Published 1999-07-20 · Federal Register document 99-18366
Airworthiness Directives; British Aerospace HP137 Mk1, Jetstream Series 200, and Jetstream Models 3101 and 3201 Airplanes
Publication summary
This amendment adopts a new airworthiness directive (AD) that applies to all British Aerospace HP137 Mk1, Jetstream series 200, and Jetstream Models 3101 and 3201 airplanes. This AD requires repetitively removing the nose landing gear steering selector valve and installing either a new nose landing gear steering selector valve or one that has been overhauled in accordance with the appropriate component maintenance manual. This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for the United Kingdom. The actions specified by this AD are intended to prevent the inability to steer the airplane because of wear in the nose landing gear steering selector differential, which could result in loss of control of the airplane during take-off, landing, or taxi operations.
Why this record is shown
Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:22:57.343810+00:00. The title, summary and date are source facts.
- Source revision
- federal_register_ad_metadata_1999-e9a7378e7e7d30d5
- Source row
- results[261]
- Raw source SHA-256
- e9a7378e7e7d30d51578560dc0677c56bb1fef0a9323224e2a0afe1544919217
Final-rule publication
Recorded publication clauses
- AD identifier printed in this edition
- 99-15-11
- Effective date printed in this edition
- 1999-09-10
Some source clauses remain unstructured. Read the complete publication for conditions that have not been interpreted here.
Read 2 complete recorded clauses
Applicability wording · Applicability
Applicability: HP137 Mk1, Jetstream Series 200, and Jetstream
Models 3101 and 3201 airplanes, all serial numbers, certificated in
any category.
Note 1: This AD applies to each airplane identified in the
preceding applicability provision, regardless of whether it has been
modified, altered, or repaired in the area subject to the
requirements of this AD. For airplanes that have been modified,
altered, or repaired so that the performance of the
[[Page 38822]]
requirements of this AD is affected, the owner/operator must request
approval for an alternative method of compliance in accordance with
paragraph (c) of this AD. The request should include an assessment
of the effect of the modification, alteration, or repair on the
unsafe condition addressed by this AD; and, if the unsafe condition
has not been eliminated, the request should include specific
proposed actions to address it.
Exact source excerpt. Text positions 6700–7614, end exclusive, in the original decoded publication. SHA-256: 7caa9ec1ee05e7c90dca61242e5b9a3658646d2548fd726c3f411549eb9fcd37
Compliance and requirements
Compliance: Upon accumulating 10,000 hours time-in-service (TIS)
on the nose landing gear selector valve or within the next 12
calendar months after the effective date of this AD, whichever
occurs later, unless already accomplished; and thereafter each time
10,000 hours TIS is accumulated on a nose landing gear selector
valve.
To prevent the inability to steer the airplane because of wear
in the nose landing gear steering selector differential, which could
result in loss of control of the airplane during take-off, landing,
or taxi operations, accomplish the following:
(a) Remove the nose landing gear steering selector valve, part
number (P/N) 8668C or AIR86002-0 (or FAA-approved equivalent part
number), and install one of the following in accordance with the
applicable maintenance manual, as specified in British Aerospace
Jetstream Service Bulletin 32-JA980841, Original Issue: October 28,
1998:
(1) A new steering selector valve, P/N 8668C or AIR86002-0 (or
FAA-approved equivalent part number); or
(2) An FAA-approved nose landing gear steering selector valve
that has been overhauled in accordance with the appropriate
component maintenance manual.
Note 2: The FAA is requiring in another action (Docket No. 98-
CE-117-AD) a one-time inspection of the nose wheel steering system
to assure that the free play between the steering handle or knob and
the nose wheels is within acceptable limits, with adjustment as
necessary.
(b) Special flight permits may be issued in accordance with
sections 21.197 and 21.199 of the Federal Aviation Regulations (14
CFR 21.197 and 21.199) to operate the airplane to a location where
the requirements of this AD can be accomplished.
