Published 2016-09-26 · Federal Register document 2016-22187
Airworthiness Directives; The Boeing Company Airplanes
Publication summary
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This AD was prompted by a report of uncommanded movement by a captain's seat during a landing rollout due to a failure in the seat horizontal actuator. This AD requires repetitive tests of the captain and first officer seat assemblies for proper operation, and corrective action if necessary. This AD also requires installation of new captain and first officer seat assemblies, which terminates the repetitive tests. We are issuing this AD to prevent a seat actuator clutch failure, which could result in a loss of seat locking and uncommanded motion of the captain's or first officer's seat; uncommanded seat movement could result in reduced controllability of the airplane.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:51.853224+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2016-48fe8cb6c57c00b7
- Source row
- results[314]
- Raw source SHA-256
- 48fe8cb6c57c00b74623eb2b71ad0abe73b95a424a8ac83fecd389da4d1e3a81
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 2016-19-04
- Effective date printed in this edition
- 2016-10-31
Read 11 complete recorded clauses
Effective Date
(a) Effective Date
This AD is effective October 31, 2016.
Exact source excerpt. Text positions 13935–13999, end exclusive, in the original decoded publication. SHA-256: 47b6275513457911b572d6b56bd815cdc58d625cabbb18d623dcffdb2c40b437
Affected ADs
(b) Affected ADs
None.
Exact source excerpt. Text positions 13999–14029, end exclusive, in the original decoded publication. SHA-256: 597389e6466a4b66659786249f95b15b2a8b4e2cb58218a081a5f43d87d50c07
Applicability wording · Applicability
(c) Applicability
This AD applies to The Boeing Company Model 787-8 airplanes,
certificated in any category, as identified in Boeing Alert Service
Bulletin B787-81205-SB250054-00, Issue 001, dated December 19, 2014.
Exact source excerpt. Text positions 14029–14254, end exclusive, in the original decoded publication. SHA-256: aab617a6dc765f6cb1bb02884231eaa4fdb4751bb9e3611c2180ed77cc60fcd9
Subject
(d) Subject
Air Transport Association (ATA) of America Code 25, Equipment/
furnishings.
Exact source excerpt. Text positions 14254–14349, end exclusive, in the original decoded publication. SHA-256: 315c273687e5204beb324d794da806b80659343d897f0745aeaf183cf05d86b3
Unsafe Condition
(e) Unsafe Condition
This AD was prompted by a report of uncommanded movement by a
captain's seat during a landing rollout due to a failure in the seat
horizontal actuator. We are issuing this AD to prevent a seat
actuator clutch failure, which could result in a loss of seat
locking and uncommanded motion of the captain's or first officer's
seat; uncommanded seat motion could result in reduced
controllability of the airplane.
Exact source excerpt. Text positions 14349–14792, end exclusive, in the original decoded publication. SHA-256: ded68e047ff2fb734768b66148ec5264bd8ffdfe141343cad5a4457cb65050a0
Compliance
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
Exact source excerpt. Text positions 14792–14895, end exclusive, in the original decoded publication. SHA-256: 7b52a200ff3033544449321ef0414491b74cdf69f40d907775948e444f9923c5
Repetitive Tests of Captain and First Officer Seat Assembly Operation
(g) Repetitive Tests of Captain and First Officer Seat Assembly
Operation
Within 1,000 flight hours after the effective date of this AD,
test the operation of the captain and first officer seat assemblies
and do all applicable corrective actions, in accordance with the
Accomplishment Instructions of Boeing Alert Service Bulletin B787-
81205-SB250054-00, Issue 001, dated December 19, 2014. Do all
applicable corrective actions before further flight. Repeat the
operational test thereafter at intervals not to exceed 1,000 flight
hours until the installation required by paragraph (h) of this AD is
done.
Exact source excerpt. Text positions 14895–15516, end exclusive, in the original decoded publication. SHA-256: eda96fcee1dabae902aca029d3457846740176e45fb7343060653f643b46056c
New Seat Installation
(h) New Seat Installation
Within 72 months after the effective date of this AD, do the
actions specified in paragraphs (h)(1) and (h)(2) of this AD.
Installing the seat specified in paragraph (h)(1) or (h)(2) of this
AD, as applicable, is terminating action for the repetitive
operational tests required by paragraph (g) of this AD for that seat
only.
(1) Install a new captain seat assembly, in accordance with
paragraph 2.F., ``Part 3: Terminating Action: Captain Seat Assembly
Replacement,'' of the Accomplishment Instructions of Boeing Alert
Service Bulletin B787-81205-SB250054-00, Issue 001, dated December
19, 2014.
