Published 2012-02-29 · Federal Register document 2012-4437
Airworthiness Directives; Fokker Services B.V. Airplanes
Publication summary
We are adopting a new airworthiness directive (AD) for certain Fokker Services B.V. Model F.27 Mark 050 and F.28 Mark 0070 and 0100 airplanes. This AD was prompted by reports that the brightness of the tritium exit signs and lighting strips deteriorated below accepted levels. This AD requires a detailed inspection of tritium exit signs and emergency lighting strips, and replacement if necessary. We are issuing this AD to detect and correct insufficient brightness of the tritium exit signs and lighting strips, which could lead to an unsafe evacuation during an emergency, possibly resulting in injury to occupants.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:39.502075+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2012-08bffa249ae9a205
- Source row
- results[57]
- Raw source SHA-256
- 08bffa249ae9a2053bbfc0d74663d089914e83fb91f9bc4c8409ea28239f6875
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 2012-03-03
- Effective date printed in this edition
- 2012-04-04
Read 12 complete recorded clauses
Effective Date
(a) Effective Date
This airworthiness directive (AD) becomes effective April 4,
2012.
Exact source excerpt. Text positions 9007–9100, end exclusive, in the original decoded publication. SHA-256: 88769851fe36fca4e0e518fc8e24aaea5125e702fe90b8e2f6ad01fb5f2dcb43
Affected ADs
(b) Affected ADs
None.
Exact source excerpt. Text positions 9100–9129, end exclusive, in the original decoded publication. SHA-256: 871a4afc60ceeae06e8010585055188633d616078500c45937092bfe892239c0
Applicability wording · Applicability
(c) Applicability
This AD applies to Fokker Services B.V. Model airplanes
identified in paragraphs (c)(1), (c)(2), and (c)(3) of this AD,
certificated in any category.
(1) F.27 Mark 050 airplanes having serial numbers (S/Ns): 20104,
20105, 20121 through 20123 inclusive, 20130 through 20135 inclusive,
20141 through 20145 inclusive, 20150, 20156 through 20176 inclusive,
20178 through 20180 inclusive, 20182 through 20199 inclusive, 20202,
20204 through 20207 inclusive, 20210, 20211, 20213 through 20252
inclusive, 20254 through 20266 inclusive, 20270 through 20279
inclusive, 20281, 20283 through 20288 inclusive, 20296 through 20303
inclusive, 20306, 20307, 20312, 20313, 20316, 20317, 20328, 20331,
20333, and 20335.
(2) F.28 Mark 0070 and 0100 airplanes having S/Ns: 11257, 11258,
11262, 11264 through 11266 inclusive, 11287, 11301, 11317, 11340,
11342, 11352 through 11356 inclusive, 11360, 11368 through 11370
inclusive, 11376, 11377, 11385, 11395, 11402, 11403, 11405 through
11408 inclusive, 11411 through 11419 inclusive, 11425 through 11428
inclusive, 11434 through 11437 inclusive, 11447 through 11449
inclusive, 11457 through 11459 inclusive, 11467, 11469, 11478,
11479, 11481, 11482, 11487, 11492 through 11495 inclusive, 11497,
11498, 11501, 11503, 11506, 11507, 11509, 11514, 11521, 11528,
11529, 11532, 11536 through 11541 inclusive, 11543, 11545, 11547,
11549, 11551, 11553 through 11583 inclusive, and 11585.
(3) F.28 Mark 0100 airplanes, if in a post-Fokker Service
Bulletin SBF100-52-060 configuration, having S/Ns: 11244 through
11256 inclusive, 11259 through 11261 inclusive, 11263, 11267 through
11286 inclusive, 11288 through 11300 inclusive, 11302 through 11316
inclusive, 11318 through 11339 inclusive, 11341, 11343 through 11351
inclusive, 11357 through 11367 inclusive, 11371 through 11375
inclusive, 11378 through 11384 inclusive, 11386 through 11394
inclusive, 11396 through 11401 inclusive, 11404, 11409, 11410, 11420
through 11424 inclusive, 11429 through 11433 inclusive, 11438
through 11446 inclusive, 11450 through 11456 inclusive, 11460
through 11466 inclusive, 11468, 11470 through 11477 inclusive,
11480, 11483 through 11486 inclusive, 11488 through 11491 inclusive,
11496, 11499, 11500, 11502, 11504, 11505, 11508, 11510 through 11513
inclusive, 11515 through 11520 inclusive, 11522, 11523, and 11527.
