Airworthiness Directives; Airbus Helicopters Deutschland GmbH

[Federal Register Volume 86, Number 104 (Wednesday, June 2, 2021)]
[Rules and Regulations]
[Pages 29483-29486]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-11444]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2021-0135; Project Identifier MCAI-2020-01044-R; 
Amendment 39-21554; AD 2021-10-21]
RIN 2120-AA64


Airworthiness Directives; Airbus Helicopters Deutschland GmbH

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2019-07-07 
for various Airbus Helicopters Deutschland GmbH (Airbus Helicopters) 
Model MBB-BK117 and Model BO-105 helicopters. AD 2019-07-07 required 
removing certain part numbered swashplate bellows (bellows) from 
service, cleaning and inspecting certain parts, and depending on the 
inspection results removing certain parts from service, applying 
torque, and repetitively inspecting the swashplate assembly 
(swashplate). This AD retains certain requirements of AD 2019-07-07, 
expands the installation prohibition, adds additional inspections, and 
updates the applicable service information. The FAA is issuing this AD 
to address an unsafe condition on these products.

DATES: This AD is effective July 7, 2021.
    The Director of the Federal Register approved the incorporation by 
reference of certain publications listed in this AD as of July 7, 2021.

ADDRESSES: For service information identified in this final rule, 
contact Airbus Helicopters, 2701 N Forum Drive, Grand Prairie, TX 
75052; telephone (972) 641-0000 or (800) 232-0323; fax (972) 641-3775; 
or at https://www.airbus.com/helicopters/services/technical-support.html. You may view this service information at the FAA, Office 
of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 
6N-321, Fort Worth, TX 76177. For more information on the availability 
of this material at the FAA, call (817) 222-5110. It is also available 
on the internet at https://www.regulations.gov by searching for and 
locating Docket No. FAA-2021-0135.

Examining the AD Docket

    You may examine the AD docket on the internet at https://www.regulations.gov in Docket No. FAA-2021-0135; or in person at Docket 
Operations between 9 a.m. and 5 p.m., Monday through Friday, except 
Federal holidays. The AD docket contains this AD, the European Aviation 
Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, 
any service information that is incorporated by reference, any comments 
received, and other information. The street address for Docket 
Operations is U.S. Department of Transportation, Docket Operations, M-
30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue 
SE, Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Matt Fuller, AD Program Manager, 
Operational Safety Branch, Airworthiness Products Section, General 
Aviation & Rotorcraft Unit,

[[Page 29484]]

FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone (817) 222-
5110; email [email protected].

SUPPLEMENTARY INFORMATION:

Background

    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 
CFR part 39 to supersede AD 2019-07-07, Amendment 39-19618 (84 FR 
16394, April 19, 2019) (AD 2019-07-07). AD 2019-07-07 applied to Airbus 
Helicopters Model BO-105A, BO-105C, BO-105S, BO105LS A-3, MBB-BK 117A-
1, MBB-BK 117A-3, MBB-BK 117A-4, MBB-BK 117B-1, MBB-BK 117B-2, MBB-BK 
117C-1, MBB-BK 117C-2, and MBB-BK 117D-2 helicopters. The NPRM 
published in the Federal Register on March 10, 2021 (86 FR 13665). The 
NPRM proposed to require, within 50 hours time-in-service, removing the 
affected bellows from the swashplate, cleaning and inspecting the 
support tube for scratches, and depending on the inspection results 
reworking the cylindrical area. The NPRM proposed to require inspecting 
the clamp for corrosion, damage, and incorrect installation, and 
depending on the inspection results, removing the clamp from service or 
reinstalling the clamp correctly and applying a torque. The NPRM also 
proposed to require inspecting each ball bearing for corrosion, and 
depending on the inspection results, removing each ball bearing from 
service. The NPRM proposed to require inspecting the deflection ring 
for foreign objects by removing the lockwire, screws, and the outer 
deflection ring and removing any foreign objects.
    Additionally, the NPRM proposed to require, within 400 hours TIS, 
inspecting the swashplate for foreign objects and excessive bearing 
rolling friction. Finally, the NPRM proposed to prohibit installing a 
bellows P/N 105-10113.05, P/N 4619305044, P/N 4638305043, or P/N 
B623M20X2240, or a gearbox with a bellows P/N 105-10113.05, P/N 
4619305044, or P/N 4638305043 on any helicopter.
    EASA AD 2016-0142, dated July 19, 2016, which was revised to EASA 
AD 2016-0142R1, dated April 12, 2018, issued by EASA, which is the 
Technical Agent for the Member States of the European Union, to correct 
an unsafe condition for Model MBB-BK117 A-1, MBB-BK117 A-3, MBB-BK117 
A-4, MBB-BK117 B-1, MBB-BK117 B-2, MBB-BK117 C-1, MBB-BK117 C-2, and 
MBB-BK117 C-2e helicopters, all serial numbers (S/Ns), and Model BO105 
A, BO105 C, BO105 D, BO105 S, and BO105 LS A-3 helicopters, all 
variants, all S/Ns. EASA advises of several reports of a lower clamp 
found missing from the bellows and damaging the swashplate bearing ring 
before becoming detached. EASA states that an investigation showed that 
over-torqueing can damage the clamp, which may have caused the clamp to 
become loose and detach. EASA further advises that this condition, if 
not addressed, could result a detached clamp, which could damage the 
swashplate and pitch link or strike the tail rotor, resulting in loss 
of control of the helicopter.
    Accordingly, EASA AD 2016-0142R1 requires removing the bellows, and 
performing modifications, inspections, and corrective actions in 
accordance with the applicable service information for your helicopter. 
EASA AD 2016-0142R1 also prohibits the installation of certain part-
numbered bellows or any gearbox with certain part-numbered bellows on 
any helicopter.

