Published 2020-06-09 · Federal Register document 2020-12374
Airworthiness Directives; Bombardier, Inc., Airplanes
Publication summary
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report of an in-flight event where a flightcrew observed a SPOILER FAIL message and had difficulty maintaining roll control of the airplane. This AD requires revising the existing airplane flight manual (AFM) to provide the flightcrew with procedures related to roll spoiler failures that reduce the flightcrew workload during this type of failure scenario. The FAA is issuing this AD to address the unsafe condition on these products.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:24:04.586324+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2020-f01fbc4d7ab3dbaa
- Source row
- results[151]
- Raw source SHA-256
- f01fbc4d7ab3dbaae6a412acd9ff6cece48db77a6a882e46e8f8087200be3837
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 2020-11-10
- Effective date printed in this edition
- 2020-07-14
Read 10 complete recorded clauses
Effective Date
(a) Effective Date
This AD is effective July 14, 2020.
Exact source excerpt. Text positions 10698–10759, end exclusive, in the original decoded publication. SHA-256: c7c60335bfa0f75ecb8b17dc3d398676af7ead8cb075b065a93f862d5d916eed
Affected ADs
(b) Affected ADs
None.
Exact source excerpt. Text positions 10759–10788, end exclusive, in the original decoded publication. SHA-256: 871a4afc60ceeae06e8010585055188633d616078500c45937092bfe892239c0
Applicability wording · Applicability
(c) Applicability
This AD applies to Bombardier, Inc., Model BD-100-1A10
airplanes, certificated in any category, serial numbers 20003
through 20788 inclusive.
Exact source excerpt. Text positions 10788–10956, end exclusive, in the original decoded publication. SHA-256: c288005320a0f574714864760c9ca616d7f14375a5346ff6516b76dbbee843d7
Subject
(d) Subject
Air Transport Association (ATA) of America Code 27, Flight
controls.
Exact source excerpt. Text positions 10956–11044, end exclusive, in the original decoded publication. SHA-256: 5df668a44f125df3e991e4d0d4055a7abf4e497975e862633d97c2c7cacf4016
Reason
(e) Reason
This AD was prompted by a report of an in-flight event where a
flightcrew observed a SPOILER FAIL message and had difficulty
maintaining roll control of the airplane. The FAA is issuing this AD
to address uncommanded deployment of the multi-function spoiler at
certain positions, which in combination with specific flap positions
and airspeeds, could create an unacceptably high flightcrew workload
in maintaining roll control of the airplane and could possibly lead
to loss of controllability of the airplane.
Exact source excerpt. Text positions 11044–11579, end exclusive, in the original decoded publication. SHA-256: 50b7d6e116c097414f45e58433a08ccd940ba754d199a7588ebe20011b5ddd19
Compliance
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
Exact source excerpt. Text positions 11579–11681, end exclusive, in the original decoded publication. SHA-256: 00fbfa31932483f627d0ce0a11cbd2e35e15d9231842b91ac85623ce533912d3
Airplane Flight Manual (AFM) Revisions
(g) Airplane Flight Manual (AFM) Revisions
Within 30 days after the effective date of this AD: Revise the
Non-Normal Procedures section of the existing AFM to incorporate the
information in Section 05-23, ``Flight Controls,'' of the applicable
AFM specified in figure 1 to paragraph (g) of this AD.
[[Page 35177]]
[GRAPHIC] [TIFF OMITTED] TR09JN20.000
Exact source excerpt. Text positions 11681–12044, end exclusive, in the original decoded publication. SHA-256: a7a4b84db08a29c7095a4deabdfe01db145e844a7319bf9a4ea79ea8f2a8560a
Other FAA AD Provisions
(h) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, New
York ACO Branch, FAA, has the authority to approve AMOCs for this
AD, if requested using the procedures found in 14 CFR 39.19. In
accordance with 14 CFR 39.19, send your request to your principal
inspector or local Flight Standards District Office, as appropriate.