Exact source excerpt. Text positions 9129–11522, end exclusive, in the original decoded publication. SHA-256: 4ac1d438c3676139b43a8907a56aad0a014e03810dfba62bb11462d979fbfc26
Subject
(d) Subject
Air Transport Association (ATA) of America Code 33: Lights.
Exact source excerpt. Text positions 11522–11600, end exclusive, in the original decoded publication. SHA-256: 9545da19805bcc9931702b8ecdc09c364b78a80e4d7c4c8c689214e0dd657b00
Reason
(e) Reason
This AD was prompted by reports that the brightness of the
tritium exit signs and lighting strips deteriorated below accepted
levels. We are issuing this AD to detect and correct insufficient
brightness of the tritium exit signs and lighting strips, which
could lead to an unsafe evacuation during an emergency, possibly
resulting in injury to occupants.
Exact source excerpt. Text positions 11600–11977, end exclusive, in the original decoded publication. SHA-256: 2fb672800f0917ff3b9f581736f02e67e3491ed2df89c709fc09cb2eb5638730
Compliance
(f) Compliance
You are responsible for having the actions required by this AD
performed within the compliance times specified, unless the actions
have already been done.
Exact source excerpt. Text positions 11977–12155, end exclusive, in the original decoded publication. SHA-256: af3956da952ca797ed39bc4b318e4356f7014ac5b4c12bda0147d37f1ffa6cb8
Actions
(g) Actions
Within six months after the effective date of this AD, do a
detailed visual inspection of the tritium exit signs and emergency
lighting strips for required brightness, in accordance with the
Accomplishment Instructions of Fokker Service Bulletin SBF50-33-038,
dated July 5, 2010; or SBF100-33-023, Revision 1, dated November 4,
2010; as applicable. If any exit signs or emergency lighting strips
are insufficiently bright, before further flight, replace the exit
signs or emergency lighting strips, in accordance with the
Accomplishment Instructions of Fokker Service Bulletin SBF50-33-038,
dated July 5, 2010; or SBF100-33-023, Revision 1, dated November 4,
2010; as applicable. A review of airplane maintenance records is
acceptable in lieu of the inspection in this paragraph if the
tritium exit signs and emergency lighting strips can be conclusively
determined to have been manufactured in 2003 or earlier, from that
review; however, the replacement in this paragraph must be
accomplished before further flight after doing the review.
Exact source excerpt. Text positions 12155–13228, end exclusive, in the original decoded publication. SHA-256: 996c0f389819cde88a575a1c68ca6ade0b09dba362a5c7fcdf725645c4439450
Parts Installation
(h) Parts Installation
As of the effective date of this AD, no person may install any
tritium exit signs or emergency lighting strips if the manufacturing
date is seven years or more before the intended installation date,
or if the manufacturing date cannot be determined; unless the
tritium exit sign or emergency lighting strip has been inspected in
accordance with paragraph (g) of this AD, and does not need
replacement.
Exact source excerpt. Text positions 13228–13665, end exclusive, in the original decoded publication. SHA-256: 7ca4edebde0b45a5d9e865fee4229646dce9602f095c337cf4c0bd3a28c958e6
Credit for Previous Actions
(i) Credit for Previous Actions
This paragraph provides credit for inspection and replacement of
the tritium exit sign or emergency lighting strip, as required by
paragraph (g) of this AD, if those actions were performed before the
effective date of this AD using Fokker Service Bulletin SBF100-33-
023, dated July 5, 2010, as applicable.
Exact source excerpt. Text positions 13665–14013, end exclusive, in the original decoded publication. SHA-256: 6403dce2c8650282c871f5c7a7086d4f51d223a9f3d3d8e938ebe061389e3cd8
Other FAA AD Provisions
(j) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Branch, ANM-116, Transport Airplane Directorate, FAA,
has the authority to approve AMOCs for this AD, if requested using
the procedures found in 14 CFR 39.19. In accordance with 14 CFR
39.19, send your request to your principal inspector or local Flight
Standards District Office, as appropriate. If sending information
directly to the International Branch, send it to ATTN: Tom
Rodriguez, Aerospace Engineer, International Branch, ANM-116,
Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton,
Washington 98057-3356; telephone (425) 227-1137; fax (425) 227-1149.
