Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes

[Federal Register Volume 90, Number 234 (Tuesday, December 9, 2025)]
[Rules and Regulations]
[Pages 56988-56990]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2025-22339]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2025-2259; Project Identifier MCAI-2025-00021-T; 
Amendment 39-23206; AD 2025-24-09]
RIN 2120-AA64


Airworthiness Directives; ATR--GIE Avions de Transport 
R[eacute]gional Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all 
ATR--GIE Avions de Transport R[eacute]gional Model ATR42 and Model 
ATR72 airplanes. This AD was

[[Page 56989]]

prompted by a design review that determined that the inspection 
interval of the pressure regulator and shut-off valve (PRSOV) 
functional test must be reduced to meet the design safety objectives, 
due to a risk of dormant failures. This AD requires repetitive 
functional tests of each PRSOV, and applicable corrective actions. The 
FAA is issuing this AD to address the unsafe condition on these 
products.

DATES: This AD is effective January 13, 2026.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of January 13, 
2026.

ADDRESSES: 
    AD Docket: You may examine the AD docket at regulations.gov under 
Docket No. FAA-2025-2259; or in person at Docket Operations between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD 
docket contains this final rule, the mandatory continuing airworthiness 
information (MCAI), any comments received, and other information. The 
address for Docket Operations is U.S. Department of Transportation, 
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 
New Jersey Avenue SE, Washington, DC 20590.
    Material Incorporated by Reference:
    <bullet> For European Union Aviation Safety Agency (EASA) material 
identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 
Cologne, Germany; telephone +49 221 8999 000; email [email protected]. 
You may find this material on the EASA website at ad.easa.europa.eu.
    <bullet> You may view this material at the FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., Des 
Moines, WA. For information on the availability of this material at the 
FAA, call 206-231-3195. It is also available at regulations.gov under 
Docket No. FAA-2025-2259.

FOR FURTHER INFORMATION CONTACT: Brenda L. Buitrago, Aviation Safety 
Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; 
phone: 516-288-7368; email: [email protected].

SUPPLEMENTARY INFORMATION:

Background

    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 
CFR part 39 by adding an AD that would apply to all ATR--GIE Avions de 
Transport R[eacute]gional Model ATR42 and Model ATR72 airplanes. The 
NPRM was published in the Federal Register on August 19, 2025 (90 FR 
40266). The NPRM was prompted by AD 2025-0011, dated January 10, 2025 
(EASA AD 2025-0011) (also referred to as the MCAI), issued by EASA, 
which is the Technical Agent for the Member States of the European 
Union. The MCAI states that following a design review it was determined 
the interval of the PRSOV functional test in the current ATR 
maintenance instructions must be reduced to meet the design safety 
objectives, due to a risk of dormant failures. This dormant failure, in 
combination with the icing conditions, could result in loss of control 
of the airplane.
    In the NPRM, the FAA proposed to require repetitive functional 
tests of each PRSOV, and applicable corrective actions, as specified in 
EASA AD 2025-0011. The FAA is issuing this AD to address the unsafe 
condition on these products.
    You may examine the MCAI in the AD docket at regulations.gov under 
Docket No. FAA-2025-2259.

Discussion of Final Airworthiness Directive

Comments

    The FAA received a comment from Air Line Pilots Association, 
International (ALPA) who supported the NPRM without change.

Conclusion

    These products have been approved by the civil aviation authority 
of another country and are approved for operation in the United States. 
Pursuant to the FAA's bilateral agreement with this State of Design 
Authority, that authority has notified the FAA of the unsafe condition 
described in the MCAI referenced above. The FAA reviewed the relevant 
data, considered any comments received, and determined that air safety 
requires adopting this AD as proposed. Accordingly, the FAA is issuing 
this AD to address the unsafe condition on these products. Except for 
minor editorial changes, this AD is adopted as proposed in the NPRM. 
None of the changes will increase the economic burden on any operator.

Material Incorporated by Reference Under 1 CFR Part 51

    The FAA reviewed EASA AD 2025-0011, which specifies procedures for 
repetitive functional tests of each PRSOV, including the first level 
pressure regulation, for discrepancies (results other than those in the 
results column of the applicable tables in the material referenced in 
EASA AD 2025-0011), and applicable corrective actions. Corrective 
actions include troubleshooting and repairing any faults and contacting 
the manufacturer for instructions.
    This material is reasonably available because the interested 
parties have access to it through their normal course of business or by 
the means identified in the ADDRESSES section.