(2) Install a new first officer seat assembly, in accordance
with paragraph 2.I., ``Part 6: Terminating Action: First Officer
Seat Assembly Replacement,'' of the Accomplishment Instructions of
Boeing Alert Service Bulletin B787-81205-SB250054-00, Issue 001,
dated December 19, 2014.
Exact source excerpt. Text positions 15516–16450, end exclusive, in the original decoded publication. SHA-256: c8e2035161a72d100facd62e811c76f73981724c11244091895dbadf98803f22
Alternative Methods of Compliance (AMOCs)
(i) Alternative Methods of Compliance (AMOCs)
(1) The Manager, Seattle Aircraft Certification Office (ACO),
FAA, has the authority to approve AMOCs for this AD, if requested
using the procedures found in 14 CFR 39.19. In accordance with 14
CFR 39.19, send your request to your principal inspector or local
Flight Standards District Office, as appropriate. If sending
information directly to the manager of the ACO, send it to the
attention of the person identified in paragraph (j) of this AD.
Information may be emailed to: [email protected].
(2) Before using any approved AMOC, notify your appropriate
principal inspector, or lacking a principal inspector, the manager
of the local flight standards district office/certificate holding
district office.
(3) An AMOC that provides an acceptable level of safety may be
used for any repair, modification, or alteration required by this AD
if it is approved by the Boeing Commercial Airplanes Organization
Designation Authorization (ODA) that has been authorized by the
Manager, Seattle ACO, to make those findings. To be approved, the
repair method, modification deviation, or alteration deviation must
meet the certification basis of the airplane and the approval must
specifically refer to this AD.
(4) For service information that contains steps that are labeled
as Required for Compliance (RC), the provisions of
[[Page 65860]]
paragraphs (i)(4)(i) and (i)(4)(ii) of this AD, apply.
(i) The steps labeled as RC, including substeps under an RC step
and any figures identified in an RC step, must be done to comply
with the AD. An AMOC is required for any deviations to RC steps,
including substeps and identified figures.
(ii) Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection
program without obtaining approval of an AMOC, provided the RC
steps, including substeps and identified figures, can still be done
as specified, and the airplane can be put back in an airworthy
condition.
Exact source excerpt. Text positions 16450–18515, end exclusive, in the original decoded publication. SHA-256: 42257cb0c38ce24c0eeb57dd2403451363eb122d2e7572668c28eb3bb11be17d
Related Information
(j) Related Information
For more information about this AD, contact Brandon Lucero,
Aerospace Engineer, Cabin Safety and Environmental Systems Branch,
ANM-150S, FAA, Seattle Aircraft Certification Office (ACO), 1601
Lind Avenue SW., Renton, WA 98057-3356; phone: 425-917-6572; fax:
425-917-6590; email: [email protected].
Exact source excerpt. Text positions 18515–18848, end exclusive, in the original decoded publication. SHA-256: e58a1b0d232f55211b8a58fc2885e0a085176b38f8610bc8bb7f4599cf038e1e
Material Incorporated by Reference
(k) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless the AD specifies otherwise.
(i) Boeing Alert Service Bulletin B787-81205-SB250054-00, Issue
001, dated December 19, 2014.
(ii) Reserved.
(3) For The Boeing Company service information identified in
this AD, contact Boeing Commercial Airplanes, Attention: Data &
Services Management, P.O. Box 3707, MC 2H-65, Seattle, WA 98124-
2207; telephone: 206-544-5000, extension 1; fax: 206-766-5680;
Internet: https://www.myboeingfleet.com.
(4) You may view this service information at the FAA, Transport
Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For
information on the availability of this material at the FAA, call
425-227-1221.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.
Exact source excerpt. Text positions 18848–20139, end exclusive, in the original decoded publication. SHA-256: c19441f653f5d617ecdb69e9de6f8882dbac10a3559b138cf21478c2af2830ce
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2016-19-04 · 1 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 48edab74548148021700f337aba94e34826b34950f8b74dcd3beac8f6f837e60. Source manifest: fb62a78f6a452afeaee252bfdf05242c7ad997414007e93ac6c9075348e5953d.
