed 
on Rotax 914 F series engines, which could result in fuel leakage 
during engine operation. We are issuing this AD to prevent fuel leaks, 
which could result in an in-flight fire and damage to the aircraft.

DATES: This AD becomes effective February 27, 2012.

ADDRESSES: The Docket Operations office is located at Docket Management 
Facility, U.S. Department of Transportation, 1200 New Jersey Avenue 
SE., West Building Ground Floor, Room W12-140, Washington, DC 20590-
0001.

FOR FURTHER INFORMATION CONTACT: Mark Riley, Aerospace Engineer, Engine 
Certification Office, FAA, Engine & Propeller Directorate, 12 New 
England Executive Park, Burlington, MA 01803; email: 
[email protected]; phone: (781) 238-7758; fax: (781) 238-7199.

SUPPLEMENTARY INFORMATION:

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 to include an AD that would apply to the specified products. 
That NPRM was published in the Federal Register on September 28, 2011 
(76 FR 59950). That NPRM proposed to correct an unsafe condition for 
the specified products. The MCAI states that:

    Isolated manufacturing deviations have been reportedly found on 
the threads of a certain batch of fuel pressure regulators, Part 
Number (P/N) 887130, installed on Rotax 914 F series engines.

The corrective action includes replacing fuel pressure regulators 
listed in Table 1 of this AD with a fuel pressure regulator that is not 
listed in Table 1 of this AD, and is eligible for installation. You may 
obtain further information by examining the MCAI in the AD docket.

Comments

    We gave the public the opportunity to participate in developing 
this AD. We received no comments on the NPRM.

Conclusion

    We reviewed the available data and determined that air safety and 
the public interest require adopting the AD as proposed.

Differences Between This AD and the MCAI or Service Information

    The European Aviation Safety Agency AD requires replacing the fuel 
pressure regulator within 100 flight hours (FHs) or 6 months after the 
effective date of that AD, whichever occurs first. This AD requires 
replacing the fuel pressure regulator within 100 FHs after the 
effective date of this AD.

Costs of Compliance

    We estimate that this AD will affect about 75 products of U.S. 
registry. We also estimate that it will take about 2 work-hours per 
product to comply with this AD. The average labor rate is $85 per work-
hour. Required parts cost about $180 per product. Based on these 
figures, we estimate the cost of the AD on U.S. operators to be 
$26,250.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this AD will not have federalism implications 
under Executive Order 13132. This AD will not have a substantial direct 
effect on the States, on the relationship between the national 
government and the States, or on the distribution of power and 
responsibilities among the various levels of government.
    For the reasons discussed above, I certify this AD:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979); and
    3. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.
    We prepared a regulatory evaluation of the estimated costs to 
comply with this AD and placed it in the AD docket.

Examining the AD Docket

    You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the

[[Page 3091]]

Docket Operations office between 9 a.m. and 5 p.m., Monday through 
Friday, except Federal holidays. The AD docket contains this AD, the 
regulatory evaluation, any comments received, and other information. 
The street address for the Docket Operations office (phone: (800) 647-
5527) is provided in the ADDRESSES section. Comments will be available 
in the AD docket shortly after receipt.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new AD:

2012-01-07 BRP--POWERTRAIN GMBH & CO KG (formerly Bombardier-Rotax 
GmbH): Amendment 39-16919; Docket No. FAA-2011-1022; Directorate 
Identifier 2011-NE-20-AD.

(a) Effective Date

    This airworthiness directive (AD) becomes effective February 27, 
2012.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to BRP--POWERTRAIN GMBH & CO KG Rotax 914 F2, 
914 F3, and 914 F4 reciprocating engines with certain fuel pressure 
regulators, part number (P/N) 887130 installed.

(d) Reason

    This AD was prompted by isolated manufacturing deviations 
reportedly found on the threads of a certain batch of fuel pressure 
regulators, P/N 887130, installed on Rotax 914 F series engines, 
which could result in fuel leakage during engine operation. We are 
issuing this AD to prevent fuel leaks, which could result in an in-
flight fire and damage to the aircraft.

(e) Actions and Compliance

    Within 100 flight hours (FHs) after the effective date of this 
AD, replace fuel pressure regulators listed in Table 1 of this AD 
with a fuel pressure regulator that is not listed in Table 1 of this 
AD, and is eligible for installation.
    (1) After the effective date of this AD, do not install any fuel 
pressure regulator P/N 887130 onto any engine if the fuel pressure 
regulator has a serial number (S/N) listed in Table 1 of this AD.
    (2) After the effective date of this AD, do not install any 
Rotax 914 F series engine on any airplane if it has installed in it 
a fuel pressure regulator P/N 887130 with a S/N listed in Table 1 of 
this AD.

     Table 1--S/Ns of Affected Fuel Pressure Regulators, P/N 887130
------------------------------------------------------------------------
 
---------------------------------------------------------------------------
100200 through 100246 inclusive.
100248 through 100280 inclusive.
100282 through 100293 inclusive.
100295 through 100314 inclusive.
100316 and 100317.
100319 through 100326 inclusive.
100330.
100332 and 100333.
100338 through 100340 inclusive.
100342 through 100345 inclusive.
100348.
100350 through 100355 inclusive.
100357 through 100363 inclusive.
100365 through 100368 inclusive.
100371 and 100372.
100374 through 100376 inclusive.
100379 and 100380.
100395 and 100396.
------------------------------------------------------------------------

(f) Alternative Methods of Compliance (AMOCs)

    The Manager, Engine Certification Office, FAA, has the authority 
to approve AMOCs for this AD, if requested using the procedures 
found in 14 CFR 39.19.

(g) Related Information

    (1) Refer to EASA Airworthiness Directive 2011-0082, dated May 
10, 2011, for related information.
    (2) Contact Mark Riley, Aerospace Engineer, Engine Certification 
Office, FAA, Engine & Propeller Directorate, 12 New England 
Executive Park, Burlington, MA 01803; email: [email protected]; 
phone: (781) 238-7758; fax: (781) 238-7199, for more information 
about this AD.

(h) Material Incorporated by Reference

    None.

    Issued in Burlington, Massachusetts, on January 11, 2012.
Peter A. White,
Manager, Engine & Propeller Directorate, Aircraft Certification 
Service.
[FR Doc. 2012-1133 Filed 1-20-12; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:05:08.516708+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
a0ae6cf2299f0330ff06af9f080103809be6d7fad56f2034531eedbac9725b17
Text SHA-256
049899e5803b4086c3eb0147581d77cba67d0c94c9f71884b97ea3d86e466d1c

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.