Discussion of Final Airworthiness Directive

Comments

    The FAA received no comments on the NPRM or the determination of 
the costs.

Conclusion

    These helicopters have been approved by EASA and are approved for 
operation in the United States. Pursuant to the FAA's bilateral 
agreement with the European Union, EASA has notified the FAA of the 
unsafe condition described in its AD. The FAA reviewed the relevant 
data and determined that air safety requires adopting this AD as 
proposed. Accordingly, the FAA is issuing this AD to address the unsafe 
condition on these helicopters.

Related Service Information Under 1 CFR Part 51

    The FAA reviewed Airbus Helicopters Alert Service Bulletin ASB 
(ASB) BO105-40A-107 for Model BO105C-series, D-series and S-series 
helicopters; ASB BO105 LS-40A-12 for Model BO-105LS A-3 helicopters; 
ASB MBB-BK117-40A-115 for Model MBB-BK 117 A-1, MBB-BK 117 A-3, MBB-BK 
117 A-4, MBB-BK 117 B-1, MBB-BK 117 B-2, and MBB-BK 117 C-1 
helicopters; and ASB MBB-BK117 C-2-62A-007 for Model MBB-BK 117 C-2 
helicopters, each Revision 5 and dated July 25, 2017. The FAA also 
reviewed Airbus Helicopters ASB MBB-BK117 D-2-62A-003, Revision 3, 
dated July 25, 2017, for Model MBB-BK 117 D-2 helicopters. This service 
information specifies removing the bellows and repetitively inspecting 
the swashplate.
    This service information is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in the ADDRESSES section.

Differences Between This AD and the EASA AD

    The EASA AD requires compliance within different time intervals for 
some actions than what this AD requires. The EASA AD allows a non-
cumulative tolerance of 10 percent that may be applied to the 
compliance times, and this AD does not. This AD applies to Model MBB-BK 
117D-2 helicopters while the EASA AD does not. The EASA AD applies to 
Model BO-105D helicopters, while this AD does not. The EASA AD requires 
reporting corrosion to Airbus Helicopters while this AD does not.

Costs of Compliance

    The FAA estimates that this AD affects 211 helicopters of U.S. 
Registry. Labor rates are estimated at $85 per work-hour. Based on 
these numbers, the FAA estimates that operators may incur the following 
costs in order to comply with this AD.
    Inspecting the swashplate assembly takes about 3 work-hours for an 
estimated cost of $255 per helicopter and $53,805 for the U.S. fleet 
per inspection cycle.
    Repairing a scratched support tube takes about 3 work-hours for an 
estimated cost of $255 per helicopter.
    Replacing a corroded or damaged clamp takes about 2 work-hours and 
parts cost about $8 for a cost of $178 per helicopter.
    Replacing corroded ball bearings takes about 4 work-hours and parts 
cost about $3,000 for a cost of $3,340 per helicopter.
    Removing foreign objects from the outer deflection ring takes about 
2 work-hours for an estimated cost of $170 per helicopter.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, Section 106, describes the 
authority of the FAA Administrator. Subtitle VII, Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and

[[Page 29485]]

procedures the Administrator finds necessary for safety in air 
commerce. This regulation is within the scope of that authority because 
it addresses an unsafe condition that is likely to exist or develop on 
products identified in this rulemaking action.

