Published 2024-09-18 · Federal Register document 2024-21180
Airworthiness Directives; Bombardier, Inc. Airplanes
Publication summary
The FAA is superseding Airworthiness Directive (AD) 2009-25- 13, which applied to certain Bombardier, Inc., Model BD-100-1A10 (Challenger 300) airplanes. AD 2009-25-13 required the deactivation of the left-hand (LH) baggage bay heater mat. Since the FAA issued AD 2009-25-13, Bombardier developed a new design solution for the potential uncontrolled heating of the baggage bay sidewall heater mat. This AD retains the requirements of AD 2009-25-13 and requires modifying the baggage bay sidewall interior panel, heater mat, and water tank heater installation, and doing functional testing. Upon the completion of the new actions, the retained requirements of AD 2009-25- 13 will terminate. This AD also revises the applicability. The FAA is issuing this AD to address the unsafe condition on these products.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:24:17.530091+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_2024-766a4e72ab891edd
- Source row
- results[194]
- Raw source SHA-256
- 766a4e72ab891edde7194caaae181bc9ea3fd0d54e65313e290f97067e3b7c5a
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 2024-16-04
- Effective date printed in this edition
- 2024-10-23
Read 14 complete recorded clauses
Effective Date
(a) Effective Date
This airworthiness directive (AD) is effective October 23, 2024.
Exact source excerpt. Text positions 11073–11163, end exclusive, in the original decoded publication. SHA-256: dd935b2290f65c8d7c85ab7aafa65e59c7b72aefb6533f0141a3474dbe28b2f6
Affected ADs
(b) Affected ADs
This AD replaces AD 2009-25-13, Amendment 39-16133 (74 FR 65401,
December 10, 2009) (AD 2009-25-13).
Exact source excerpt. Text positions 11163–11288, end exclusive, in the original decoded publication. SHA-256: cf429446ac3894890e051f7b653324f363ba0ed68cbc7f4c7db7e628a7f26764
Applicability wording · Applicability
(c) Applicability
This AD applies to Bombardier, Inc., Model BD-100-1A10
airplanes, certificated in any category, serial numbers 20003
through 20364 inclusive, 20366, 20367, 20369, and 20372.
Exact source excerpt. Text positions 11288–11488, end exclusive, in the original decoded publication. SHA-256: 6682547d98b0533ecd68b441c91d315f2a811345df8a030b0f604cb05ea41ffe
Subject
(d) Subject
Air Transport Association (ATA) of America Code 25, Equipment/
Furnishings.
Exact source excerpt. Text positions 11488–11582, end exclusive, in the original decoded publication. SHA-256: 1ffe24c6c793b9c0f0b362fce1932ad96c9dea87b917be982738f710e408a2e2
Reason
(e) Reason
This AD was prompted by reports of the baggage bay sidewall
heater mat malfunctioning and by the development of a new design
solution for the potential uncontrolled heating of the heater mats.
The FAA is issuing this AD to address malfunctioning of a baggage
bay sidewall heater mat. The unsafe condition, if not addressed,
could result in a fire in the baggage bay.
Exact source excerpt. Text positions 11582–11971, end exclusive, in the original decoded publication. SHA-256: 3164c7caf451a83d0b7cd4f51deaf74ca35208872d2a6597a94135521b06d5a6
Compliance
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
Exact source excerpt. Text positions 11971–12073, end exclusive, in the original decoded publication. SHA-256: 00fbfa31932483f627d0ce0a11cbd2e35e15d9231842b91ac85623ce533912d3
Retained Actions, With No Changes
(g) Retained Actions, With No Changes
This paragraph restates the requirements of paragraph (g) of AD
2009-25-13, with no changes. Within 100 flight hours after December
28, 2009 (the effective date of AD 2009-25-13), deactivate the left-
hand (LH) baggage bay sidewall heater having part number (P/N) 3436-
06-1/0, in accordance with Bombardier Service Bulletin A100-25-30,
dated July 20, 2009.
Exact source excerpt. Text positions 12073–12478, end exclusive, in the original decoded publication. SHA-256: 274f9d8089159b7342d0b2c8ca17f2221c5ee9d2be8c690769bae331dbb7e095
New Requirement of This AD: Modification
(h) New Requirement of This AD: Modification
Within 36 months after the effective date of this AD, do the
applicable actions specified in paragraphs (h)(1) through (7) of
this AD, in accordance with paragraphs 2.B. through 2.E. of the
Accomplishment Instructions of Bombardier Service Bulletin 100-25-
35, Revision 02, dated January 11, 2016.
