Published 2021-06-01 · Federal Register document 2021-11426
Airworthiness Directives; Bombardier, Inc., Airplanes
Publication summary
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by reports of DC motor pump (DCMP) failures during production flight tests. This AD requires installing a redesigned DCMP electric motor assembly. The FAA is issuing this AD to address the unsafe condition on these products.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:24:08.106391+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2021-9c919420683447c6
- Source row
- results[175]
- Raw source SHA-256
- 9c919420683447c683ad0c877cb886e341c11862be32b47c536a001b1d76dcb5
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 2021-10-26
- Effective date printed in this edition
- 2021-07-06
Read 12 complete recorded clauses
Effective Date
(a) Effective Date
This airworthiness directive (AD) is effective July 6, 2021.
Exact source excerpt. Text positions 8325–8411, end exclusive, in the original decoded publication. SHA-256: 391d28c292c2480b02a5fa61271d6baf04b97d8ebaa8e1b6c8e33d117555b4f1
Affected ADs
(b) Affected ADs
None.
[[Page 29187]]
Exact source excerpt. Text positions 8411–8456, end exclusive, in the original decoded publication. SHA-256: 325d0559462b7a8399655b99e64e94840d976a9b67a371373540f9ec956888f9
Applicability wording · Applicability
(c) Applicability
This AD applies to Bombardier, Inc., Model BD-100-1A10
airplanes, certificated in any category, serial numbers 20003
through 20406 inclusive.
Exact source excerpt. Text positions 8456–8624, end exclusive, in the original decoded publication. SHA-256: 41e3194452bb316872bbcc7a9a58c6de30d912b7c1e690bd453a47dee2c69f0e
Subject
(d) Subject
Air Transport Association (ATA) of America Code 29, Hydraulic
power.
Exact source excerpt. Text positions 8624–8712, end exclusive, in the original decoded publication. SHA-256: 6a3ae9a00e650ac8c733a2f51c715f2d7e16a489566ac286624f5667ddcd6f14
Reason
(e) Reason
This AD was prompted by reports of DC motor pump (DCMP) failures
during production flight tests. These failures caused the electrical
system generators to disconnect due to excessive induced voltage in
the bus, caused by the DCMP overheating at high altitudes. The FAA
is issuing this AD to address failures of the DCMP and electrical
system generators, which could lead to the loss of normal electrical
power on the airplane.
Exact source excerpt. Text positions 8712–9162, end exclusive, in the original decoded publication. SHA-256: 156eb069df91eda98b7cd03b8e32ac8ce39532dc8c5b10e27639a0898a0685e1
Compliance
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
Exact source excerpt. Text positions 9162–9264, end exclusive, in the original decoded publication. SHA-256: 00fbfa31932483f627d0ce0a11cbd2e35e15d9231842b91ac85623ce533912d3
Required Actions
(g) Required Actions
Within 6 months after the effective date of this AD: Install the
redesigned DCMP electric motor assembly, having part number (P/N)
945202-3, in accordance with the Accomplishment Instructions of
Bombardier Service Bulletin 100-29-18, Revision 03, dated December
18, 2014.
Exact source excerpt. Text positions 9264–9567, end exclusive, in the original decoded publication. SHA-256: 4bebc61cc3ede6e422839c64d24f136209163821c103290134bd6b332ffeef96
Parts Installation Prohibition
(h) Parts Installation Prohibition
After accomplishing the installation required by paragraph (g)
of this AD, no person may install a DCMP having P/N MB74F-9/-7 on
any airplane.
Exact source excerpt. Text positions 9567–9753, end exclusive, in the original decoded publication. SHA-256: 75be6223a0f696ab237b4d20bf28a7f22e703a1f1dd18c49924672345ffb5f24
Credit for Previous Actions
(i) Credit for Previous Actions
This paragraph provides credit for actions required by paragraph
(g) of this AD, if those actions were performed before the effective
date of this AD using Bombardier Service Bulletin 100-29-18, dated
July 2, 2013; Bombardier Service Bulletin 100-29-18, Revision 01,
dated January 21, 2014; or Bombardier Service Bulletin 100-29-18,
Revision 02, dated July 18, 2014.
