Published 1998-09-22 · Federal Register document 98-25026
Airworthiness Directives; Dornier Model 328-100 Series Airplanes
Publication summary
This amendment adopts a new airworthiness directive (AD), applicable to certain Dornier Model 328-100 series airplanes, that requires replacement of certain landing gear proximity sensor electrical units (PSEU) with improved units. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. The actions specified by this AD are intended to prevent the failure of normal extension and retraction of the landing gear, which could result in collapse of the main landing gear upon landing.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:22:53.985165+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_1998-f5c1cf5c93c99179
- Source row
- results[525]
- Raw source SHA-256
- f5c1cf5c93c99179023030016db80652e7593139090148c64a6fd533918aa991
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 98-20-12
- Effective date printed in this edition
- 1998-10-27
Some source clauses remain unstructured. Read the complete publication for conditions that have not been interpreted here.
Read 2 complete recorded clauses
Applicability wording · Applicability
Applicability: Model 328-100 series airplanes, equipped with
landing gear proximity sensor electrical units (PSEU) having part
number (P/N) 8-700-03 or 8-700-04; certificated in any category.
Note 1: This AD applies to each airplane identified in the
preceding applicability provision, regardless of whether it has been
modified, altered, or repaired in the area subject to the
requirements of this AD. For airplanes that have been modified,
altered, or repaired so that the performance of the requirements of
this AD is affected, the owner/operator must request approval for an
alternative method of compliance in accordance with paragraph (c) of
this AD. The request should include an assessment of the effect of
the modification, alteration, or repair on the unsafe condition
addressed by this AD; and, if the unsafe condition has not been
eliminated, the request should include specific proposed actions to
address it.
Exact source excerpt. Text positions 5406–6352, end exclusive, in the original decoded publication. SHA-256: 42de9ce83ebc6fb522c9d1927efbd7d1ea6852f1c17e1a5c24f6dae9eec92567
Compliance and requirements
Compliance: Required as indicated, unless accomplished
previously.
To prevent the failure of normal extension and retraction of the
landing gear, which could result in collapse of the main landing
gear upon landing, accomplish the following:
(a) Within 12 months after the effective date of this AD,
replace the landing gear PSEU's having P/N 8-700-03 or 8-700-04 with
PSEU's having P/N 8-700-04 Mod A or 8-700-05, in accordance with
Dornier Service Bulletin SB-328-32-248, Revision 1, dated April 22,
1998.
Note 2: Dornier Service Bulletin SB-328-32-248, Revision 1,
dated April 22, 1998, references Crane ELDEC Corporation Service
Bulletin 8-700-31-02, Revision 1, December 11, 1997, as an
additional source of service information to accomplish the actions
required by this AD.
(b) As of the effective date of this AD, no person shall install
a landing gear PSEU having P/N 8-700-03 or 8-700-04 on any airplane.
(c) An alternative method of compliance or adjustment of the
compliance time that provides an acceptable level of safety may be
used if approved by the Manager, International Branch, ANM-116, FAA,
Transport Airplane Directorate. Operators shall submit their
requests through an appropriate FAA Principal Maintenance Inspector,
who may add comments and then send it to the Manager, International
Branch, ANM-116.
Note 3: Information concerning the existence of approved
alternative methods of compliance with this AD, if any, may be
obtained from the International Branch, ANM-116.
(d) Special flight permits may be issued in accordance with
sections 21.197 and 21.199 of the Federal Aviation Regulations (14
CFR 21.197 and 21.199) to operate the airplane to a location where
the requirements of this AD can be accomplished.
[[Page 50495]]
(e) The replacement shall be done in accordance with Dornier
Service Bulletin SB-328-32-248, Revision 1, dated April 22, 1998.
This incorporation by reference was approved by the Director of the
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part
51. Copies may be obtained from FAIRCHILD DORNIER, DORNIER Luftfahrt
GmbH, P.O. Box 1103, D-82230 Wessling, Germany. Copies may be
inspected at the FAA, Transport Airplane Directorate, 1601 Lind
Avenue, SW., Renton, Washington; or at the Office of the Federal
Register, 800 North Capitol Street, NW., suite 700, Washington, DC.