Official source · 2016-09-26
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 81, Number 186 (Monday, September 26, 2016)]
[Rules and Regulations]
[Pages 65857-65860]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-22187]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2016-3992; Directorate Identifier 2015-NM-075-AD;
Amendment 39-18653; AD 2016-19-04]
RIN 2120-AA64
Airworthiness Directives; The Boeing Company Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: We are adopting a new airworthiness directive (AD) for certain
The Boeing Company Model 787-8 airplanes. This AD was prompted by a
report of uncommanded movement by a captain's seat during a landing
rollout due to a failure in the seat horizontal actuator. This AD
requires repetitive tests of the captain and first officer seat
assemblies for proper operation, and corrective action if necessary.
This AD also requires installation of new captain and first officer
seat assemblies, which terminates the repetitive tests. We are issuing
this AD to prevent a seat actuator clutch failure, which could result
in a loss of seat locking and uncommanded motion of the captain's or
first officer's seat; uncommanded seat movement could result in reduced
controllability of the airplane.
DATES: This AD is effective October 31, 2016.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of October 31,
2016.
ADDRESSES: For service information identified in this AD, contact
Boeing Commercial Airplanes, Attention: Data & Services Management,
P.O. Box 3707, MC 2H-65, Seattle, WA 98124-2207; telephone: 206-544-
5000, extension 1; fax: 206-766-5680; Internet: https://www.myboeingfleet.com. For information on the availability of this
material at the FAA, call 425-227-1221. It is also available on the
Internet at http://www.regulations.gov by searching for and locating
Docket No. FAA-2016-3992.
Examining the AD Docket
You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-
3992; or in person at the Docket Management Facility between 9 a.m. and
5 p.m., Monday through Friday, except Federal holidays. The AD docket
contains this AD, the regulatory evaluation, any comments received, and
other information. The address for the Docket Office (phone: 800-647-
5527) is Docket Management Facility, U.S. Department of Transportation,
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200
New Jersey Avenue SE., Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Brandon Lucero, Aerospace Engineer,
Cabin Safety and Environmental Systems Branch, ANM-150S, FAA, Seattle
Aircraft Certification Office (ACO), 1601 Lind Avenue SW., Renton, WA
98057-3356; phone: 425-917-6572; fax: 425-917-6590; email:
[email protected].
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR
part 39 by adding an AD that would apply to certain The Boeing Company
Model 787-8 airplanes. The NPRM published in the Federal Register on
March 7, 2016 (81 FR 11687) (``the
[[Page 65858]]
NPRM''). The NPRM was prompted by a report of uncommanded movement by a
captain's seat during a landing rollout due to a failure in the seat
horizontal actuator. The NPRM proposed to require repetitive tests of
the captain and first officer seat assemblies for proper operation, and
corrective action if necessary. The NPRM also proposed to require
installation of new captain and first officer seat assemblies, which
would terminate the repetitive tests. We are issuing this AD to prevent
a seat actuator clutch failure, which could result in a loss of seat
locking and uncommanded motion of the captain's or first officer's
seat; uncommanded seat movement could result in reduced controllability
of the airplane.
Comments
We gave the public the opportunity to participate in developing
this AD. The following presents the comments received on the NPRM and
the FAA's response to each comment.
Request To Remove Service Bulletin Issue Number and Date
Boeing requested that we revise the NPRM to not specify the Service
Bulletin issue number and date, or alternatively to include ``or
subsequent'' when referencing Boeing Alert Service Bulletin B787-81205-
SB250054-00, Issue 001, dated December 19, 2014.
Boeing commented that the seat supplier is currently working on a
related nuisance issue of intermittent electrical operation of the
seat-powered adjustment system. Boeing stated that the resolution to
this issue may result in changes to the part numbers of the actuators
and seat assemblies, and revision to the service bulletin issue number
and date.
We do not agree with the commenter's request to remove the issue
number and date of the service information. We cannot allow use of
``later-approved revisions'' in an AD when referring to the service
document. Doing so violates Office of the Federal Register (OFR)
regulations for approval of materials ``incorporated by reference,'' as
specified in 1 CFR 51.1(f). If for any reason the issue and date of the
service bulletin should change, the FAA may consider issuing an
alternative method of compliance (AMOC) to allow use of a later
revision. We have not changed this AD in this regard.
Request To Remove the Replacement Seat Part Numbers
Boeing requested that we remove the replacement seat part numbers
to be installed as terminating action from this AD, and instead specify
that seats be replaced with part numbers ``as specified in Boeing Alert
Service Bulletin B787-81205-SB250054-00.''
Boeing commented that the seat supplier is currently working on a
related nuisance issue of intermittent electrical operation of the
seat-powered adjustment system. The resolution to this issue may result
in change to the part numbers of the actuators and seat assemblies.