Information may be emailed to: [email protected].
Before using any approved AMOC, notify your appropriate principal
inspector, or lacking a principal inspector, the manager of the
local flight standards district office/certificate holding district
office. The AMOC approval letter must specifically reference this
AD.
(2) Airworthy Product: For any requirement in this AD to obtain
corrective actions from a manufacturer or other source, use these
actions if they are FAA-approved. Corrective actions are considered
FAA-approved if they are approved by the State of Design Authority
(or their delegated agent). You are required to assure the product
is airworthy before it is returned to service.
Exact source excerpt. Text positions 14013–15471, end exclusive, in the original decoded publication. SHA-256: fc29eaf676234263d59b552cf27cc6fda109035a160fa481c18d195aa3d68fdf
Related Information
(k) Related Information
Refer to MCAI European Aviation Safety Agency Airworthiness
Directive 2010-0261, dated December 9, 2010; for related
information.
(1) Fokker Service Bulletin SBF50-33-038, dated July 5, 2010;
and
(2) Fokker Service Bulletin SBF100-33-023, Revision 1, dated
November 4, 2010.
Exact source excerpt. Text positions 15471–15788, end exclusive, in the original decoded publication. SHA-256: c25d2292f760890cc372b37e58aad90afdbdd420ee708efe473196cf54058256
Material Incorporated by Reference
(l) Material Incorporated by Reference
(1) You must use the following service information to do the
actions required by this AD, unless the AD specifies otherwise. The
Director of the Federal Register approved the incorporation by
reference (IBR) of the following service information under 5 U.S.C.
552(a) and 1 CFR part 51:
(i) Fokker Service Bulletin SBF50-33-038, dated July 5, 2010.
(ii) Fokker Service Bulletin SBF100-33-023, Revision 1, dated
November 4, 2010.
(2) For service information identified in this AD, contact
Fokker Services B.V., Technical Services Dept., P.O. Box 231, 2150
AE Nieuw-Vennep, the Netherlands; telephone +31 (0)252-627-350; fax
+31 (0)252-627-211; email
[email protected]; Internet http://www.myfokkerfleet.com.
(3) You may review copies of the service information at the FAA,
Transport Airplane Directorate, 1601 Lind Avenue SW., Renton,
Washington. For information on the
[[Page 12179]]
availability of this material at the FAA, call 425-227-1221.
(4) You may also review copies of the service information that
is incorporated by reference at the National Archives and Records
Administration (NARA). For information on the availability of this
material at an NARA facility, call 202-741-6030, or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
Exact source excerpt. Text positions 15788–17156, end exclusive, in the original decoded publication. SHA-256: b52b2ce6c16b173ad03bce18579290b1d94bf35e6251217676d8c9aa28c90ece
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2012-03-03 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: db5dccea1d16e2d78a046c12af44753c6152e4edf778b9bf3976b76232cbeecb. Source manifest: bde2bbc2cda7f6f51772b6055376a712b0e80d9e2c1aee65b0e3f18823a99953.
Official source · 2012-02-29
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 77, Number 40 (Wednesday, February 29, 2012)]
[Rules and Regulations]
[Pages 12176-12179]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-4437]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2011-1067; Directorate Identifier 2011-NM-034-AD;
Amendment 39-16944; AD 2012-03-03]
RIN 2120-AA64
Airworthiness Directives; Fokker Services B.V. Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: We are adopting a new airworthiness directive (AD) for certain
Fokker Services B.V. Model F.27 Mark 050 and F.28 Mark 0070 and 0100
airplanes. This AD was prompted by reports that the brightness of the
tritium exit signs and lighting strips deteriorated below accepted
levels. This AD requires a detailed inspection of tritium exit signs
and emergency lighting strips, and replacement if necessary. We are
issuing this AD to detect and correct insufficient brightness of the
tritium exit signs and lighting strips, which could lead to an unsafe
evacuation during an emergency, possibly resulting in injury to
occupants.
[[Page 12177]]
DATES: This AD becomes effective April 4, 2012.