If sending information directly to the manager of the certification
office, send it to ATTN: Program Manager, Continuing Operational
Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before
using any approved AMOC, notify your appropriate principal
inspector, or lacking a principal inspector, the manager of the
local flight standards district office/certificate holding district
office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, New York ACO
Branch, FAA; or Transport Canada Civil Aviation (TCCA); or
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If
approved by the DAO, the approval must include the DAO-authorized
signature.
Exact source excerpt. Text positions 12044–13346, end exclusive, in the original decoded publication. SHA-256: 9178bdf160ecde1dc3059437f019f375db16b4d5dd5fafa092fb5483de3b403e
Related Information
(i) Related Information
(1) Refer to Mandatory Continuing Airworthiness Information
(MCAI) Canadian AD CF-2019-29, dated August 12, 2019, for related
information. This MCAI may be found in the AD docket on the internet
at https://www.regulations.gov by searching for and locating Docket
No. FAA-2019-1076.
(2) For more information about this AD, contact Darren Gassetto,
Aerospace Engineer, Mechanical Systems and Administrative Services
Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7323; fax 516-794-5531; email
[email protected].
Exact source excerpt. Text positions 13346–13956, end exclusive, in the original decoded publication. SHA-256: ff4aa3c1dc2a61ac58758adeedf3fab93b8e794125c20e66ef0fae243f9e1111
Material Incorporated by Reference
(j) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) Bombardier Challenger 300 Airplane Flight Manual,
Publication No. CSP 100-1, Revision 56, dated July 8, 2019.
(ii) Bombardier Challenger 350 Airplane Flight Manual,
Publication No. CH 350 AFM, Revision 22, dated July 8, 2019.
(3) For service information identified in this AD, contact
Bombardier, Inc., 200 C[ocirc]te-Vertu Road West, Dorval,
Qu[eacute]bec H4S 2A3, Canada; North America toll-free telephone 1-
866-538-1247 or direct-dial telephone 1-514-855-2999; email
[email protected]; internet https://www.bombardier.com.
(4) You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200
South 216th St., Des Moines, WA. For information on the availability
of this material at the FAA, call 206-231-3195.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, email [email protected], or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Exact source excerpt. Text positions 13956–15415, end exclusive, in the original decoded publication. SHA-256: fa56d163430fbc7dcc880920601b3b0e40039a7232a695b0ca5b44e629e54527
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2020-11-10 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 009c02693fc8173fae640af43cf1e21f603ff89f36e5be3332c9030cbae0c26e. Source manifest: f24a22d39c87cd4fe9fa44a1a5e309d0ff7207fa0f21e70650d2b4431eeae705.
Official source · 2020-06-09
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 85, Number 111 (Tuesday, June 9, 2020)]
[Rules and Regulations]
[Pages 35175-35177]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-12374]
========================================================================
Rules and Regulations
Federal Register
________________________________________________________________________
This section of the FEDERAL REGISTER contains regulatory documents
having general applicability and legal effect, most of which are keyed
to and codified in the Code of Federal Regulations, which is published
under 50 titles pursuant to 44 U.S.C. 1510.
The Code of Federal Regulations is sold by the Superintendent of Documents.
========================================================================
Federal Register / Vol. 85, No. 111 / Tuesday, June 9, 2020 / Rules
and Regulations
[[Page 35175]]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2019-1076; Product Identifier 2019-NM-173-AD; Amendment
39-19914; AD 2020-11-10]
RIN 2120-AA64
Airworthiness Directives; Bombardier, Inc., Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for
certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was
prompted by a report of an in-flight event where a flightcrew observed
a SPOILER FAIL message and had difficulty maintaining roll control of
the airplane. This AD requires revising the existing airplane flight
manual (AFM) to provide the flightcrew with procedures related to roll
spoiler failures that reduce the flightcrew workload during this type
of failure scenario. The FAA is issuing this AD to address the unsafe
condition on these products.
DATES: This AD is effective July 14, 2020.
The Director of the Federal Register approved the incorporation by
reference of certain publications listed in this AD as of July 14,
2020.
