Back to publication catalog

Published 1998-09-22 · Federal Register document 98-25122

Airworthiness Directives; Airbus Model A300 Series Airplanes

Publication summary

This amendment adopts a new airworthiness directive (AD), applicable to certain Airbus Model A300 series airplanes, that requires modification of the struts for the stowage box located forward of galley 2. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. The actions specified by this AD are intended to prevent failure of the struts, which could result in displacement of the stowage box, and possible injury to passengers and flight crew.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:22:53.985165+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_1998-f5c1cf5c93c99179
Source row
results[532]
Raw source SHA-256
f5c1cf5c93c99179023030016db80652e7593139090148c64a6fd533918aa991

Final-rule publication

Recorded publication clauses

AD identifier printed in this edition
98-20-16
Effective date printed in this edition
1998-10-27

Some source clauses remain unstructured. Read the complete publication for conditions that have not been interpreted here.

Read 2 complete recorded clauses
Applicability wording · Applicability
    Applicability: Model A300 series airplanes on which a stowage 
box located forward of galley 2 is installed; and on which Airbus 
Industrie Modification 5105 (Airbus Service Bulletin A300-25-395, 
dated March 22, 1984) has not been accomplished; certificated in any 
category.

    Note 1: This AD applies to each airplane identified in the 
preceding applicability provision, regardless of whether it has been 
otherwise modified, altered, or repaired in the area subject to the 
requirements of this AD. For airplanes that have been modified, 
altered, or repaired so that the performance of the requirements of 
this AD is affected, the owner/operator must request approval for an 
alternative method of compliance in accordance with paragraph (c) of 
this AD. The request should include an assessment of the effect of 
the modification, alteration, or repair on the unsafe condition 
addressed by this AD; and, if the unsafe condition has not been 
eliminated, the request should include specific proposed actions to 
address it.

Exact source excerpt. Text positions 5398–6437, end exclusive, in the original decoded publication. SHA-256: 9f1a5900f6a5c2e83292edab8fa823614ea9372d6f03a5af37e87414bfdbbdaa

Compliance and requirements
    Compliance: Required as indicated, unless accomplished 
previously.
    To prevent failure of the struts for the stowage box located 
forward of galley 2, which could result in displacement of the 
stowage box, and possible injury to passengers and flight crew, 
accomplish the following:
    (a) Within 18 months after the effective date of this AD, modify 
the struts for the stowage box located forward of galley 2, in 
accordance with Airbus Service Bulletin A300-25-395, dated March 22, 
1984, as revised by Change Notices OB, dated June 2, 1985, and OC, 
dated June 20, 1988.
    (b) As of the effective date of this AD, no person shall install 
on any airplane a strut, part number (P/N) A2527979620000, on the 
stowage box located forward of galley 2.
    (c) An alternative method of compliance or adjustment of the 
compliance time that provides an acceptable level of safety may be 
used if approved by the Manager, International Branch, ANM-116, FAA, 
Transport Airplane Directorate. Operators shall submit their 
requests through an appropriate FAA Principal Maintenance Inspector, 
who may add comments and then send it to the Manager, International 
Branch, ANM-116.

    Note 2: Information concerning the existence of approved 
alternative methods of compliance with this AD, if any, may be 
obtained from the International Branch, ANM-116.

    (d) Special flight permits may be issued in accordance with 
sections 21.197 and 21.199 of the Federal Aviation Regulations (14 
CFR 21.197 and 21.199) to operate the airplane to a location where 
the requirements of this AD can be accomplished.
    (e) The modification shall be done in accordance with Airbus 
Service Bulletin A300-25-395, dated March 22, 1984, as revised by 
Change Notice OB, dated June 2, 1985, and Change Notice OC, dated 
June 20, 1988. This incorporation by reference was approved by the 
Director of the Federal Register in accordance with 5 U.S.C. 552(a) 
and 1 CFR part 51. Copies may be obtained from Airbus Industrie, 1 
Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France. Copies may 
be inspected at the FAA, Transport Airplane Directorate, 1601 Lind 
Avenue, SW., Renton, Washington; or at the Office of the Federal 
Register, 800 North Capitol Street, NW., suite 700, Washington, DC.