Exact source excerpt. Text positions 9753–10163, end exclusive, in the original decoded publication. SHA-256: 7be02653fb0ae15656c6f5ec4884a6e2d53a5f66306daf539484520d7746a9e4
Other FAA AD Provisions
(j) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, New
York ACO Branch, FAA, has the authority to approve AMOCs for this
AD, if requested using the procedures found in 14 CFR 39.19. In
accordance with 14 CFR 39.19, send your request to your principal
inspector or responsible Flight Standards Office, as appropriate. If
sending information directly to the manager of the certification
office, send it to ATTN: Program Manager, Continuing Operational
Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before
using any approved AMOC, notify your appropriate principal
inspector, or lacking a principal inspector, the manager of the
responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, New York ACO
Branch, FAA; or Transport Canada Civil Aviation (TCCA); or
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If
approved by the DAO, the approval must include the DAO-authorized
signature.
Exact source excerpt. Text positions 10163–11422, end exclusive, in the original decoded publication. SHA-256: 10a500e3f5baba9ef95ce417e07375e58f6ee3e87c5bf92dce13872a76ed000c
Related Information
(k) Related Information
(1) Refer to Mandatory Continuing Airworthiness Information
(MCAI) TCCA AD CF-2020-31, dated September 23, 2020, for related
information. This MCAI may be found in the AD docket on the internet
at https://www.regulations.gov by searching for and locating Docket
No. FAA-2021-0097.
(2) For more information about this AD, contact Steven
Dzierzynski, Aerospace Engineer, Avionics and Electrical Systems
Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue,
Suite 410, Westbury, NY 11590; phone: 516-228-7367; fax: 516-794-
5531; email: [email protected].
(3) Service information identified in this AD that is not
incorporated by reference is available at the addresses specified in
paragraphs (l)(3) and (4) of this AD.
Exact source excerpt. Text positions 11422–12198, end exclusive, in the original decoded publication. SHA-256: de9d01837b06acac0992f4900ff2fafc5c6ec0cf6b450234738eba62234dd55b
Material Incorporated by Reference
(l) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) Bombardier Service Bulletin 100-29-18, Revision 03, dated
December 18, 2014.
(ii) [Reserved]
(3) For service information identified in this AD, contact
Bombardier, Inc., 200 C[ocirc]te-Vertu Road West, Dorval,
Qu[eacute]bec H4S 2A3, Canada; North America toll-free telephone 1-
866-538-1247 or direct-dial telephone 1-514-855-2999; email
[email protected]; internet https://www.bombardier.com.
(4) You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200
South 216th St., Des Moines, WA. For information on the availability
of this material at the FAA, call 206-231-3195.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, email [email protected], or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Exact source excerpt. Text positions 12198–13523, end exclusive, in the original decoded publication. SHA-256: 65a92909cc454a8175e8f429eb7e4936f663d3f61eba290525f95ce5b2cd7771
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 2021-10-26 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 69945addfb8350ee10a0855bd3796469ce08ec459d132cf99c801354f79c9489. Source manifest: 07f952a7dacbda610c0c5847d251d425b96aebf1f3a7e7035fab5887dca4fd1d.
Official source · 2021-06-01
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 86, Number 103 (Tuesday, June 1, 2021)]
[Rules and Regulations]
[Pages 29185-29187]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-11426]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2021-0097; Project Identifier MCAI-2020-01334-T;
Amendment 39-21559; AD 2021-10-26]
RIN 2120-AA64
Airworthiness Directives; Bombardier, Inc., Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for
certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was
prompted by reports of DC motor pump (DCMP) failures during production
flight tests. This AD requires installing a redesigned DCMP electric
motor assembly. The FAA is issuing this AD to address the unsafe
condition on these products.