ADDRESSES: For service information identified in this final rule,
contact Bombardier, Inc., 200 C[ocirc]te-Vertu Road West, Dorval,
Qu[eacute]bec H4S 2A3, Canada; North America toll-free telephone 1-866-
538-1247 or direct-dial telephone 1-514-855-2999; email
[email protected]; internet https://www.bombardier.com. You
may view this service information at the FAA, Airworthiness Products
Section, Operational Safety Branch, 2200 South 216th St. Des Moines,
WA. For information on the availability of this material at the FAA,
call 206-231-3195. It is also available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2019-
1076.
Examining the AD Docket
You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2019-
1076; or in person at Docket Operations between 9 a.m. and 5 p.m.,
Monday through Friday, except Federal holidays. The AD docket contains
this final rule, any comments received, and other information. The
address for Docket Operations is U.S. Department of Transportation,
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200
New Jersey Avenue SE, Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Darren Gassetto, Aerospace Engineer,
Mechanical Systems and Administrative Services Section, FAA, New York
ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590;
telephone 516-228-7323; fax 516-794-5531; email [email protected].
SUPPLEMENTARY INFORMATION:
Discussion
Transport Canada Civil Aviation (TCCA), which is the aviation
authority for Canada, has issued Canadian AD CF-2019-29, dated August
12, 2019 (also referred to as the Mandatory Continuing Airworthiness
Information, or ``the MCAI''), to correct an unsafe condition for
certain Bombardier, Inc., Model BD-100-1A10 airplanes. You may examine
the MCAI in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2019-
1076.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 by adding an AD that would apply to certain Bombardier,
Inc., Model BD-100-1A10 airplanes. The NPRM published in the Federal
Register on January 22, 2020 (85 FR 3553). The NPRM was prompted by a
report of an in-flight event where a flightcrew observed a SPOILER FAIL
message and had difficulty maintaining roll control of the airplane.
The NPRM proposed to require revising the existing AFM to provide the
flightcrew with procedures related to roll spoiler failures that reduce
the flightcrew workload during this type of failure scenario. The FAA
is issuing this AD to address uncommanded deployment of the multi-
function spoiler at certain positions, which in combination with
specific flap positions and airspeeds, could create an unacceptably
high flightcrew workload in maintaining roll control of the airplane
and could possibly lead to loss of controllability of the airplane. See
the MCAI for additional background information.
Comments
The FAA gave the public the opportunity to participate in
developing this final rule. The following presents the comment received
on the NPRM and the FAA's response to that comment.
Request To Use the Latest Service Information
Net Jets requested that the FAA use the latest service information.
Net Jets stated that Bombardier has released Challenger 350 Airplane
Flight Manual, Publication No. CH 350 AFM, Revision 24, dated January
15, 2020.
The FAA agrees to clarify. Paragraph (g) of this AD specifies to
revise the Non-Normal Procedures section of the existing AFM to
incorporate the information in Section 05-23, ``Flight Controls,'' of
Bombardier Challenger 350, Airplane Flight Manual, Publication No. CH
350 AFM, Revision 22, dated July 8, 2019 (for the applicable
airplanes). The language in paragraph (g) of this AD is designed to
allow incorporating the specific information in Section 05-23,
regardless of the revision level of the AFM, so long as the language is
identical to the information in Section 05-23, ``Flight Controls,''
Revision 22. The FAA has not changed this AD in this regard.
Conclusion
The FAA reviewed the relevant data, considered the comment
received, and determined that air safety and the public interest
require adopting this final rule as proposed, except for minor
editorial changes. The FAA has determined that these minor changes:
<bullet> Are consistent with the intent that was proposed in the
NPRM for addressing the unsafe condition; and
[[Page 35176]]
<bullet> Do not add any additional burden upon the public than was
already proposed in the NPRM.
Related Service Information Under 1 CFR Part 51
Bombardier has issued Challenger 300 Airplane Flight Manual,
Publication No. CSP 100-1, Revision 56, dated July 8, 2019; and
Challenger 350 Airplane Flight Manual, Publication No. CH 350 AFM,
Revision 22, dated July 8, 2019. This service information describes
non-normal procedures for flight controls. These documents are distinct
since they apply to different airplane serial numbers. This service
information is reasonably available because the interested parties have
access to it through their normal course of business or by the means
identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 577 airplanes of U.S.
registry. The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
Cost per Cost on U.S.