Note 4: The subject of this AD is addressed in German
airworthiness directive 1998-137, dated March 26, 1998.
(f) This amendment becomes effective on October 27, 1998.
Exact source excerpt. Text positions 6352–8947, end exclusive, in the original decoded publication. SHA-256: e1c53f4f80226bf8d4f6b4e3e834cd54a359223a5d43bc15634e0082d723d2a7
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 98-20-12 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 79de92876c4713cd3e447bbf19ee06af37289105f4e5daa4e28d9f1570a0a8a7. Source manifest: 0dc2a1e52bd0b981e2b013860ee7f9ff041151ec1d616d39bcc50e94e2d8be8a.
Official source · 1998-09-22
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 63, Number 183 (Tuesday, September 22, 1998)]
[Rules and Regulations]
[Pages 50493-50495]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-25026]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 98-NM-162-AD; Amendment 39-10779; AD 98-20-12]
RIN 2120-AA64
Airworthiness Directives; Dornier Model 328-100 Series Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: This amendment adopts a new airworthiness directive (AD),
applicable to certain Dornier Model 328-100 series airplanes, that
requires replacement of certain landing gear proximity sensor
electrical units (PSEU)
[[Page 50494]]
with improved units. This amendment is prompted by issuance of
mandatory continuing airworthiness information by a foreign civil
airworthiness authority. The actions specified by this AD are intended
to prevent the failure of normal extension and retraction of the
landing gear, which could result in collapse of the main landing gear
upon landing.
DATES: Effective October 27, 1998.
The incorporation by reference of certain publications listed in
the regulations is approved by the Director of the Federal Register as
of October 27, 1998.
ADDRESSES: The service information referenced in this AD may be
obtained from FAIRCHILD DORNIER, DORNIER Luftfahrt GmbH, P.O. Box 1103,
D-82230 Wessling, Germany. This information may be examined at the
Federal Aviation Administration (FAA), Transport Airplane Directorate,
Rules Docket, 1601 Lind Avenue, SW., Renton, Washington; or at the
Office of the Federal Register, 800 North Capitol Street, NW., suite
700, Washington, DC.
FOR FURTHER INFORMATION CONTACT: Norman B. Martenson, Manager,
International Branch, ANM-116, FAA, Transport Airplane Directorate,
1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425)
227-2110; fax (425) 227-1149.
SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal
Aviation Regulations (14 CFR part 39) to include an airworthiness
directive (AD) that is applicable to certain Dornier Model 328-100
series airplanes was published in the Federal Register on July 31, 1998
(63 FR 40854). That action proposed to require replacement of certain
landing gear proximity sensor electrical units (PSEU) with improved
units.
Comments
Interested persons have been afforded an opportunity to participate
in the making of this amendment. No comments were submitted in response
to the proposal or the FAA's determination of the cost to the public.
Conclusion
The FAA has determined that air safety and the public interest
require the adoption of the rule as proposed.
Cost Impact
The FAA estimates that 50 airplanes of U.S. registry will be
affected by this AD, that it will take approximately 1 work hour per
airplane to accomplish the required replacement, and that the average
labor rate is $60 per work hour. Required parts will be supplied by the
manufacturer at no cost to the operators. Based on these figures, the
cost impact of the AD on U.S. operators is estimated to be $3,000, or
$60 per airplane.
The cost impact figure discussed above is based on assumptions that
no operator has yet accomplished any of the requirements of this AD
action, and that no operator would accomplish those actions in the
future if this AD were not adopted.
Regulatory Impact
The regulations adopted herein will not have substantial direct
effects on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government. Therefore, in
accordance with Executive Order 12612, it is determined that this final
rule does not have sufficient federalism implications to warrant the
preparation of a Federalism Assessment.