(1) Remove the baggage bay sidewall heater mat part number (P/N)
3436-06-1/0 from the LH sidewall panel.
(2) Modify the LH baggage bay sidewall interior panel and heater
mat.
(3) Modify the wiring of the LH and right-hand (RH) baggage bay
sidewall heater mats.
(4) Reidentify the LH baggage bay sidewall heater mat as P/N
3436-07.
(5) For airplanes having serial numbers (S/N) 20124, 20125,
20128, 20134, 20139, 20143, 20146, and 20148 to 20215 inclusive:
install LH baggage bay sidewall interior panel blind insert.
(6) For airplanes having S/N 20003 to 20259 inclusive: install
LH and RH heater pictogram.
(7) Modify the water tank heater installation.
Exact source excerpt. Text positions 12478–13520, end exclusive, in the original decoded publication. SHA-256: 04152b1be533ea3240c6d1ec9fbb9ef7ed1f82278176f58a27867d37d7de7c6f
New Requirement of This AD: Functional Test
(i) New Requirement of This AD: Functional Test
Before further flight after completing paragraph (h) of this AD,
perform the functional tests, in accordance with paragraph 2.F. of
the Accomplishment Instructions of Bombardier Service Bulletin 100-
25-35, Revision 02, dated January 11, 2016.
Exact source excerpt. Text positions 13520–13820, end exclusive, in the original decoded publication. SHA-256: d6e03e7f6431d94f6cc7f8c52783ab1168521ec8d3ab7b8f3de13d1818f2b363
Terminating Action for Heater Mat Deactivation
(j) Terminating Action for Heater Mat Deactivation
Modifying and testing an airplane as required by paragraphs (h)
and (i) of this AD terminate the requirements of paragraph (g) of
this AD.
Exact source excerpt. Text positions 13820–14018, end exclusive, in the original decoded publication. SHA-256: 47c42ef11e7628463b80c68ad632ebaae3ce2ed8806057c22a3d3535337337c5
Credit for Previous Actions
(k) Credit for Previous Actions
This paragraph provides credit for actions required by
paragraphs (h) and (i) of this AD, if those actions were performed
before the effective date of this AD using Bombardier Service
Bulletin 100-25-35, dated November 15, 2012, or Bombardier Service
Bulletin 100-25-35, Revision 01, dated September 23, 2013.
Exact source excerpt. Text positions 14018–14370, end exclusive, in the original decoded publication. SHA-256: e80e2c8b45110273996004ae133828753ccfb10c64da8d0c069c39ea6c0c3db2
Additional AD Provisions
(l) Additional AD Provisions
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Validation Branch, FAA, has the authority to approve
AMOCs for this AD, if requested using the procedures found in 14 CFR
39.19. In accordance with 14 CFR 39.19, send your request to your
principal inspector or responsible Flight Standards Office, as
appropriate. If sending information directly to the manager of the
International Validation Branch, mail it to the address identified
in paragraph (m) of this AD. Information may be emailed to: 9-AVS-
[email protected]. Before using any approved AMOC, notify your
appropriate principal inspector, or lacking a principal inspector,
the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, International
Validation Branch, FAA; or Transport Canada; or Bombardier, Inc.'s
Transport Canada Design Approval Organization (DAO). If approved by
the DAO, the approval must include the DAO-authorized signature.
Exact source excerpt. Text positions 14370–15535, end exclusive, in the original decoded publication. SHA-256: 18d23af68eca48bbd97dcbebcc346cedc4b8c52c3ce07a643682a4591be78b2d
Additional Information
(m) Additional Information
For more information about this AD, contact Steven Dzierzynski,
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7300; email [email protected].
[[Page 76411]]
Exact source excerpt. Text positions 15535–15782, end exclusive, in the original decoded publication. SHA-256: d828948541915148296da20829a3ae398832b095bb2cc869cfb1a5dc3ad8561a
Material Incorporated by Reference
(n) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the material listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this material as applicable to do the actions
required by this AD, unless this AD specifies otherwise.
(3) The following material was approved for IBR on October 23,
2024.
(i) Bombardier Service Bulletin 100-25-35, Revision 02, dated
January 11, 2016.
(ii) [Reserved]
(4) The following material was approved for IBR on December 28,
2009 (74 FR 65401, December 10, 2009).
(i) Bombardier Service Bulletin A100-25-30, dated July 20, 2009.