Labor cost Parts cost product operators
----------------------------------------------------------------------------------------------------------------
1 work-hour x $85 per hour = $85............................. $0 $85 $49,045
----------------------------------------------------------------------------------------------------------------
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: ``General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive (AD):
2020-11-10 Bombardier, Inc.: Amendment 39-19914; Docket No. FAA-
2019-1076; Product Identifier 2019-NM-173-AD.
(a) Effective Date
This AD is effective July 14, 2020.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Bombardier, Inc., Model BD-100-1A10
airplanes, certificated in any category, serial numbers 20003
through 20788 inclusive.
(d) Subject
Air Transport Association (ATA) of America Code 27, Flight
controls.
(e) Reason
This AD was prompted by a report of an in-flight event where a
flightcrew observed a SPOILER FAIL message and had difficulty
maintaining roll control of the airplane. The FAA is issuing this AD
to address uncommanded deployment of the multi-function spoiler at
certain positions, which in combination with specific flap positions
and airspeeds, could create an unacceptably high flightcrew workload
in maintaining roll control of the airplane and could possibly lead
to loss of controllability of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Airplane Flight Manual (AFM) Revisions
Within 30 days after the effective date of this AD: Revise the
Non-Normal Procedures section of the existing AFM to incorporate the
information in Section 05-23, ``Flight Controls,'' of the applicable
AFM specified in figure 1 to paragraph (g) of this AD.
[[Page 35177]]
[GRAPHIC] [TIFF OMITTED] TR09JN20.000
(h) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, New
York ACO Branch, FAA, has the authority to approve AMOCs for this
AD, if requested using the procedures found in 14 CFR 39.19. In
accordance with 14 CFR 39.19, send your request to your principal
inspector or local Flight Standards District Office, as appropriate.
If sending information directly to the manager of the certification
office, send it to ATTN: Program Manager, Continuing Operational
Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before
using any approved AMOC, notify your appropriate principal
inspector, or lacking a principal inspector, the manager of the
local flight standards district office/certificate holding district
office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, New York ACO
Branch, FAA; or Transport Canada Civil Aviation (TCCA); or
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If
approved by the DAO, the approval must include the DAO-authorized
signature.
(i) Related Information
(1) Refer to Mandatory Continuing Airworthiness Information
(MCAI) Canadian AD CF-2019-29, dated August 12, 2019, for related
information. This MCAI may be found in the AD docket on the internet
at https://www.regulations.gov by searching for and locating Docket
No. FAA-2019-1076.
(2) For more information about this AD, contact Darren Gassetto,
Aerospace Engineer, Mechanical Systems and Administrative Services
Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7323; fax 516-794-5531; email
[email protected].
(j) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) Bombardier Challenger 300 Airplane Flight Manual,
Publication No. CSP 100-1, Revision 56, dated July 8, 2019.
(ii) Bombardier Challenger 350 Airplane Flight Manual,
Publication No. CH 350 AFM, Revision 22, dated July 8, 2019.
(3) For service information identified in this AD, contact
Bombardier, Inc., 200 C[ocirc]te-Vertu Road West, Dorval,
Qu[eacute]bec H4S 2A3, Canada; North America toll-free telephone 1-
866-538-1247 or direct-dial telephone 1-514-855-2999; email
[email protected]; internet https://www.bombardier.com.
(4) You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200
South 216th St., Des Moines, WA. For information on the availability
of this material at the FAA, call 206-231-3195.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, email [email protected], or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued on May 28, 2020.
Lance T. Gant,
Director, Compliance & Airworthiness Division, Aircraft Certification
Service.
[FR Doc. 2020-12374 Filed 6-8-20; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T02:02:00.491770+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- b7c130f9805c475c504feed46909277bfc405417efaeec92939ed7a1b039168f
- Text SHA-256
- 009c02693fc8173fae640af43cf1e21f603ff89f36e5be3332c9030cbae0c26e
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.