Costs of Compliance

    The FAA estimates that this AD affects 114 airplanes of U.S. 
registry. The FAA estimates the following costs to comply with this AD:

                                      Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
                                                                                    Cost per       Cost on U.S.
                          Labor cost                              Parts cost        product         operators
----------------------------------------------------------------------------------------------------------------
50 work-hours x $85 per hour = $4,250........................              $0           $4,250         $484,500
----------------------------------------------------------------------------------------------------------------

    The FAA has received no definitive data on which to base the cost 
estimates for the on-condition actions specified in this AD.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or

[[Page 56990]]

develop on products identified in this rulemaking action.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

2025-24-09 ATR--GIE Avions de Transport R[eacute]gional: Amendment 
39-23206; Docket No. FAA-2025-2259; Project Identifier MCAI-2025-
00021-T.

(a) Effective Date

    This airworthiness directive (AD) is effective January 13, 2026.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to all ATR--GIE Avions de Transport 
R[eacute]gional Model ATR42-200, -300, -320, and -500 airplanes; and 
Model ATR72-101, -102, -201, -202, -211, -212, and -212A airplanes, 
certificated in any category.

(d) Subject

    Air Transport Association (ATA) of America Code 30, Ice and rain 
protection.

(e) Unsafe Condition

    This AD was prompted by a design review that determined that the 
interval of the pressure regulator and shut-off valve (PRSOV) 
functional test must be reduced to meet the design safety 
objectives, due to a risk of dormant failures. The FAA is issuing 
this AD to address this dormant failure, which in combination with 
the icing conditions could result in loss of control of the 
airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, European Union Aviation Safety Agency (EASA) AD 
2025-0011, dated January 10, 2025 (EASA AD 2025-0011).

(h) Exceptions to EASA AD 2025-0011

    (1) Where EASA AD 2025-0011 refers to its effective date, this 
AD requires using the effective date of this AD.
    (2) This AD does not adopt the ``Remarks'' section of EASA AD 
2025-0011.
    (3) Where EASA AD 2025-0011 specifies ``any discrepancy'', this 
AD requires replacing that text with ``any result other than those 
in the results column of the applicable tables in the AOM''.

(i) Additional AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International Validation Branch, FAA, has the authority to approve 
AMOCs for this AD, if requested using the procedures found in 14 CFR 
39.19. In accordance with 14 CFR 39.19, send your request to your 
principal inspector or responsible Flight Standards Office, as 
appropriate. If sending information directly to the manager of the 
International Validation Branch, send it to the attention of the 
person identified in paragraph (j) of this AD and email to: 
[email protected]. Before using any approved AMOC, notify your 
appropriate principal inspector, or lacking a principal inspector, 
the manager of the responsible Flight Standards Office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, International 
Validation Branch, FAA; or EASA; or ATR--GIE Avions de Transport 
R[eacute]gional's EASA Design Organization Approval (DOA). If 
approved by the DOA, the approval must include the DOA-authorized 
signature.

(j) Additional Information

    For more information about this AD, contact Brenda L. Buitrago, 
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, 
Westbury, NY 11590; phone: 516-288-7368; email: [email protected].

(k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference of the material listed in this paragraph 
under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this material as applicable to do the actions 
required by this AD, unless this AD specifies otherwise.
    (i) European Union Aviation Safety Agency (EASA) AD 2025-0011, 
dated January 10, 2025.
    (ii) [Reserved]
    (3) For EASA material identified in this AD, contact EASA, 
Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 
8999 000; email [email protected]. You may find this material on 
the EASA website at ad.easa.europa.eu.
    (4) You may view this material at the FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., 
Des Moines, WA. For information on the availability of this material 
at the FAA, call 206-231-3195.
    (5) You may view this material at the National Archives and 
Records Administration (NARA). For information on the availability 
of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email [email protected].

    Issued on November 20, 2025.
Steven W. Thompson,
Acting Deputy Director, Compliance & Airworthiness Division, Aircraft 
Certification Service.
[FR Doc. 2025-22339 Filed 12-8-25; 8:45 am]
BILLING CODE 4910-13-P

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T00:52:44.684239+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256

93273bcaf34a8afb2bc2ce355b99c6e0e103dfb2648910619c9cdcd4f399abd6

Text SHA-256

1a51b3c2f4564d7b6062b164d501452e7bfcb4336c32f52cf8f3c895274e74f1