For the reasons discussed above, I certify that this action (1) is
not a ``significant regulatory action'' under Executive Order 12866;
(2) is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979); and (3) will not have a
significant economic impact, positive or negative, on a substantial
number of small entities under the criteria of the Regulatory
Flexibility Act. A final evaluation has been prepared for this action
and it is contained in the Rules Docket. A copy of it may be obtained
from the Rules Docket at the location provided under the caption
ADDRESSES.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the
Administrator, the Federal Aviation Administration amends part 39 of
the Federal Aviation Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. Section 39.13 is amended by adding the following new
airworthiness directive:
98-20-12 Dornier Luftfahrt GMBH: Amendment 39-10779. Docket 98-NM-
162-AD.
Applicability: Model 328-100 series airplanes, equipped with
landing gear proximity sensor electrical units (PSEU) having part
number (P/N) 8-700-03 or 8-700-04; certificated in any category.
Note 1: This AD applies to each airplane identified in the
preceding applicability provision, regardless of whether it has been
modified, altered, or repaired in the area subject to the
requirements of this AD. For airplanes that have been modified,
altered, or repaired so that the performance of the requirements of
this AD is affected, the owner/operator must request approval for an
alternative method of compliance in accordance with paragraph (c) of
this AD. The request should include an assessment of the effect of
the modification, alteration, or repair on the unsafe condition
addressed by this AD; and, if the unsafe condition has not been
eliminated, the request should include specific proposed actions to
address it.
Compliance: Required as indicated, unless accomplished
previously.
To prevent the failure of normal extension and retraction of the
landing gear, which could result in collapse of the main landing
gear upon landing, accomplish the following:
(a) Within 12 months after the effective date of this AD,
replace the landing gear PSEU's having P/N 8-700-03 or 8-700-04 with
PSEU's having P/N 8-700-04 Mod A or 8-700-05, in accordance with
Dornier Service Bulletin SB-328-32-248, Revision 1, dated April 22,
1998.
Note 2: Dornier Service Bulletin SB-328-32-248, Revision 1,
dated April 22, 1998, references Crane ELDEC Corporation Service
Bulletin 8-700-31-02, Revision 1, December 11, 1997, as an
additional source of service information to accomplish the actions
required by this AD.
(b) As of the effective date of this AD, no person shall install
a landing gear PSEU having P/N 8-700-03 or 8-700-04 on any airplane.
(c) An alternative method of compliance or adjustment of the
compliance time that provides an acceptable level of safety may be
used if approved by the Manager, International Branch, ANM-116, FAA,
Transport Airplane Directorate. Operators shall submit their
requests through an appropriate FAA Principal Maintenance Inspector,
who may add comments and then send it to the Manager, International
Branch, ANM-116.
Note 3: Information concerning the existence of approved
alternative methods of compliance with this AD, if any, may be
obtained from the International Branch, ANM-116.
(d) Special flight permits may be issued in accordance with
sections 21.197 and 21.199 of the Federal Aviation Regulations (14
CFR 21.197 and 21.199) to operate the airplane to a location where
the requirements of this AD can be accomplished.
[[Page 50495]]
(e) The replacement shall be done in accordance with Dornier
Service Bulletin SB-328-32-248, Revision 1, dated April 22, 1998.
This incorporation by reference was approved by the Director of the
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part
51. Copies may be obtained from FAIRCHILD DORNIER, DORNIER Luftfahrt
GmbH, P.O. Box 1103, D-82230 Wessling, Germany. Copies may be
inspected at the FAA, Transport Airplane Directorate, 1601 Lind
Avenue, SW., Renton, Washington; or at the Office of the Federal
Register, 800 North Capitol Street, NW., suite 700, Washington, DC.
Note 4: The subject of this AD is addressed in German
airworthiness directive 1998-137, dated March 26, 1998.
(f) This amendment becomes effective on October 27, 1998.
Issued in Renton, Washington, on September 14, 1998.
Dorenda D. Baker,
Acting Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 98-25026 Filed 9-21-98; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:58:25.507907+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- 418ecb1ade5146c033e9f491bda8a744559ce360fa6417287a71e8b33c16ffad
- Text SHA-256
- 79de92876c4713cd3e447bbf19ee06af37289105f4e5daa4e28d9f1570a0a8a7
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.