Published 2014-06-12 · Federal Register document 2014-13532
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines
Publication summary
We are adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-725A1-12 turbofan engines. This AD requires removal of affected fuel metering units (FMUs) on RRD BR700-725A1-12 engines. This AD was prompted by reports of wear on the receptors of the double-ended unions in the FMU housing on BR700-725A1-12 engines causing fuel leakage. We are issuing this AD to prevent failure of the FMU, which could lead to damage to one or more engines and damage to the airplane.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:45.694519+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2014-642efe379108139d
- Source row
- results[150]
- Raw source SHA-256
- 642efe379108139d70cbf0492188bfdaee07f4da1173b6bc01335f4de404a707
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 2014-12-03
- Effective date printed in this edition
- 2014-07-17
Read 10 complete recorded clauses
Effective Date
(a) Effective Date
This AD becomes effective July 17, 2014.
Exact source excerpt. Text positions 6542–6608, end exclusive, in the original decoded publication. SHA-256: effa899db24c14a0d35ff3a943567790d576d0ae06bd4791b2b1acd78995686a
Affected ADs
(b) Affected ADs
None.
Exact source excerpt. Text positions 6608–6637, end exclusive, in the original decoded publication. SHA-256: 871a4afc60ceeae06e8010585055188633d616078500c45937092bfe892239c0
Applicability wording · Applicability
(c) Applicability
This AD applies to all Rolls-Royce Deutschland Ltd & Co KG (RRD)
BR700-725A1-12 turbofan engines.
Exact source excerpt. Text positions 6637–6760, end exclusive, in the original decoded publication. SHA-256: d3ced50995405a5d2398632415974b1f5a1326567859f2949629ebf7e9e084ff
Reason
(d) Reason
This AD was prompted by reports of wear on the receptors of the
double-ended unions in the fuel metering unit (FMU) housing on RRD
BR700-725A1-12 engines causing fuel leakage. We are issuing this AD
to prevent failure of the FMU, which could lead to damage to one or
more engines and damage to the airplane.
Exact source excerpt. Text positions 6760–7089, end exclusive, in the original decoded publication. SHA-256: 432a427a7ceccfcd89d2f8474e3f1d87652c9b0f6a43d745866e5765b040d295
Actions and Compliance
(e) Actions and Compliance
Comply with this AD within the compliance times specified,
unless already done.
(1) After the effective date of this AD, before the FMU has
accumulated 650 flight hours (FHs) since new, or within 30 days,
whichever occurs later, remove FMU, part number (P/N) G3000FMU02 or
P/N G3000FMU03, and replace it with a part eligible for
installation.
(2) Thereafter, remove the FMU at intervals not to exceed 650
FHs and replace it with a part eligible for installation.
Exact source excerpt. Text positions 7089–7599, end exclusive, in the original decoded publication. SHA-256: 415a6e3bcc755d22073fe70ff1239b885a32c1f674c6b05e12c2fd41258152db
Installation Prohibition
(f) Installation Prohibition
After the effective date of this AD, do not install FMU, P/N
G3000FMU02, onto any engine, or install any engine with FMU, P/N
G3000FMU02, onto any airplane.
Exact source excerpt. Text positions 7599–7793, end exclusive, in the original decoded publication. SHA-256: abf437fda80e6eea9fd883241d39124c79b3cb1e0c6d94e5d8b94ac42f82c1f0
Definition
(g) Definition
For the purpose of this AD, an FMU eligible for installation is
a new FMU or an FMU with P/N G3000FMU03 that has accumulated fewer
than 650 FHs since installation on any airplane or since last repair
using RRD Alert Non-Modification Service Bulletin (NMSB) No. SB-
BR700-73-A900309, Revision 1, dated November 8, 2013.
Exact source excerpt. Text positions 7793–8136, end exclusive, in the original decoded publication. SHA-256: f9c7bb054554fff2ae271d5699efb33fb4cda2937aacf73c7b97bf072c234e70
Alternative Methods of Compliance (AMOCs)
(h) Alternative Methods of Compliance (AMOCs)
The Manager, Engine Certification Office, may approve AMOCs for
this AD. Use the procedures found in 14 CFR 39.19 to make your
request.
Exact source excerpt. Text positions 8136–8326, end exclusive, in the original decoded publication. SHA-256: 23eb1ba6be5c70c76a3acf4c47bf79dc0d7bd6b4bcec9c60a343d5a6501d936a
Related Information
(i) Related Information
(1) For more information about this AD, contact Michael Davison,
Aerospace Engineer, Engine Certification Office, FAA, Engine &
Propeller Directorate, 12 New England Executive Park, Burlington, MA
01803; phone: (781) 238-7156; fax: (781) 238-7199; email:
[email protected].