    Note 3: The subject of this AD is addressed in French 
airworthiness directive 97-359-233(B), dated November 19, 1997.

    (f) This amendment becomes effective on October 27, 1998.

Exact source excerpt. Text positions 6437–8914, end exclusive, in the original decoded publication. SHA-256: a781a3d0d0590b9a72a07d70238c1d7a21783f766861e4f5588d126a8f128c7c

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 98-20-16 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 59e9a96a0da5821faa8b322892480d2f824eaa3b4bf5130b61a3e748e79a0c2e. Source manifest: ad5224438bd8b66986a64063537a73d693e69a37865fd41b3ada3d7de5dd1b2d.

Official source · 1998-09-22

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 63, Number 183 (Tuesday, September 22, 1998)]
[Rules and Regulations]
[Pages 50498-50499]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-25122]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. 98-NM-206-AD; Amendment 39-10783; AD 98-20-16]
RIN 2120-AA64


Airworthiness Directives; Airbus Model A300 Series Airplanes

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: This amendment adopts a new airworthiness directive (AD), 
applicable to certain Airbus Model A300 series airplanes, that requires 
modification of the struts for the stowage box located forward of 
galley 2. This amendment is prompted by issuance of mandatory 
continuing airworthiness information by a foreign civil airworthiness 
authority. The actions specified by this AD are intended to prevent 
failure of the struts, which could result in displacement of the 
stowage box, and possible injury to passengers and flight crew.

DATES: Effective October 27, 1998.
    The incorporation by reference of certain publications listed in 
the regulations is approved by the Director of the Federal Register as 
of October 27, 1998.

ADDRESSES: The service information referenced in this AD may be 
obtained from Airbus Industrie, 1 Rond Point Maurice Bellonte, 31707 
Blagnac Cedex, France. This information may be examined at the Federal 
Aviation Administration (FAA), Transport Airplane Directorate, Rules 
Docket, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of 
the Federal Register, 800 North Capitol Street, NW., suite 700, 
Washington, DC.

FOR FURTHER INFORMATION CONTACT: Norman B. Martenson, Manager, 
International Branch, ANM-116, FAA, Transport Airplane Directorate, 
1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 
227-2110; fax (425) 227-1149.


[[Page 50499]]


SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal 
Aviation Regulations (14 CFR part 39) to include an airworthiness 
directive (AD) that is applicable to certain Airbus Model A300 series 
airplanes was published in the Federal Register on July 31, 1998 (63 FR 
40849). That action proposed to require modification of the struts for 
the stowage box located forward of galley 2.

Comments

    Interested persons have been afforded an opportunity to participate 
in the making of this amendment. Due consideration has been given to 
the single comment received.
    The commenter does not object to the proposed rule.

Conclusion

    After careful review of the available data, including the comment 
noted above, the FAA has determined that air safety and the public 
interest require the adoption of the rule as proposed.

Cost Impact

    The FAA estimates that 24 airplanes of U.S. registry will be 
affected by this AD, that it will take approximately 2 work hours per 
airplane to accomplish the required modification, and that the average 
labor rate is $60 per work hour. Required parts will cost approximately 
$226 per airplane. Based on these figures, the cost impact of the AD on 
U.S. operators is estimated to be $8,304, or $346 per airplane.
    The cost impact figure discussed above is based on assumptions that 
no operator has yet accomplished any of the requirements of this AD 
action, and that no operator would accomplish those actions in the 
future if this AD were not adopted.

Regulatory Impact

    The regulations adopted herein will not have substantial direct 
effects on the States, on the relationship between the national 
government and the States, or on the distribution of power and 
responsibilities among the various levels of government. Therefore, in 
accordance with Executive Order 12612, it is determined that this final 
rule does not have sufficient federalism implications to warrant the 
preparation of a Federalism Assessment.
    For the reasons discussed above, I certify that this action (1) is 
not a ``significant regulatory action'' under Executive Order 12866; 
(2) is not a ``significant rule'' under DOT Regulatory Policies and 
Procedures (44 FR 11034, February 26, 1979); and (3) will not have a 
significant economic impact, positive or negative, on a substantial 
number of small entities under the criteria of the Regulatory 
Flexibility Act. A final evaluation has been prepared for this action 
and it is contained in the Rules Docket. A copy of it may be obtained 
from the Rules Docket at the location provided under the caption 
ADDRESSES.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, pursuant to the authority delegated to me by the 
Administrator, the Federal Aviation Administration amends part 39 of 
the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

    1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec. 39.13  [Amended]

    2. Section 39.13 is amended by adding the following new 
airworthiness directive:

98-20-16  Airbus Industrie: Amendment 39-10783. Docket 98-NM-206-AD.