Regulatory Findings

    The FAA has determined that this AD will not have federalism 
implications under Executive Order 13132. This AD will not have a 
substantial direct effect on the States, on the relationship between 
the national government and the States, or on the distribution of power 
and responsibilities among the various levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by:
0
a. Removing Airworthiness Directive (AD) 2019-07-07, Amendment 39-19618 
(84 FR 16394, April 19, 2019); and
0
b. Adding the following new AD:

2021-10-21 Airbus Helicopters Deutschland GmbH: Amendment 39-21554; 
Docket No. FAA-2021-0135; Project Identifier MCAI-2020-01044-R.

(a) Effective Date

    This airworthiness directive (AD) is effective July 7, 2021.

(b) Affected ADs

    This AD replaces AD 2019-07-07, Amendment 39-19618 (84 FR 16394, 
April 19, 2019) (2019-07-07).

(c) Applicability

    This AD applies to Airbus Helicopters Deutschland GmbH Model BO-
105A, BO-105C, BO-105S, BO105LS A-3, MBB-BK 117A-1, MBB-BK 117A-3, 
MBB-BK 117A-4, MBB-BK 117B-1, MBB-BK 117B-2, MBB-BK 117C-1, MBB-BK 
117C-2, and MBB-BK 117D-2 helicopters, certificated in any category.

(d) Subject

    Joint Aircraft Service Component (JASC) Code: 6200, Main Rotor 
System.

(e) Unsafe Condition

    This AD was prompted by a lower clamp found missing from the 
swashplate bellows (bellows) and damaging the swashplate bearing 
ring before becoming detached. The FAA is issuing this AD to prevent 
a loose bellows clamp. The unsafe condition, if not addressed, could 
result in loss of the bellows, contact of the bellows with the main 
rotor blades, main rotor mast, and tail rotor, and subsequent loss 
of helicopter control.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Required Actions

    (1) Within 50 hours time-in-service (TIS) after the effective 
date of this AD:
    (i) Remove from service bellows part number (P/N) 105-10113.05, 
P/N 4638305043, P/N 4619305044, or P/N B623M20X2240 from the 
swashplate assembly (swashplate).
    (ii) Clean and inspect the support tube for scratches as 
depicted in Detail 11, Figure 6 of Airbus Helicopters Alert Service 
Bulletin ASB (ASB) BO105-40A-107 (ASB BO105-40A-107); or Detail 11, 
Figure 5 of ASB BO105 LS-40A-12 (ASB BO105 LS 40A-12); or Detail 11, 
Figure 5 of ASB MBB-BK117-40A-115, (ASB MBB-BK117-40A-115); or 
Detail 11, Figure 5 of ASB MBB-BK117 C-2-62A-007 (ASB MBB-BK117 C-2-
62A-007), each Revision 5 and dated July 25, 2017; or Detail 11, 
Figure 5 of ASB MBB-BK117 D-2-62A-003, Revision 3, dated July 25, 
2017 (ASB MBB-BK117 D-2-62A-003); as applicable to your model 
helicopter. If there are scratches on the support tube, before 
further flight, rework the cylindrical area to a max depth of 0.1 mm 
with a polishing cloth #400 or equivalent polishing cloth. The 
reworked area must not exceed 10 mm in width or 3 cm\2\ in area, the 
minimum separation between any adjacent reworked areas must be 30 
mm, and total reworked areas must not exceed 10 percent of the 
cylindrical area.
    (iii) Inspect the clamp for corrosion and correct installation.

    Note 1 to paragraph (g)(1)(iii): A figure of the clamp is 
depicted in Detail 9, Figure 6 of ASB BO105-40A-107; or Detail 9, 
Figure 5 of ASB BO105 LS-40A-12, ASB MBB-BK117-40A-115, or ASB MBB-
BK117 C-2-62A-007; or Detail 9, Figure 5 of ASB MBB-BK117 D-2-62A-
003; as applicable to your model helicopter.