(2) Refer to MCAI European Aviation Safety Agency AD 2013-
0229R1, dated November 21, 2013 for more information. You may
examine the MCAI in the AD docket on the Internet by searching for
it and locating it in Docket No. FAA-2013-0882.
(3) RRD Alert NMSB No. SB-BR700-73-A900309, Revision 1, dated
November 8, 2013, which is not incorporated by reference in this AD,
can be obtained from RRD, using the contact information in paragraph
(i)(4) of this AD.
(4) For service information identified in this AD, contact
Rolls-Royce Deutschland Ltd & Co KG, Eschenweg 11, Dahlewitz, 15827
[[Page 33681]]
Blankenfelde-Mahlow, Germany; phone: 49 0 33-7086-1944; fax: 49 0
33-7086-3276.
(5) You may view this service information at the FAA, Engine &
Propeller Directorate, 12 New England Executive Park, Burlington,
MA. For information on the availability of this material at the FAA,
call 781-238-7125.
Exact source excerpt. Text positions 8326–9556, end exclusive, in the original decoded publication. SHA-256: 7b254c87a617cc06a8faebf061a2cc2e9e9ed415fd0414f23253394724f5200c
Material Incorporated by Reference
(j) Material Incorporated by Reference
None.
Exact source excerpt. Text positions 9556–9607, end exclusive, in the original decoded publication. SHA-256: 9d583edbcf085b1fae94c8be8274ba3ce59b91db7bf15c5f5fd81fff2816eec7
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2014-12-03 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 218378af54a8b002222174407ba370bbcc707a7f23a2bbe5beb6fed8f03c578f. Source manifest: dcf8be72a102b102f2e3ce1db7591f98c8d0acd3b24e66e2e49c579758313363.
Official source · 2014-06-12
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 79, Number 113 (Thursday, June 12, 2014)]
[Rules and Regulations]
[Pages 33679-33681]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2014-13532]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2013-0882; Directorate Identifier 2013-NE-29-AD;
Amendment 39-17864; AD 2014-12-03]
RIN 2120-AA64
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG
Turbofan Engines
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: We are adopting a new airworthiness directive (AD) for all
Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-725A1-12 turbofan
engines. This AD requires removal of affected fuel metering units
(FMUs) on RRD BR700-725A1-12 engines. This AD was prompted by reports
of wear on the receptors of the double-ended unions in the FMU housing
on BR700-725A1-12 engines causing fuel leakage. We are issuing this AD
to prevent failure of the FMU, which could lead to damage to one or
more engines and damage to the airplane.
DATES: This AD becomes effective July 17, 2014.
ADDRESSES: For service information identified in this AD, contact
Rolls-Royce Deutschland Ltd & Co KG, Eschenweg 11, Dahlewitz, 15827
Blankenfelde-Mahlow, Germany; phone: 49 0 33-7086-1883; fax: 49 0 33-
7086-3276. You may view this service information at the FAA, Engine &
Propeller Directorate, 12 New England Executive Park, Burlington, MA
01803. For information on the availability of this material at the FAA,
call 781-238-7125.
Examining the AD Docket
You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2013-
0882; or in person at the Docket Management Facility between 9 a.m. and
5 p.m., Monday through Friday, except Federal holidays. The AD docket
contains this AD, the mandatory continuing airworthiness information
(MCAI), the regulatory evaluation, any comments received, and other
information. The address for the Docket Office (phone: 800-647-5527) is
Document Management Facility, U.S. Department of Transportation, Docket
Operations, M-30, West Building Ground Floor, Room W12-140, 1200
[[Page 33680]]
New Jersey Avenue SE., Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Michael Davison, Aerospace Engineer,
Engine Certification Office, FAA, Engine & Propeller Directorate, 12
New England Executive Park, Burlington, MA 01803; phone: (781) 238-
7156; fax: (781) 238-7199; email: [email protected].
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR
part 39 by adding an AD that would apply to the specified products. The
NPRM was published in the Federal Register on February 14, 2014 (79 FR
8905). The NPRM proposed to correct an unsafe condition for the
specified products. The MCAI states:
Occurrences have been reported of finding wear on the receptors
of the double-ended unions in the Fuel Metering Unit (FMU) housing
on BR700-725A1-12 engines.
This condition, if not corrected, could lead to fuel leak
resulting in engine in-flight shutdown and consequent reduced
control of the aeroplane.
Comments
We gave the public the opportunity to participate in developing
this AD. We received no comments on the NPRM (79 FR 8905, February 14,
2014).