    Applicability: Model A300 series airplanes on which a stowage 
box located forward of galley 2 is installed; and on which Airbus 
Industrie Modification 5105 (Airbus Service Bulletin A300-25-395, 
dated March 22, 1984) has not been accomplished; certificated in any 
category.

    Note 1: This AD applies to each airplane identified in the 
preceding applicability provision, regardless of whether it has been 
otherwise modified, altered, or repaired in the area subject to the 
requirements of this AD. For airplanes that have been modified, 
altered, or repaired so that the performance of the requirements of 
this AD is affected, the owner/operator must request approval for an 
alternative method of compliance in accordance with paragraph (c) of 
this AD. The request should include an assessment of the effect of 
the modification, alteration, or repair on the unsafe condition 
addressed by this AD; and, if the unsafe condition has not been 
eliminated, the request should include specific proposed actions to 
address it.

    Compliance: Required as indicated, unless accomplished 
previously.
    To prevent failure of the struts for the stowage box located 
forward of galley 2, which could result in displacement of the 
stowage box, and possible injury to passengers and flight crew, 
accomplish the following:
    (a) Within 18 months after the effective date of this AD, modify 
the struts for the stowage box located forward of galley 2, in 
accordance with Airbus Service Bulletin A300-25-395, dated March 22, 
1984, as revised by Change Notices OB, dated June 2, 1985, and OC, 
dated June 20, 1988.
    (b) As of the effective date of this AD, no person shall install 
on any airplane a strut, part number (P/N) A2527979620000, on the 
stowage box located forward of galley 2.
    (c) An alternative method of compliance or adjustment of the 
compliance time that provides an acceptable level of safety may be 
used if approved by the Manager, International Branch, ANM-116, FAA, 
Transport Airplane Directorate. Operators shall submit their 
requests through an appropriate FAA Principal Maintenance Inspector, 
who may add comments and then send it to the Manager, International 
Branch, ANM-116.

    Note 2: Information concerning the existence of approved 
alternative methods of compliance with this AD, if any, may be 
obtained from the International Branch, ANM-116.

    (d) Special flight permits may be issued in accordance with 
sections 21.197 and 21.199 of the Federal Aviation Regulations (14 
CFR 21.197 and 21.199) to operate the airplane to a location where 
the requirements of this AD can be accomplished.
    (e) The modification shall be done in accordance with Airbus 
Service Bulletin A300-25-395, dated March 22, 1984, as revised by 
Change Notice OB, dated June 2, 1985, and Change Notice OC, dated 
June 20, 1988. This incorporation by reference was approved by the 
Director of the Federal Register in accordance with 5 U.S.C. 552(a) 
and 1 CFR part 51. Copies may be obtained from Airbus Industrie, 1 
Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France. Copies may 
be inspected at the FAA, Transport Airplane Directorate, 1601 Lind 
Avenue, SW., Renton, Washington; or at the Office of the Federal 
Register, 800 North Capitol Street, NW., suite 700, Washington, DC.

    Note 3: The subject of this AD is addressed in French 
airworthiness directive 97-359-233(B), dated November 19, 1997.

    (f) This amendment becomes effective on October 27, 1998.

    Issued in Renton, Washington, on September 14, 1998.
Dorenda D. Baker,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 98-25122 Filed 9-21-98; 8:45 am]
BILLING CODE 4910-13-U


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:58:18.549149+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
71a816c62c30dfb12cde0fbae712e75ec85a3cf8147560f5eef334442afaa2aa
Text SHA-256
59e9a96a0da5821faa8b322892480d2f824eaa3b4bf5130b61a3e748e79a0c2e

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.