The Director of the Federal Register approved the incorporation by
reference of certain publications listed in this AD as of April 4,
2012.
ADDRESSES: You may examine the AD docket on the Internet at http://www.regulations.gov or in person at the U.S. Department of
Transportation, Docket Operations, M-30, West Building Ground Floor,
Room W12-140, 1200 New Jersey Avenue SE., Washington, DC.
FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aerospace Engineer,
International Branch, ANM-116, Transport Airplane Directorate, FAA,
1601 Lind Avenue SW., Renton, Washington 98057-3356; telephone (425)
227-1137; fax (425) 227-1149.
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR
part 39 to include an AD that would apply to the specified products.
That NPRM was published in the Federal Register on October 11, 2011 (76
FR 62658). That NPRM proposed to correct an unsafe condition for the
specified products. The MCAI states:
As required by current certification standards, each transport
aeroplane has passenger compartment exit signs and emergency
lighting strips installed to locate the emergency exits. A number of
these strips and signs are not electrically powered, but are self
illuminated by means of a hydrogen isotope, known as Tritium. As
this isotope decays over time, these signs will [lose] their
brightness.
To remain compliant with regulations, Tritium exit signs and
lighting strips should be replaced when their brightness has
deteriorated below accepted levels. Currently, the Maintenance
Review Board (MRB) Maintenance Planning Document does not include an
inspection task for signs and strips containing Tritium.
This condition, if not detected and corrected, could result in
insufficiently bright exit signs and lighting strips, preventing
safe evacuation during an emergency, possibly resulting in injury to
occupants.
To correct this unsafe condition, EASA issued AD 2010-0200,
which required [a detailed visual] inspection of the brightness of
all Tritium exit signs and strips and, depending on findings,
replacement of insufficiently bright signs and lighting strips.
Following the issuance of [EASA] AD 2010-0200, Fokker Services
discovered that one Service Bulletin (SB), SBF100-33-023, contained
errors in the two groups of aeroplane serial numbers and,
consequently, in the related instructions for those aeroplanes in
that SB.
For the reasons described above, this new [EASA] AD retains the
requirements of EASA AD 2010-0200, which is superseded, amends the
Applicability and refers to Revision 1 of SBF100-33-023 for the
accomplishment instructions.
Note: The MRB document will be updated before July 2011 to
include an appropriate maintenance task to ensure that the Tritium
exit signs and lighting strips meet the minimum brightness
requirements.
You may obtain further information by examining the MCAI in the AD
docket.
Comments
We gave the public the opportunity to participate in developing
this AD. We considered the comment received. The commenter supports the
NPRM (76 FR 62658, October 11, 2011).
Additional Change Made to This Final Rule
We have revised the heading for and wording in paragraph (i) of
this AD; this change has not changed the intent of that paragraph.
Conclusion
We reviewed the relevant data, considered the comment received, and
determined that air safety and the public interest require adopting the
AD with the change described previously--and minor editorial changes.
We have determined that these minor changes:
<bullet> Are consistent with the intent that was proposed in the
NPRM (76 FR 62658, October 11, 2011) for correcting the unsafe
condition; and
<bullet> Do not add any additional burden upon the public than was
already proposed in the NPRM (76 FR 62658, October 11, 2011).
Costs of Compliance
We estimate that this AD will affect 4 products of U.S. registry.
We also estimate that it will take about 1 work-hour per product to
comply with the basic requirements of this AD. The average labor rate
is $85 per work-hour. Based on these figures, we estimate the cost of
this AD to the U.S. operators to be $340, or $85 per product.
In addition, we estimate that any necessary follow-on actions would
take about 2 work-hours and require parts costing $833, for a cost of
$1,003 per product. We have no way of determining the number of
products that may need these actions.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's
authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications
under Executive Order 13132. This AD will not have a substantial direct
effect on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government.
For the reasons discussed above, I certify this AD:
1. Is not a ''significant regulatory action'' under Executive Order
12866;
2. Is not a ''significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979); and
3. Will not affect intrastate aviation in Alaska; and
4. Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared a regulatory evaluation of the estimated costs to
comply with this AD and placed it in the AD docket.