Conclusion
We reviewed the available data and determined that air safety and
the public interest require adopting this AD as proposed.
Costs of Compliance
We estimate that this AD affects 24 RRD turbofan engines installed
on aircraft of U.S. registry. We also estimate that it would take about
6 hours per engine to comply with this AD. The average labor rate is
$85 per hour. Required parts cost about $293,960 per engine. Based on
these figures, we estimate the cost of this AD on U.S. operators to be
$7,067,280.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's
authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications
under Executive Order 13132. This AD will not have a substantial direct
effect on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government.
For the reasons discussed above, I certify this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979),
(3) Will not affect intrastate aviation in Alaska to the extent
that it justifies making a regulatory distinction, and
(4) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive (AD):
2014-12-03 Rolls-Royce Deutschland Ltd & Co KG: Amendment 39-17864;
Docket No. FAA-2013-0882; Directorate Identifier 2013-NE-29-AD.
(a) Effective Date
This AD becomes effective July 17, 2014.
(b) Affected ADs
None.
(c) Applicability
This AD applies to all Rolls-Royce Deutschland Ltd & Co KG (RRD)
BR700-725A1-12 turbofan engines.
(d) Reason
This AD was prompted by reports of wear on the receptors of the
double-ended unions in the fuel metering unit (FMU) housing on RRD
BR700-725A1-12 engines causing fuel leakage. We are issuing this AD
to prevent failure of the FMU, which could lead to damage to one or
more engines and damage to the airplane.
(e) Actions and Compliance
Comply with this AD within the compliance times specified,
unless already done.
(1) After the effective date of this AD, before the FMU has
accumulated 650 flight hours (FHs) since new, or within 30 days,
whichever occurs later, remove FMU, part number (P/N) G3000FMU02 or
P/N G3000FMU03, and replace it with a part eligible for
installation.
(2) Thereafter, remove the FMU at intervals not to exceed 650
FHs and replace it with a part eligible for installation.
(f) Installation Prohibition
After the effective date of this AD, do not install FMU, P/N
G3000FMU02, onto any engine, or install any engine with FMU, P/N
G3000FMU02, onto any airplane.
(g) Definition
For the purpose of this AD, an FMU eligible for installation is
a new FMU or an FMU with P/N G3000FMU03 that has accumulated fewer
than 650 FHs since installation on any airplane or since last repair
using RRD Alert Non-Modification Service Bulletin (NMSB) No. SB-
BR700-73-A900309, Revision 1, dated November 8, 2013.
(h) Alternative Methods of Compliance (AMOCs)
The Manager, Engine Certification Office, may approve AMOCs for
this AD. Use the procedures found in 14 CFR 39.19 to make your
request.
(i) Related Information
(1) For more information about this AD, contact Michael Davison,
Aerospace Engineer, Engine Certification Office, FAA, Engine &
Propeller Directorate, 12 New England Executive Park, Burlington, MA
01803; phone: (781) 238-7156; fax: (781) 238-7199; email:
[email protected].
(2) Refer to MCAI European Aviation Safety Agency AD 2013-
0229R1, dated November 21, 2013 for more information. You may
examine the MCAI in the AD docket on the Internet by searching for
it and locating it in Docket No. FAA-2013-0882.
(3) RRD Alert NMSB No. SB-BR700-73-A900309, Revision 1, dated
November 8, 2013, which is not incorporated by reference in this AD,
can be obtained from RRD, using the contact information in paragraph
(i)(4) of this AD.
(4) For service information identified in this AD, contact
Rolls-Royce Deutschland Ltd & Co KG, Eschenweg 11, Dahlewitz, 15827
[[Page 33681]]
Blankenfelde-Mahlow, Germany; phone: 49 0 33-7086-1944; fax: 49 0
33-7086-3276.
(5) You may view this service information at the FAA, Engine &
Propeller Directorate, 12 New England Executive Park, Burlington,
MA. For information on the availability of this material at the FAA,
call 781-238-7125.
(j) Material Incorporated by Reference
None.
Issued in Burlington, Massachusetts, on June 3, 2014.
Colleen M. D'Alessandro,
Assistant Directorate Manager, Engine & Propeller Directorate, Aircraft
Certification Service.
[FR Doc. 2014-13532 Filed 6-11-14; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T02:47:45.294252+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- 580804cc3288bedc993a72aec7896d1cf56b003d05ee6dece7cf63e815681446
- Text SHA-256
- 218378af54a8b002222174407ba370bbcc707a7f23a2bbe5beb6fed8f03c578f
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.