DATES: This AD is effective July 6, 2021.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of July 6,
2021.
ADDRESSES: For service information identified in this final rule,
contact Bombardier, Inc., 200 C[ocirc]te-Vertu Road West, Dorval,
Qu[eacute]bec H4S 2A3, Canada; North America toll-free telephone 1-866-
538-1247 or direct-dial telephone 1-514-855-2999; email
[email protected]; internet https://www.bombardier.com. You
may view this service information at the FAA, Airworthiness Products
Section, Operational Safety Branch, 2200 South 216th St., Des Moines,
WA. For information on the availability of this material at the FAA,
call 206-231-3195. It is also available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-
0097.
Examining the AD Docket
You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-
0097; or in person at Docket Operations
[[Page 29186]]
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The AD docket contains this final rule, any comments
received, and other information. The address for Docket Operations is
U.S. Department of Transportation, Docket Operations, M-30, West
Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE,
Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Steven Dzierzynski, Aerospace
Engineer, Avionics and Electrical Systems Services Section, FAA, New
York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590;
phone: 516-228-7367; fax: 516-794-5531; email: [email protected].
SUPPLEMENTARY INFORMATION:
Background
Transport Canada Civil Aviation (TCCA), which is the aviation
authority for Canada, has issued TCCA AD CF-2020-31, dated September
23, 2020 (TCCA AD CF-2020-31) (also referred to as the Mandatory
Continuing Airworthiness Information, or the MCAI), to correct an
unsafe condition for certain Bombardier, Inc., Model BD-100-1A10
airplanes. You may examine the MCAI in the AD docket on the internet at
https://www.regulations.gov by searching for and locating Docket No.
FAA-2021-0097.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 by adding an AD that would apply to certain Bombardier,
Inc., Model BD-100-1A10 airplanes. The NPRM published in the Federal
Register on February 24, 2021 (86 FR 11163). The NPRM was prompted by
reports of DCMP failures during production flight tests. The NPRM
proposed to require installing a redesigned DCMP electric motor
assembly. The FAA is issuing this AD to address failures of the DCMP
and electrical system generators, which could lead to the loss of
normal electrical power on the airplane. See the MCAI for additional
background information.
Comments
The FAA gave the public the opportunity to participate in
developing this final rule. The FAA received no comments on the NPRM or
on the determination of the cost to the public.
Conclusion
The FAA reviewed the relevant data and determined that air safety
and the public interest require adopting this final rule as proposed,
except for minor editorial changes. The FAA has determined that these
minor changes:
<bullet> Are consistent with the intent that was proposed in the
NPRM for addressing the unsafe condition; and
<bullet> Do not add any additional burden upon the public than was
already proposed in the NPRM.
Related Service Information Under 1 CFR Part 51
Bombardier has issued Service Bulletin 100-29-18, Revision 03,
dated December 18, 2014. This service information describes procedures
for installing the redesigned DCMP electric motor assembly, having part
number (P/N) 945202-3 (including a wiring modification and a structural
modification). This service information is reasonably available because
the interested parties have access to it through their normal course of
business or by the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 239 airplanes of U.S.
registry. The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
Cost per Cost on U.S.
Labor cost Parts cost product operators
----------------------------------------------------------------------------------------------------------------
68 work-hours x $85 per hour = $5,780........................ $18,964 $24,744 $5,913,816
----------------------------------------------------------------------------------------------------------------
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
2021-10-26 Bombardier, Inc.: Amendment 39-21559; Docket No. FAA-
2021-0097; Project Identifier MCAI-2020-01334-T.
(a) Effective Date
This airworthiness directive (AD) is effective July 6, 2021.
(b) Affected ADs
None.
[[Page 29187]]
(c) Applicability
This AD applies to Bombardier, Inc., Model BD-100-1A10
airplanes, certificated in any category, serial numbers 20003
through 20406 inclusive.
