Airworthiness Directives; Airbus Helicopters

[Federal Register Volume 90, Number 117 (Friday, June 20, 2025)]
[Rules and Regulations]
[Pages 26198-26200]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2025-11346]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2025-0350; Project Identifier MCAI-2023-00877-R; 
Amendment 39-23064; AD 2025-12-06]
RIN 2120-AA64


Airworthiness Directives; Airbus Helicopters

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all 
Airbus Helicopters Model AS332L1 helicopters. This AD was prompted by a 
determination that new or more restrictive airworthiness limitations 
are necessary. This AD requires revising the airworthiness limitations 
section (ALS) of the existing maintenance manual (MM) or instructions 
for continued airworthiness (ICAs) and the existing approved 
maintenance or inspection program, as applicable. The FAA is issuing 
this AD to address the unsafe condition on these products.

DATES: This AD is effective July 25, 2025.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of July 25, 
2025.

ADDRESSES: 
    AD Docket: You may examine the AD docket at regulations.gov under 
Docket No. FAA-2025-0350; or in person at Docket Operations between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD 
docket contains this final rule, the mandatory continuing airworthiness 
information (MCAI), any comments received, and other information. The 
address for Docket Operations is U.S. Department of Transportation, 
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 
New Jersey Avenue SE, Washington, DC 20590.
    Material Incorporated by Reference:
    <bullet> For European Union Aviation Safety Agency (EASA) material 
identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 
Cologne, Germany; phone: +49 221 8999 000; email: [email protected]; 
website: easa.europa.eu. You may find the EASA material on the EASA 
website at ad.easa.europa.eu.
    <bullet> You may view this material at the FAA, Office of the 
Regional Counsel, Southwest Region, 10101 Hillwood Parkway, Room 6N-
321, Fort Worth, TX 76177. For information on the availability of this 
material at the FAA, call (817) 222-5110. It is also available at 
regulations.gov under Docket No. FAA-2025-0350.

FOR FURTHER INFORMATION CONTACT: Adam Hein, Aviation Safety Engineer, 
FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: (316) 
946-4116; email: [email protected].

SUPPLEMENTARY INFORMATION:

Background

    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 
CFR part 39 by adding an AD that would apply to all Airbus Helicopters 
Model

[[Page 26199]]

AS332L1 helicopters. The NPRM was published in the Federal Register on 
March 19, 2025 (90 FR 12691). The NPRM was prompted by AD 2023-0142, 
dated July 14, 2023 (EASA AD 2023-0142) (also referred to as the MCAI), 
issued by EASA, which is the Technical Agent for the Member States of 
the European Union. The MCAI states that new or more restrictive 
airworthiness limitations have been developed. EASA advises that 
airworthiness limitations and certification maintenance instructions 
are identified as mandatory for continued airworthiness and that 
Revision 9 of Airbus Helicopters Model AS 332 L1 ALS, dated July 27, 
2022, has been issued to specify all service life limits and 
maintenance tasks for Model AS 332 L1 helicopters and separate the 
airworthiness limitations from the Master Servicing Manual.
    In the NPRM, the FAA proposed to require revising the ALS of the 
existing MM or ICAs and the existing approved maintenance or inspection 
program, as applicable. The FAA is issuing this AD to prevent failure 
of critical parts and primary structural components, which if not 
addressed could result in loss of control of the helicopter.
    You may examine the MCAI in the AD docket at regulations.gov under 
Docket No. FAA-2025-0350.

Discussion of Final Airworthiness Directive

Comments

    The FAA received a comment from an individual who supported the 
NPRM without change.

Conclusion

    These products have been approved by the civil aviation authority 
of another country and are approved for operation in the United States. 
Pursuant to the FAA's bilateral agreement with this State of Design 
Authority, that authority has notified the FAA of the unsafe condition 
described in the MCAI referenced above. The FAA reviewed the relevant 
data, considered any comments received, and determined that air safety 
requires adopting this AD as proposed. Accordingly, the FAA is issuing 
this AD to address the unsafe condition on these products. Except for 
minor editorial changes, this AD is adopted as proposed in the NPRM. 
None of the changes will increase the economic burden on any operator.

Material Incorporated by Reference Under 1 CFR Part 51

    The FAA reviewed EASA AD 2023-0142, which requires replacing 
components before exceeding their life limits and accomplishing all 
applicable maintenance tasks within thresholds and intervals specified 
in the ALS as defined in EASA AD 2023-0142. Depending on the results of 
the maintenance tasks, EASA AD 2023-0142 requires accomplishing 
corrective action(s) or contacting Airbus Helicopters for approved 
instructions and accomplishing those instructions.
    Additionally, EASA AD 2023-0142 requires revising the Aircraft 
Maintenance Programme (AMP) by incorporating the limitations, tasks, 
and associated thresholds and intervals described in the specified ALS, 
as applicable. Revising the AMP constitutes terminating action for the 
requirement to record accomplishment of the actions of replacing 
components before exceeding their life limits and accomplishing 
maintenance tasks within thresholds and intervals specified in the 
applicable ALS as required by EASA AD 2023-0142 for demonstration of AD 
compliance on a continued basis.
    This material is reasonably available because the interested 
parties have access to it through their normal course of business or by 
the means identified in the ADDRESSES section.