    (A) If there is corrosion on the clamp, before further flight 
remove the clamp from service.
    (B) If the clamp is incorrectly installed, before further flight 
install the clamp correctly on the shield as depicted in Detail 10, 
Figure 6 of ASB BO105-40A-107; or Detail 10, Figure 5 of ASB BO105 
LS-40A-12, ASB MBB-BK117-40A-115, or ASB MBB-BK117 C-2-62A-007; or 
Detail 10, Figure 5 of ASB MBB-BK117 D-2-62A-003; as applicable to 
your model helicopter.
    (C) Apply a torque between 0.5 Nm and 0.7 Nm to the screw and 
install lockwire as depicted in Detail 8, Figure 6 of ASB BO105-40A-
107; or Detail 8, Figure 5 of ASB BO105 LS-40A-12, ASB MBB-BK117-
40A-115, or ASB MBB-BK117 C-2-62A-007; or Detail 8, Figure 5 of ASB 
MBB-BK117 D-2-62A-003; as applicable to your model helicopter.
    (iv) Inspect each ball bearing for corrosion. If there is 
corrosion on any ball bearing, before further flight, remove the 
ball bearing from service.
    (v) Inspect the area under the deflection ring for foreign 
objects by removing the lock wire, removing the screws, and removing 
the outer deflection ring. If there are any foreign objects, remove 
the foreign objects with a lint-free cloth.
    (2) Within 400 hours TIS after the effective date of this AD, 
after complying with the actions in paragraph (g)(1) of this AD, and 
thereafter at intervals not to exceed 400 hours TIS, inspect the 
swashplate by following the Accomplishment Instructions, paragraph 
3.B.4 of ASB BO105-40A-107; or paragraph 3.B.3 of ASB BO105 LS-40A-
12, ASB MBB-BK117-40A-115, ASB MBB-BK117 C-2-62A-007, or ASB MBB-
BK117 D-2-62A-003; as applicable to your model helicopter.
    (3) After May 24, 2019 (the effective date of AD 2019-07-07), do 
not install a bellows P/N 105-10113.05, P/N 4619305044, or P/N 
4638305043, or a gearbox with a bellows P/N 105-10113.05, P/N 
4619305044, or P/N 4638305043 on any helicopter.
    (4) As of the effective date of this AD, do not install a 
bellows P/N B623M20X2240 on any helicopter.

(h) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, International Validation Branch, FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the manager of the International Validation Branch, send 
it to the attention of the person identified in paragraph (i)(1) of 
this AD. Information may be emailed to: [email protected].
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the local flight standards district office/certificate holding 
district office.

(i) Related Information

    (1) For more information about this AD, contact Matt Fuller, AD 
Program Manager, Operational Safety Branch, Airworthiness Products 
Section, General Aviation & Rotorcraft Unit, FAA, 10101 Hillwood 
Pkwy., Fort Worth, TX 76177; telephone (817) 222-5110; email [email protected].

[[Page 29486]]

    (2) The subject of this AD is addressed in European Aviation 
Safety Agency (now European Union Aviation Safety Agency) (EASA) AD 
2016-0142R1, dated April 12, 2018. You may view the EASA AD on the 
internet at https://www.regulations.gov in Docket No. FAA-2021-0135.

(j) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference of the service information listed in this 
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless the AD specifies otherwise.
    (i) Airbus Helicopters Alert Service Bulletin ASB (ASB) BO105-
40A-107, Revision 5, dated July 25, 2017.
    (ii) Airbus Helicopters ASB BO105 LS-40A-12, Revision 5, dated 
July 25, 2017.
    (iii) Airbus Helicopters ASB MBB-BK117-40A-115, Revision 5, 
dated July 25, 2017.
    (iv) Airbus Helicopters ASB MBB-BK117 C-2-62A-007, Revision 5, 
dated July 25, 2017.
    (v) Airbus Helicopters ASB MBB-BK117 D-2-62A-003, Revision 3, 
dated July 25, 2017.
    (3) For service information identified in this AD, contact 
Airbus Helicopters, 2701 N Forum Drive, Grand Prairie, TX 75052; 
telephone (972) 641-0000 or (800) 232-0323; fax (972) 641-3775; or 
at https://www.airbus.com/helicopters/services/technical-support.html.
    (4) You may view this service information at the FAA, Office of 
the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 
6N-321, Fort Worth, TX 76177. For information on the availability of 
this material at the FAA, call (817) 222-5110.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, email [email protected], or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on Issued on May 5, 2021.
Lance T. Gant,
Director, Compliance & Airworthiness Division, Aircraft Certification 
Service.
[FR Doc. 2021-11444 Filed 6-1-21; 8:45 am]
BILLING CODE 4910-13-P

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T01:51:06.782633+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256

895b6cc21af20cb4bac8868df83bbcc69ea151962f52b220d9768c325d6504d4

Text SHA-256

c8459cea0e72ea929c50d14aa1ddca81a546e8c15b44e8ef6944b073ed0c0285