Airworthiness Directives; Airbus SAS Airplanes; Correction

[Federal Register Volume 88, Number 150 (Monday, August 7, 2023)]
[Rules and Regulations]
[Pages 52024-52026]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-16884]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2023-0927; Project Identifier MCAI-2023-00013-T; 
Amendment 39-22461; AD 2023-12-03]
RIN 2120-AA64


Airworthiness Directives; Airbus SAS Airplanes; Correction

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: The FAA is correcting an airworthiness directive (AD) that was 
published in the Federal Register. That AD applies to certain Airbus 
SAS Model A350-941 and -1041 airplanes. As published, a European Union 
Aviation Safety Agency (EASA) AD number specified in the regulatory 
text is incorrect. This document corrects that error. In all other 
respects, the original document remains the same.

DATES: This correction is effective August 7, 2023. The effective date 
of AD 2023-12-03 remains August 7, 2023.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of August 7, 
2023 (88 FR 42598, July 3, 2023).

ADDRESSES: 
    AD Docket: You may examine the AD docket at regulations.gov under 
Docket No. FAA-2023-0927; or in person at Docket Operations between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD 
docket contains this final rule; correction, the mandatory continuing 
airworthiness information (MCAI), any comments received, and other 
information. The address for Docket Operations is U.S. Department of 
Transportation, Docket Operations, M-30, West Building Ground Floor, 
Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

[[Page 52025]]

    Material Incorporated by Reference:
    <bullet> For material incorporated by reference in this AD, contact 
EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 
8999 000; email [email protected]; website easa.europa.eu. You may 
find this IBR material on the EASA website at ad.easa.europa.eu.
    <bullet> You may view this material at the FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., Des 
Moines, WA. For information on the availability of this material at the 
FAA, call 206-231-3195. It is also available in the AD docket at 
regulations.gov under Docket No. FAA-2023-0927.

FOR FURTHER INFORMATION CONTACT: Dat Le, Aviation Safety Engineer, FAA, 
1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-
7317; email [email protected].

SUPPLEMENTARY INFORMATION: 

Background

    AD 2023-12-03, Amendment 39-22461 (88 FR 42598, July 3, 2023) (AD 
2023-12-03), requires revising the existing maintenance or inspection 
program, as applicable, to incorporate new or more restrictive 
airworthiness limitations for airplane structures and safe life limits. 
That AD applies to certain Airbus SAS Model A350-941 and -1041 
airplanes.

Need for the Correction

    As published, paragraph (i) in the regulatory text of AD 2023-12-03 
is incorrect. Paragraph (i) of AD 2023-12-03 refers to ``EASA AD 2023-
0017.'' The correct reference is ``EASA AD 2023-0004.''

Related Service Information Under 1 CFR Part 51

    EASA AD 2023-0004, dated January 6, 2023, describes new or more 
restrictive airworthiness limitations for airplane structures and safe 
life limits. This material is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in the ADDRESSES section.

Correction of Publication

    This document corrects an error and correctly adds the AD as an 
amendment to 14 CFR 39.13. Although no other part of the preamble or 
regulatory information has been corrected, the FAA is publishing the 
entire rule in the Federal Register.
    The effective date of this AD remains August 7, 2023.
    Since this action only corrects an EASA AD reference, it has no 
adverse economic impact and imposes no additional burden on any person. 
Therefore, the FAA has determined that notice and public procedures are 
unnecessary.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, pursuant to the authority delegated to me by the 
Administrator, the FAA amends part 39 of the Federal Aviation 
Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Corrected]

0
2. The FAA corrects Sec.  39.13 by correcting the airworthiness 
directive published at 88 FR 42598 (July 3, 2023) to read:

2023-12-03 Airbus SAS: Amendment 39-22461; Docket No. FAA-2023-0927; 
Project Identifier MCAI-2023-00013-T.

(a) Effective Date

    This airworthiness directive (AD) is effective August 7, 2023.

(b) Affected ADs

    This AD affects AD 2023-04-05, Amendment 39-22352 (88 FR 13668, 
March 6, 2023) (AD 2023-04-05).

(c) Applicability

    This AD applies to Airbus SAS Model A350-941 and -1041 
airplanes, certificated in any category, with an original 
airworthiness certificate or original export certificate of 
airworthiness issued on or before November 1, 2022.