Costs of Compliance

    The FAA estimates that this AD affects seven helicopters of U.S. 
registry. Labor rates are estimated at $85 per hour. Based on these 
numbers, the FAA estimates the following costs to comply with this AD.
    Revising the ALS of the existing MM or ICAs and the existing 
approved maintenance or inspection program, as applicable, takes 1 
work-hour, for an estimated cost of $85 per helicopter and $595 for the 
U.S. fleet.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

2025-12-06 Airbus Helicopters: Amendment 39-23064; Docket No. FAA-
2025-0350; Project Identifier MCAI-2023-00877-R.

(a) Effective Date

    This airworthiness directive (AD) is effective July 25, 2025.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to Airbus Helicopters Model AS332L1 helicopters, 
certificated in any category.

(d) Subject

    Air Transport Association (ATA) of America Code 05, Time Limits/
Maintenance Checks.

(e) Unsafe Condition

    This AD was prompted by new or more restrictive airworthiness 
limitations. The

[[Page 26200]]

FAA is issuing this AD to prevent failure of critical parts and 
primary structural components, which if not addressed, could result 
in loss of control of the helicopter.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Required Action

    Except as specified in paragraphs (h) and (i) of this AD: Comply 
with all required actions and compliance times specified in, and in 
accordance with, European Union Aviation Safety Agency AD 2023-0142, 
dated July 14, 2023 (EASA AD 2023-0142).

(h) Exceptions to EASA AD 2023-0142

    (1) Where EASA AD 2023-0142 refers to its effective date, this 
AD requires using the effective date of this AD.
    (2) This AD does not adopt paragraphs (1), (2), (4), and (5) of 
EASA AD 2023-0142.
    (3) Where paragraph (3) of EASA AD 2023-0142 specifies ``Within 
12 months after the effective date of this AD, revise the approved 
AMP,'' this AD requires replacing that text with ``Within 30 days 
after the effective date of this AD, revise the airworthiness 
limitations section of the existing maintenance manual or 
instructions for continued airworthiness and the existing approved 
maintenance or inspection program, as applicable.''
    (4) The initial compliance time for doing the tasks specified in 
paragraph (3) of EASA AD 2023-0142 is on or before the applicable 
``limitations'' and ``associated thresholds'' as incorporated by the 
requirements of paragraph (3) of EASA AD 2023-0142 or within 30 days 
after the effective date of this AD, whichever occurs later.
    (5) This AD does not adopt the ``Remarks'' section of EASA AD 
2023-0142.

(i) Provisions for Alternative Actions and Intervals

    After the action required by paragraph (g) of this AD has been 
done, no alternative actions and associated thresholds and 
intervals, including life limits, are allowed unless they are 
approved as specified in the provisions of the ``Ref. Publications'' 
section of EASA AD 2023-0142.

(j) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, International Validation Branch, FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the manager of the International Validation Branch, send 
it to the attention of the person identified in paragraph (k) of 
this AD and email to: [email protected].
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the local flight standards district office/certificate holding 
district office.

(k) Additional Information

    For more information about this AD, contact Adam Hein, Aviation 
Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 
11590; phone: (316) 946-4116; email: [email protected].

(l) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference of the material listed in this paragraph 
under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this material as applicable to do the actions 
required by this AD, unless the AD specifies otherwise.
    (i) European Union Aviation Safety Agency (EASA) AD 2023-0142, 
dated July 14, 2023.
    (ii) [Reserved]
    (3) For EASA material identified in this AD, contact EASA, 
Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; phone: +49 221 8999 
000; email: [email protected]; website: easa.europa.eu. You may 
find the EASA material on the EASA website at ad.easa.europa.eu.
    (4) You may view this material at the FAA, Office of the 
Regional Counsel, Southwest Region, 10101 Hillwood Parkway, Room 6N-
321, Fort Worth, TX 76177. For information on the availability of 
this material at the FAA, call (817) 222-5110.
    (5) You may view this material at the National Archives and 
Records Administration (NARA). For information on the availability 
of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email [email protected].

    Issued on June 13, 2025.
Christopher R. Parker,
Acting Deputy Director, Compliance & Airworthiness Division, Aircraft 
Certification Service.
[FR Doc. 2025-11346 Filed 6-18-25; 8:45 am]
BILLING CODE 4910-13-P

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T01:23:39.383913+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256

4c02f41889103b12336f1b26874cd55aa29021a89b6b9637a86fcae70fb55c88

Text SHA-256

b52cbb2134f4b16a6649f3b1a0fd3f338ee3c51462f71c9beb643372cdea05e1