(d) Subject
Air Transport Association (ATA) of America Code 29, Hydraulic
power.
(e) Reason
This AD was prompted by reports of DC motor pump (DCMP) failures
during production flight tests. These failures caused the electrical
system generators to disconnect due to excessive induced voltage in
the bus, caused by the DCMP overheating at high altitudes. The FAA
is issuing this AD to address failures of the DCMP and electrical
system generators, which could lead to the loss of normal electrical
power on the airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Required Actions
Within 6 months after the effective date of this AD: Install the
redesigned DCMP electric motor assembly, having part number (P/N)
945202-3, in accordance with the Accomplishment Instructions of
Bombardier Service Bulletin 100-29-18, Revision 03, dated December
18, 2014.
(h) Parts Installation Prohibition
After accomplishing the installation required by paragraph (g)
of this AD, no person may install a DCMP having P/N MB74F-9/-7 on
any airplane.
(i) Credit for Previous Actions
This paragraph provides credit for actions required by paragraph
(g) of this AD, if those actions were performed before the effective
date of this AD using Bombardier Service Bulletin 100-29-18, dated
July 2, 2013; Bombardier Service Bulletin 100-29-18, Revision 01,
dated January 21, 2014; or Bombardier Service Bulletin 100-29-18,
Revision 02, dated July 18, 2014.
(j) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, New
York ACO Branch, FAA, has the authority to approve AMOCs for this
AD, if requested using the procedures found in 14 CFR 39.19. In
accordance with 14 CFR 39.19, send your request to your principal
inspector or responsible Flight Standards Office, as appropriate. If
sending information directly to the manager of the certification
office, send it to ATTN: Program Manager, Continuing Operational
Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before
using any approved AMOC, notify your appropriate principal
inspector, or lacking a principal inspector, the manager of the
responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, New York ACO
Branch, FAA; or Transport Canada Civil Aviation (TCCA); or
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If
approved by the DAO, the approval must include the DAO-authorized
signature.
(k) Related Information
(1) Refer to Mandatory Continuing Airworthiness Information
(MCAI) TCCA AD CF-2020-31, dated September 23, 2020, for related
information. This MCAI may be found in the AD docket on the internet
at https://www.regulations.gov by searching for and locating Docket
No. FAA-2021-0097.
(2) For more information about this AD, contact Steven
Dzierzynski, Aerospace Engineer, Avionics and Electrical Systems
Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue,
Suite 410, Westbury, NY 11590; phone: 516-228-7367; fax: 516-794-
5531; email: [email protected].
(3) Service information identified in this AD that is not
incorporated by reference is available at the addresses specified in
paragraphs (l)(3) and (4) of this AD.
(l) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) Bombardier Service Bulletin 100-29-18, Revision 03, dated
December 18, 2014.
(ii) [Reserved]
(3) For service information identified in this AD, contact
Bombardier, Inc., 200 C[ocirc]te-Vertu Road West, Dorval,
Qu[eacute]bec H4S 2A3, Canada; North America toll-free telephone 1-
866-538-1247 or direct-dial telephone 1-514-855-2999; email
[email protected]; internet https://www.bombardier.com.
(4) You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200
South 216th St., Des Moines, WA. For information on the availability
of this material at the FAA, call 206-231-3195.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, email [email protected], or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued on May 7, 2021.
Gaetano A. Sciortino,
Deputy Director for Strategic Initiatives, Compliance & Airworthiness
Division, Aircraft Certification Service.
[FR Doc. 2021-11426 Filed 5-28-21; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T01:51:10.921591+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- b51deb8d49b05e1831211b68d0ec7c343e3f0990c06a7c715f0825dc3ca10843
- Text SHA-256
- 69945addfb8350ee10a0855bd3796469ce08ec459d132cf99c801354f79c9489
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.