We partially agree with the commenter's request. We have changed
paragraph (h) of this AD to remove the part numbers of the actuators
and seat assemblies from this AD and to include the part numbers
specified in Boeing Alert Service Bulletin B787-81205-SB250054-00.
However, we have included the revision level and date of the service
information for the reasons noted in the previous comment response. The
FAA may consider issuing an AMOC to allow use of a later revision of
the service information.
Request To Allow Credit for Prior Accomplishment of Service Bulletins
United Airlines requested that the AD allow credit for prior
accomplishment of Boeing and Ipeco service information.
We already provide credit in paragraph (f) of this AD for prior
accomplishment of Boeing Alert Service Bulletin B787-81205-SB250054-00,
Issue 001, dated December 19, 2014, if accomplished before the
effective date of this AD. In addition, credit is not necessary for
using the Ipeco service information referenced in Boeing Alert Service
Bulletin B787-81205-SB250054-00, Issue 001, dated December 19, 2014,
because this AD does not specifically require using Ipeco service
information. No change to this AD is necessary.
Conclusion
We reviewed the relevant data, considered the comments received,
and determined that air safety and the public interest require adopting
this AD with the changes described previously and minor editorial
changes. We have determined that these minor changes:
<bullet> Are consistent with the intent that was proposed in the
NPRM for correcting the unsafe condition; and
<bullet> Do not add any additional burden upon the public than was
already proposed in the NPRM.
We also determined that these changes will not increase the
economic burden on any operator or increase the scope of this AD.
Related Service Information Under 1 CFR Part 51
We reviewed Boeing Alert Service Bulletin B787-81205-SB250054-00,
Issue 001, dated December 19, 2014. This service information provides
procedures for installation of new captain and first officer seat
assemblies, a test of the captain and first officer seat assemblies,
and corrective action if necessary. This service information is
reasonably available because the interested parties have access to it
through their normal course of business or by the means identified in
the ADDRESSES section.
Costs of Compliance
We estimate that this AD affects 18 airplanes of U.S. registry.
We estimate the following costs to comply with this AD:
Estimated Costs
----------------------------------------------------------------------------------------------------------------
Cost on U.S.
Action Labor cost Parts cost Cost per product operators
----------------------------------------------------------------------------------------------------------------
Operational test................ 2 work-hours x $85 $0................ $170 per test $3,060 per test
per hour = $170 cycle. cycle.
per test cycle.
Seat assembly installation...... 3 work-hours x $85 $15,141 per seat x $30,537 to replace $549,666.
per hour = $255 2 seats = $30,282. two seats.
to replace two
seats.
----------------------------------------------------------------------------------------------------------------
We estimate the following costs to do any necessary corrective
actions that would be required based on the results of the operational
tests. We have no way of determining the number of aircraft that might
need these actions:
[[Page 65859]]
On-Condition Costs
----------------------------------------------------------------------------------------------------------------
Cost per
Action Labor cost Parts cost product
----------------------------------------------------------------------------------------------------------------
Replacement of captain seat vertical actuator. 2 work-hours x $85 per hour = $7,500 $7,670
$170.
Replacement of captain seat horizontal 2 work-hours x $85 per hour = 7,500 7,670
actuator. $170.
Replacement of first officer seat vertical 2 work-hours x $85 per hour = 7,500 7,670
actuator. $170.
Replacement of first officer seat horizontal 2 work-hours x $85 per hour = 7,500 7,670
actuator. $170.
----------------------------------------------------------------------------------------------------------------
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: ``General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979),
(3) Will not affect intrastate aviation in Alaska, and
(4) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive (AD):
2016-19-04 The Boeing Company: Amendment 39-18653; Docket No. FAA-
2016-3992; Directorate Identifier 2015-NM-075-AD.
(a) Effective Date
This AD is effective October 31, 2016.
(b) Affected ADs
None.
(c) Applicability
This AD applies to The Boeing Company Model 787-8 airplanes,
certificated in any category, as identified in Boeing Alert Service
Bulletin B787-81205-SB250054-00, Issue 001, dated December 19, 2014.
(d) Subject
Air Transport Association (ATA) of America Code 25, Equipment/
furnishings.