(ii) [Reserved]
(5) For Bombardier, Inc. material identified in this AD, contact
Bombardier Business Aircraft Customer Response Center, 400
C[ocirc]te-Vertu Road West, Dorval, Qu[eacute]bec H4S 1Y9, Canada;
telephone 514-855-2999; email bombardier.com">ac.yul@aero.bombardier.com; website
bombardier.com.
(6) You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th
Street, Des Moines, WA. For information on the availability of this
material at the FAA, call 206-231-3195.
(7) You may view this material at the National Archives and
Records Administration (NARA). For information on the availability
of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations, or email [email protected].
Exact source excerpt. Text positions 15782–17276, end exclusive, in the original decoded publication. SHA-256: 28cd60567892ec0c2e917080a0139645b9ef360e5bb8b01777bdf7488e769f6a
Explicit historical replacement wording
Find all recorded historical references to AD 2024-16-04 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 37a9e6463e9e251116ff22a547b7b3f8161f9e3543c055dda9c3292e6abfe97a. Source manifest: 70b4c4b3d0827ae6a3771bc8df2e710be7535d904981a8fb534dfd865ec05733.
Official source · 2024-09-18
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 89, Number 181 (Wednesday, September 18, 2024)]
[Rules and Regulations]
[Pages 76408-76411]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-21180]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2024-1469; Project Identifier MCAI-2024-00130-T;
Amendment 39-22810; AD 2024-16-04]
RIN 2120-AA64
Airworthiness Directives; Bombardier, Inc. Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2009-25-
13, which applied to certain Bombardier, Inc., Model BD-100-1A10
(Challenger 300) airplanes. AD 2009-25-13 required the deactivation of
the left-hand (LH) baggage bay heater mat. Since the FAA issued AD
2009-25-13, Bombardier developed a new design solution for the
potential uncontrolled heating of the baggage bay sidewall heater mat.
This AD retains the requirements of AD 2009-25-13 and requires
modifying the baggage bay sidewall interior panel, heater mat, and
water tank heater installation, and doing functional testing. Upon the
completion of the new actions, the retained requirements of AD 2009-25-
13 will terminate. This AD also revises the applicability. The FAA is
issuing this AD to address the unsafe condition on these products.
DATES: This AD is effective October 23, 2024.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of October 23,
2024.
[[Page 76409]]
The Director of the Federal Register approved the incorporation by
reference of a certain other publication listed in this AD as of
December 28, 2009 (74 FR 65401, December 10, 2009).
ADDRESSES:
AD Docket: You may examine the AD docket at regulations.gov under
Docket No. FAA-2024-1469; or in person at Docket Operations between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD
docket contains this final rule, the mandatory continuing airworthiness
information (MCAI), any comments received, and other information. The
address for Docket Operations is U.S. Department of Transportation,
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200
New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
<bullet> For Bombardier, Inc. material identified in this AD,
contact Bombardier Business Aircraft Customer Response Center, 400
C[ocirc]te Vertu Road West, Dorval, Qu[eacute]bec H4S 1Y9, Canada;
telephone 514-855-2999; email bombardier.com">ac.yul@aero.bombardier.com; website
bombardier.com.
<bullet> You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th Street,
Des Moines, WA. For information on the availability of this material at
the FAA, call 206-231-3195. It is also available at regulations.gov
under Docket No. FAA-2024-1469.
FOR FURTHER INFORMATION CONTACT: Steven Dzierzynski, Aviation Safety
Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590;
telephone 516-228-7300; email [email protected].
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 to supersede AD 2009-25-13, Amendment 39-16133 (74 FR
65401, December 10, 2009) (AD 2009-25-13). AD 2009-25-13 applied to
certain Bombardier, Inc., Model BD-100-1A10 airplanes. AD 2009-25-13
required the deactivation of the LH baggage bay heater. The FAA issued
AD 2009-25-13 to address the possibility of uncontrolled heating by the
heater panel, and on the baggage bay compartment, that could result in
a fire in the baggage bay.
The NPRM published in the Federal Register on May 22, 2024 (89 FR
44930). The NPRM was prompted by AD CF-2023-72, dated October 18, 2023,
issued by Transport Canada, which is the aviation authority for Canada
(Transport Canada AD CF-2023-72) (also referred to as the MCAI). The
MCAI states that new procedures have been developed for modifications
of the baggage bay sidewall interior panel, heater mat, and water tank
heater installation that will address the unsafe condition.