(d) Subject

    Air Transport Association (ATA) of America Code: 05, Time 
Limits/Maintenance Checks.

(e) Unsafe Condition

    This AD was prompted by a determination that new or more 
restrictive airworthiness limitations are necessary. The FAA is 
issuing this AD to address reduced structural integrity of the 
airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, European Union Aviation Safety Agency (EASA) AD 
2023-0004, dated January 6, 2023 (EASA AD 2023-0004).

(h) Exceptions to EASA AD 2023-0004

    (1) This AD does not adopt the requirements specified in 
paragraphs (1) and (2) of EASA AD 2023-0004.
    (2) Paragraph (3) of EASA AD 2023-0004 specifies revising ``the 
approved AMP'' within 12 months after its effective date, but this 
AD requires revising the existing maintenance or inspection program, 
as applicable, within 90 days after the effective date of this AD.
    (3) The initial compliance time for doing the tasks specified in 
paragraph (3) of EASA 2023-0004 is on or before the applicable 
``associated thresholds'' as incorporated by the requirements of 
paragraph (3) of EASA AD 2023-0004, or within 90 days after the 
effective date of this AD, whichever occurs later.
    (4) This AD does not adopt the provisions specified in paragraph 
(4) of EASA AD 2023-0004.
    (5) This AD does not adopt the ``Remarks'' section of EASA AD 
2023-0004.

(i) Provisions for Alternative Actions and Intervals

    After the existing maintenance or inspection program has been 
revised as required by paragraph (g) of this AD, no alternative 
actions (e.g., inspections) and intervals are allowed unless they 
are approved as specified in the provisions of the ``Ref. 
Publications'' section of EASA AD 2023-0004.

(j) Terminating Action for AD 2023-04-05

    Accomplishing the actions required by this AD terminates the 
corresponding requirements of AD 2023-04-05, for the tasks 
identified in the service information referenced in EASA AD 2023-
0004 only.

(k) Additional AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International Validation Branch, FAA, has the authority to approve 
AMOCs for this AD, if requested using the procedures found in 14 CFR 
39.19. In accordance with 14 CFR 39.19, send your request to your 
principal inspector or responsible Flight Standards Office, as 
appropriate. If sending information directly to the International 
Validation Branch, send it to the attention of the person identified 
in paragraph (l) of this AD. Information may be emailed to: [email protected]. Before using any approved AMOC, notify your 
appropriate principal inspector, or lacking a principal inspector, 
the manager of the responsible Flight Standards Office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, International 
Validation Branch, FAA; or EASA; or Airbus SAS's EASA Design 
Organization Approval (DOA). If approved by the DOA, the approval 
must include the DOA-authorized signature.

[[Page 52026]]

(l) Additional Information

    For more information about this AD, contact Dat Le, Aviation 
Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 
11590; telephone 516-228-7317; email [email protected].

(m) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (3) The following service information was approved for IBR on 
August 7, 2023 (88 FR 42598, July 3, 2023).
    (i) European Union Aviation Safety Agency (EASA) AD 2023-0004, 
dated January 6, 2023.
    (ii) [Reserved]
    (4) For EASA AD 2023-0004, contact EASA, Konrad-Adenauer-Ufer 3, 
50668 Cologne, Germany; telephone +49 221 8999 000; email 
[email protected]; website easa.europa.eu. You may find this EASA 
AD on the EASA website at ad.easa.europa.eu.
    (5) You may view this service information at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 
South 216th St., Des Moines, WA. For information on the availability 
of this material at the FAA, call 206-231-3195.
    (6) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, email [email protected], or go to www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on August 1, 2023.
Victor Wicklund,
Deputy Director, Compliance & Airworthiness Division, Aircraft 
Certification Service.
[FR Doc. 2023-16884 Filed 8-3-23; 11:15 am]
BILLING CODE 4910-13-P

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T01:33:42.716617+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256

4457893a3190104a82cbe07ea07dd49e06b83bc0e02a4cbf14dac70ab7340d56

Text SHA-256

fd876721bce958dfbd0afe1b324b9da623a67a1fe2ef285712b82afe96edccfd