(e) Unsafe Condition
This AD was prompted by a report of uncommanded movement by a
captain's seat during a landing rollout due to a failure in the seat
horizontal actuator. We are issuing this AD to prevent a seat
actuator clutch failure, which could result in a loss of seat
locking and uncommanded motion of the captain's or first officer's
seat; uncommanded seat motion could result in reduced
controllability of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Repetitive Tests of Captain and First Officer Seat Assembly
Operation
Within 1,000 flight hours after the effective date of this AD,
test the operation of the captain and first officer seat assemblies
and do all applicable corrective actions, in accordance with the
Accomplishment Instructions of Boeing Alert Service Bulletin B787-
81205-SB250054-00, Issue 001, dated December 19, 2014. Do all
applicable corrective actions before further flight. Repeat the
operational test thereafter at intervals not to exceed 1,000 flight
hours until the installation required by paragraph (h) of this AD is
done.
(h) New Seat Installation
Within 72 months after the effective date of this AD, do the
actions specified in paragraphs (h)(1) and (h)(2) of this AD.
Installing the seat specified in paragraph (h)(1) or (h)(2) of this
AD, as applicable, is terminating action for the repetitive
operational tests required by paragraph (g) of this AD for that seat
only.
(1) Install a new captain seat assembly, in accordance with
paragraph 2.F., ``Part 3: Terminating Action: Captain Seat Assembly
Replacement,'' of the Accomplishment Instructions of Boeing Alert
Service Bulletin B787-81205-SB250054-00, Issue 001, dated December
19, 2014.
(2) Install a new first officer seat assembly, in accordance
with paragraph 2.I., ``Part 6: Terminating Action: First Officer
Seat Assembly Replacement,'' of the Accomplishment Instructions of
Boeing Alert Service Bulletin B787-81205-SB250054-00, Issue 001,
dated December 19, 2014.
(i) Alternative Methods of Compliance (AMOCs)
(1) The Manager, Seattle Aircraft Certification Office (ACO),
FAA, has the authority to approve AMOCs for this AD, if requested
using the procedures found in 14 CFR 39.19. In accordance with 14
CFR 39.19, send your request to your principal inspector or local
Flight Standards District Office, as appropriate. If sending
information directly to the manager of the ACO, send it to the
attention of the person identified in paragraph (j) of this AD.
Information may be emailed to: [email protected].
(2) Before using any approved AMOC, notify your appropriate
principal inspector, or lacking a principal inspector, the manager
of the local flight standards district office/certificate holding
district office.
(3) An AMOC that provides an acceptable level of safety may be
used for any repair, modification, or alteration required by this AD
if it is approved by the Boeing Commercial Airplanes Organization
Designation Authorization (ODA) that has been authorized by the
Manager, Seattle ACO, to make those findings. To be approved, the
repair method, modification deviation, or alteration deviation must
meet the certification basis of the airplane and the approval must
specifically refer to this AD.
(4) For service information that contains steps that are labeled
as Required for Compliance (RC), the provisions of
[[Page 65860]]
paragraphs (i)(4)(i) and (i)(4)(ii) of this AD, apply.
(i) The steps labeled as RC, including substeps under an RC step
and any figures identified in an RC step, must be done to comply
with the AD. An AMOC is required for any deviations to RC steps,
including substeps and identified figures.
(ii) Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection
program without obtaining approval of an AMOC, provided the RC
steps, including substeps and identified figures, can still be done
as specified, and the airplane can be put back in an airworthy
condition.
(j) Related Information
For more information about this AD, contact Brandon Lucero,
Aerospace Engineer, Cabin Safety and Environmental Systems Branch,
ANM-150S, FAA, Seattle Aircraft Certification Office (ACO), 1601
Lind Avenue SW., Renton, WA 98057-3356; phone: 425-917-6572; fax:
425-917-6590; email: [email protected].
(k) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless the AD specifies otherwise.
(i) Boeing Alert Service Bulletin B787-81205-SB250054-00, Issue
001, dated December 19, 2014.
(ii) Reserved.
(3) For The Boeing Company service information identified in
this AD, contact Boeing Commercial Airplanes, Attention: Data &
Services Management, P.O. Box 3707, MC 2H-65, Seattle, WA 98124-
2207; telephone: 206-544-5000, extension 1; fax: 206-766-5680;
Internet: https://www.myboeingfleet.com.
(4) You may view this service information at the FAA, Transport
Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For
information on the availability of this material at the FAA, call
425-227-1221.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued in Renton, Washington, on September 6, 2016.
Michael Kaszycki,
Acting Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 2016-22187 Filed 9-23-16; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-09-08T07:45:29.983332+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- 147d6dbb1cf0dfff4ca5721fbe7851510542979f01009f803e7241bacd034fc4
- Text SHA-256
- 48edab74548148021700f337aba94e34826b34950f8b74dcd3beac8f6f837e60
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.