In the NPRM, the FAA proposed to continue to require the actions in
AD 2009-25-13, and further require modifying the baggage bay sidewall
interior panel, heater mat, and water tank heater installation, and
doing functional testing. In the NPRM, the FAA proposed that, upon the
completion of the new actions, the retained requirements of AD 2009-25-
13 would terminate. In the NPRM, the FAA also proposed to revise the
applicability to clarify that the AD applies to airplanes having
certain serial numbers (which equates to those equipped with sidewall
heater having part number (P/N) 3436-06-1/0) instead of part numbers
which could be misread. The FAA is issuing this AD to address the
unsafe condition on these products.
You may examine the MCAI in the AD docket at regulations.gov under
Docket No. FAA-2024-1469.
Discussion of Final Airworthiness Directive
Comments
The FAA received no comments on the NPRM or on the determination of
the cost to the public.
Additional Changes Made to This Final Rule
In the NPRM, the FAA inadvertently stated that the NPRM proposed to
prohibit the installation of affected parts. This AD does not contain a
parts installation prohibition, so the FAA deleted references to such a
prohibition.
Conclusion
This product has been approved by the aviation authority of another
country and is approved for operation in the United States. Pursuant to
the FAA's bilateral agreement with this State of Design Authority, it
has notified the FAA of the unsafe condition described in the MCAI
referenced above. The FAA reviewed the relevant data and determined
that air safety requires adopting this AD as proposed. Accordingly, the
FAA is issuing this AD to address the unsafe condition on this product.
Except for minor editorial changes, this AD is adopted as proposed in
the NPRM. None of the changes will increase the economic burden on any
operator.
Material Incorporated by Reference Under 1 CFR Part 51
The FAA reviewed Bombardier Service Bulletin 100-25-35, Revision
02, dated January 11, 2016. This material specifies procedures for
modifying the LH baggage bay sidewall interior panel and heater mat,
installing a LH baggage bay sidewall interior panel blind insert for
certain airplanes, modifying the wiring of the LH and right-hand (RH)
baggage bay sidewall heater mats, re-identifying the LH heater mat as
P/N 3436-07, installing LH and RH heater pictograms for certain
airplanes, modifying the water tank heater installation, and performing
a functional test.
This AD also requires Bombardier Service Bulletin A100-25-30, dated
July 20, 2009, which the Director of the Federal Register approved for
incorporation by reference as of December 28, 2009 (74 FR 65401,
December 10, 2009).
This material is reasonably available because the interested
parties have access to it through their normal course of business or by
the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 340 airplanes of U.S.
registry. The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
Cost per Cost on U.S.
Action Labor cost Parts cost product operators
----------------------------------------------------------------------------------------------------------------
Heater mat deactivation (Retained 1 work-hour x $85 per hour $0 $85 $28,900
actions from AD 2009-25-13). = $85.
Modification and testing (new actions).. 12 work-hours x $85 per 1,150 2,170 737,800
hour = $1,020.
----------------------------------------------------------------------------------------------------------------
[[Page 76410]]
The FAA has included all known costs in its cost estimate.
According to the manufacturer, however, some or all of the costs of
this AD may be covered under warranty, thereby reducing the cost impact
on affected operators.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by:
0
a. Removing Airworthiness Directive 2009-25-13, Amendment 39-16133 (74
FR 65401, December 10, 2009); and
0
b. Adding the following new Airworthiness Directive:
2024-16-04 Bombardier, Inc.: Amendment 39-22810; Docket No. FAA-
2024-1469; Project Identifier MCAI-2024-00130-T.
(a) Effective Date
This airworthiness directive (AD) is effective October 23, 2024.
(b) Affected ADs
This AD replaces AD 2009-25-13, Amendment 39-16133 (74 FR 65401,
December 10, 2009) (AD 2009-25-13).
(c) Applicability
This AD applies to Bombardier, Inc., Model BD-100-1A10
airplanes, certificated in any category, serial numbers 20003
through 20364 inclusive, 20366, 20367, 20369, and 20372.
(d) Subject
Air Transport Association (ATA) of America Code 25, Equipment/
Furnishings.
(e) Reason
This AD was prompted by reports of the baggage bay sidewall
heater mat malfunctioning and by the development of a new design
solution for the potential uncontrolled heating of the heater mats.
The FAA is issuing this AD to address malfunctioning of a baggage
bay sidewall heater mat. The unsafe condition, if not addressed,
could result in a fire in the baggage bay.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Retained Actions, With No Changes
This paragraph restates the requirements of paragraph (g) of AD
2009-25-13, with no changes. Within 100 flight hours after December
28, 2009 (the effective date of AD 2009-25-13), deactivate the left-
hand (LH) baggage bay sidewall heater having part number (P/N) 3436-
06-1/0, in accordance with Bombardier Service Bulletin A100-25-30,
dated July 20, 2009.