Examining the AD Docket
You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Operations office
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The AD docket contains the NPRM (76 FR 62658, October 11,
2011), the regulatory evaluation, any comments received, and other
information. The street address for the Docket Operations office
(telephone (800) 647-5527) is in the ADDRESSES section. Comments will
be available in the AD docket shortly after receipt.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator,
[[Page 12178]]
the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new AD:
2012-03-03 Fokker Services B.V.: Amendment 39-16944. Docket No. FAA-
2011-1067; Directorate Identifier 2011-NM-034-AD.
(a) Effective Date
This airworthiness directive (AD) becomes effective April 4,
2012.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Fokker Services B.V. Model airplanes
identified in paragraphs (c)(1), (c)(2), and (c)(3) of this AD,
certificated in any category.
(1) F.27 Mark 050 airplanes having serial numbers (S/Ns): 20104,
20105, 20121 through 20123 inclusive, 20130 through 20135 inclusive,
20141 through 20145 inclusive, 20150, 20156 through 20176 inclusive,
20178 through 20180 inclusive, 20182 through 20199 inclusive, 20202,
20204 through 20207 inclusive, 20210, 20211, 20213 through 20252
inclusive, 20254 through 20266 inclusive, 20270 through 20279
inclusive, 20281, 20283 through 20288 inclusive, 20296 through 20303
inclusive, 20306, 20307, 20312, 20313, 20316, 20317, 20328, 20331,
20333, and 20335.
(2) F.28 Mark 0070 and 0100 airplanes having S/Ns: 11257, 11258,
11262, 11264 through 11266 inclusive, 11287, 11301, 11317, 11340,
11342, 11352 through 11356 inclusive, 11360, 11368 through 11370
inclusive, 11376, 11377, 11385, 11395, 11402, 11403, 11405 through
11408 inclusive, 11411 through 11419 inclusive, 11425 through 11428
inclusive, 11434 through 11437 inclusive, 11447 through 11449
inclusive, 11457 through 11459 inclusive, 11467, 11469, 11478,
11479, 11481, 11482, 11487, 11492 through 11495 inclusive, 11497,
11498, 11501, 11503, 11506, 11507, 11509, 11514, 11521, 11528,
11529, 11532, 11536 through 11541 inclusive, 11543, 11545, 11547,
11549, 11551, 11553 through 11583 inclusive, and 11585.
(3) F.28 Mark 0100 airplanes, if in a post-Fokker Service
Bulletin SBF100-52-060 configuration, having S/Ns: 11244 through
11256 inclusive, 11259 through 11261 inclusive, 11263, 11267 through
11286 inclusive, 11288 through 11300 inclusive, 11302 through 11316
inclusive, 11318 through 11339 inclusive, 11341, 11343 through 11351
inclusive, 11357 through 11367 inclusive, 11371 through 11375
inclusive, 11378 through 11384 inclusive, 11386 through 11394
inclusive, 11396 through 11401 inclusive, 11404, 11409, 11410, 11420
through 11424 inclusive, 11429 through 11433 inclusive, 11438
through 11446 inclusive, 11450 through 11456 inclusive, 11460
through 11466 inclusive, 11468, 11470 through 11477 inclusive,
11480, 11483 through 11486 inclusive, 11488 through 11491 inclusive,
11496, 11499, 11500, 11502, 11504, 11505, 11508, 11510 through 11513
inclusive, 11515 through 11520 inclusive, 11522, 11523, and 11527.
(d) Subject
Air Transport Association (ATA) of America Code 33: Lights.
(e) Reason
This AD was prompted by reports that the brightness of the
tritium exit signs and lighting strips deteriorated below accepted
levels. We are issuing this AD to detect and correct insufficient
brightness of the tritium exit signs and lighting strips, which
could lead to an unsafe evacuation during an emergency, possibly
resulting in injury to occupants.
(f) Compliance
You are responsible for having the actions required by this AD
performed within the compliance times specified, unless the actions
have already been done.