(h) New Requirement of This AD: Modification
Within 36 months after the effective date of this AD, do the
applicable actions specified in paragraphs (h)(1) through (7) of
this AD, in accordance with paragraphs 2.B. through 2.E. of the
Accomplishment Instructions of Bombardier Service Bulletin 100-25-
35, Revision 02, dated January 11, 2016.
(1) Remove the baggage bay sidewall heater mat part number (P/N)
3436-06-1/0 from the LH sidewall panel.
(2) Modify the LH baggage bay sidewall interior panel and heater
mat.
(3) Modify the wiring of the LH and right-hand (RH) baggage bay
sidewall heater mats.
(4) Reidentify the LH baggage bay sidewall heater mat as P/N
3436-07.
(5) For airplanes having serial numbers (S/N) 20124, 20125,
20128, 20134, 20139, 20143, 20146, and 20148 to 20215 inclusive:
install LH baggage bay sidewall interior panel blind insert.
(6) For airplanes having S/N 20003 to 20259 inclusive: install
LH and RH heater pictogram.
(7) Modify the water tank heater installation.
(i) New Requirement of This AD: Functional Test
Before further flight after completing paragraph (h) of this AD,
perform the functional tests, in accordance with paragraph 2.F. of
the Accomplishment Instructions of Bombardier Service Bulletin 100-
25-35, Revision 02, dated January 11, 2016.
(j) Terminating Action for Heater Mat Deactivation
Modifying and testing an airplane as required by paragraphs (h)
and (i) of this AD terminate the requirements of paragraph (g) of
this AD.
(k) Credit for Previous Actions
This paragraph provides credit for actions required by
paragraphs (h) and (i) of this AD, if those actions were performed
before the effective date of this AD using Bombardier Service
Bulletin 100-25-35, dated November 15, 2012, or Bombardier Service
Bulletin 100-25-35, Revision 01, dated September 23, 2013.
(l) Additional AD Provisions
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Validation Branch, FAA, has the authority to approve
AMOCs for this AD, if requested using the procedures found in 14 CFR
39.19. In accordance with 14 CFR 39.19, send your request to your
principal inspector or responsible Flight Standards Office, as
appropriate. If sending information directly to the manager of the
International Validation Branch, mail it to the address identified
in paragraph (m) of this AD. Information may be emailed to: 9-AVS-
[email protected]. Before using any approved AMOC, notify your
appropriate principal inspector, or lacking a principal inspector,
the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, International
Validation Branch, FAA; or Transport Canada; or Bombardier, Inc.'s
Transport Canada Design Approval Organization (DAO). If approved by
the DAO, the approval must include the DAO-authorized signature.
(m) Additional Information
For more information about this AD, contact Steven Dzierzynski,
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7300; email [email protected].
[[Page 76411]]
(n) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the material listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this material as applicable to do the actions
required by this AD, unless this AD specifies otherwise.
(3) The following material was approved for IBR on October 23,
2024.
(i) Bombardier Service Bulletin 100-25-35, Revision 02, dated
January 11, 2016.
(ii) [Reserved]
(4) The following material was approved for IBR on December 28,
2009 (74 FR 65401, December 10, 2009).
(i) Bombardier Service Bulletin A100-25-30, dated July 20, 2009.
(ii) [Reserved]
(5) For Bombardier, Inc. material identified in this AD, contact
Bombardier Business Aircraft Customer Response Center, 400
C[ocirc]te-Vertu Road West, Dorval, Qu[eacute]bec H4S 1Y9, Canada;
telephone 514-855-2999; email bombardier.com">ac.yul@aero.bombardier.com; website
bombardier.com.
(6) You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th
Street, Des Moines, WA. For information on the availability of this
material at the FAA, call 206-231-3195.
(7) You may view this material at the National Archives and
Records Administration (NARA). For information on the availability
of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations, or email [email protected].
Issued on September 12, 2024.
Victor Wicklund,
Deputy Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2024-21180 Filed 9-17-24; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T01:28:15.160252+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- da9fadb1402fca9a34a6d9634db1228bec6f60d68c29a7270d1eeb90462df926
- Text SHA-256
- 37a9e6463e9e251116ff22a547b7b3f8161f9e3543c055dda9c3292e6abfe97a
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.