(g) Actions
Within six months after the effective date of this AD, do a
detailed visual inspection of the tritium exit signs and emergency
lighting strips for required brightness, in accordance with the
Accomplishment Instructions of Fokker Service Bulletin SBF50-33-038,
dated July 5, 2010; or SBF100-33-023, Revision 1, dated November 4,
2010; as applicable. If any exit signs or emergency lighting strips
are insufficiently bright, before further flight, replace the exit
signs or emergency lighting strips, in accordance with the
Accomplishment Instructions of Fokker Service Bulletin SBF50-33-038,
dated July 5, 2010; or SBF100-33-023, Revision 1, dated November 4,
2010; as applicable. A review of airplane maintenance records is
acceptable in lieu of the inspection in this paragraph if the
tritium exit signs and emergency lighting strips can be conclusively
determined to have been manufactured in 2003 or earlier, from that
review; however, the replacement in this paragraph must be
accomplished before further flight after doing the review.
(h) Parts Installation
As of the effective date of this AD, no person may install any
tritium exit signs or emergency lighting strips if the manufacturing
date is seven years or more before the intended installation date,
or if the manufacturing date cannot be determined; unless the
tritium exit sign or emergency lighting strip has been inspected in
accordance with paragraph (g) of this AD, and does not need
replacement.
(i) Credit for Previous Actions
This paragraph provides credit for inspection and replacement of
the tritium exit sign or emergency lighting strip, as required by
paragraph (g) of this AD, if those actions were performed before the
effective date of this AD using Fokker Service Bulletin SBF100-33-
023, dated July 5, 2010, as applicable.
(j) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Branch, ANM-116, Transport Airplane Directorate, FAA,
has the authority to approve AMOCs for this AD, if requested using
the procedures found in 14 CFR 39.19. In accordance with 14 CFR
39.19, send your request to your principal inspector or local Flight
Standards District Office, as appropriate. If sending information
directly to the International Branch, send it to ATTN: Tom
Rodriguez, Aerospace Engineer, International Branch, ANM-116,
Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton,
Washington 98057-3356; telephone (425) 227-1137; fax (425) 227-1149.
Information may be emailed to: [email protected].
Before using any approved AMOC, notify your appropriate principal
inspector, or lacking a principal inspector, the manager of the
local flight standards district office/certificate holding district
office. The AMOC approval letter must specifically reference this
AD.
(2) Airworthy Product: For any requirement in this AD to obtain
corrective actions from a manufacturer or other source, use these
actions if they are FAA-approved. Corrective actions are considered
FAA-approved if they are approved by the State of Design Authority
(or their delegated agent). You are required to assure the product
is airworthy before it is returned to service.
(k) Related Information
Refer to MCAI European Aviation Safety Agency Airworthiness
Directive 2010-0261, dated December 9, 2010; for related
information.
(1) Fokker Service Bulletin SBF50-33-038, dated July 5, 2010;
and
(2) Fokker Service Bulletin SBF100-33-023, Revision 1, dated
November 4, 2010.
(l) Material Incorporated by Reference
(1) You must use the following service information to do the
actions required by this AD, unless the AD specifies otherwise. The
Director of the Federal Register approved the incorporation by
reference (IBR) of the following service information under 5 U.S.C.
552(a) and 1 CFR part 51:
(i) Fokker Service Bulletin SBF50-33-038, dated July 5, 2010.
(ii) Fokker Service Bulletin SBF100-33-023, Revision 1, dated
November 4, 2010.
(2) For service information identified in this AD, contact
Fokker Services B.V., Technical Services Dept., P.O. Box 231, 2150
AE Nieuw-Vennep, the Netherlands; telephone +31 (0)252-627-350; fax
+31 (0)252-627-211; email
[email protected]; Internet http://www.myfokkerfleet.com.
(3) You may review copies of the service information at the FAA,
Transport Airplane Directorate, 1601 Lind Avenue SW., Renton,
Washington. For information on the
[[Page 12179]]
availability of this material at the FAA, call 425-227-1221.
(4) You may also review copies of the service information that
is incorporated by reference at the National Archives and Records
Administration (NARA). For information on the availability of this
material at an NARA facility, call 202-741-6030, or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
Issued in Renton, Washington, on January 26, 2012.
Kalene C. Yanamura,
Acting Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 2012-4437 Filed 2-28-12; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:04:22.539984+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- 26f8fbe70e7b760e87f1fd8af96ae953b589e9df0e8bfdb71cea1f70c488427a
- Text SHA-256
- db5dccea1d16e2d78a046c12af44753c6152e4edf778b9bf3976b76232cbeecb
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.