(c) An alternative method of compliance or adjustment of the
initial or repetitive compliance times that provides an equivalent
level of safety may be approved by the Manager, Small Airplane
Directorate, Aircraft Certification Service, 1201 Walnut, suite 900,
Kansas City, Missouri 64106. The request shall be forwarded through
an appropriate FAA Maintenance Inspector, who may add comments and
then send it to the Manager, Small Airplane Directorate.
Note 3: Information concerning the existence of approved
alternative methods of compliance with this AD, if any, may be
obtained from the Small Airplane Directorate.
(d) Questions or technical information related to British
Aerospace Jetstream Service Bulletin 32-JA980841, Original Issue:
October 28, 1998, should be directed to British Aerospace Regional
Aircraft, Prestwick International Airport, Ayrshire, KA9 2RW,
Scotland; telephone: (01292) 479888; facsimile: (01292) 479703. This
service information may be examined at the FAA, Central Region,
Office of the Regional Counsel, Room 1558, 601 E. 12th Street,
Kansas City, Missouri 64106.
Note 4: The subject of this AD is addressed in British Aerospace
Jetstream Alert Service Bulletin 32-JA980841, Original Issue:
October 28, 1998. This service bulletin is classified as mandatory
by the United Kingdom Civil Aviation Authority (CAA).
(e) This amendment becomes effective on September 10, 1999.
Exact source excerpt. Text positions 7614–10793, end exclusive, in the original decoded publication. SHA-256: c3c8ee6b0260e797ca5b3b539e936f7079f3ae7e7a35b903a8f4e6894a1a10d0
No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.
Find all recorded historical references to AD 99-15-11 · 0 printed reference observations in this pinned collection.
These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.
Why these observations are shown
They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.
Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: e6569865da10d591d57fee83b7ed4ccc26107950bcdab90993192aa01f222b2f. Source manifest: 0310ecca7d0c87660a8628d025c506ab1cb8f692709e9185db1c7c5b9d639fc8.
Official source · 1999-07-20
Publication text
This is the complete recorded text of this dated publication.
Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.
Read the complete official publication text
[Federal Register Volume 64, Number 138 (Tuesday, July 20, 1999)]
[Rules and Regulations]
[Pages 38821-38822]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 99-18366]
[[Page 38821]]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 98-CE-115-AD; Amendment 39-11231; AD 99-15-11]
RIN 2120-AA64
Airworthiness Directives; British Aerospace HP137 Mk1, Jetstream
Series 200, and Jetstream Models 3101 and 3201 Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: This amendment adopts a new airworthiness directive (AD) that
applies to all British Aerospace HP137 Mk1, Jetstream series 200, and
Jetstream Models 3101 and 3201 airplanes. This AD requires repetitively
removing the nose landing gear steering selector valve and installing
either a new nose landing gear steering selector valve or one that has
been overhauled in accordance with the appropriate component
maintenance manual. This AD is the result of mandatory continuing
airworthiness information (MCAI) issued by the airworthiness authority
for the United Kingdom. The actions specified by this AD are intended
to prevent the inability to steer the airplane because of wear in the
nose landing gear steering selector differential, which could result in
loss of control of the airplane during take-off, landing, or taxi
operations.
DATES: Effective September 10, 1999.
ADDRESSES: This information may be examined at the Federal Aviation
Administration (FAA), Central Region, Office of the Regional Counsel,
Attention: Rules Docket No. 98-CE-115-AD, Room 1558, 601 E. 12th
Street, Kansas City, Missouri 64106.
FOR FURTHER INFORMATION CONTACT: Mr. S.M. Nagarajan, Aerospace
Engineer, FAA, Small Airplane Directorate, 1201 Walnut, suite 900,
Kansas City, Missouri 64106; telephone: (816) 426-6932; facsimile:
(816) 426-2169.
SUPPLEMENTARY INFORMATION:
Events Leading to the Issuance of This AD
A proposal to amend part 39 of the Federal Aviation Regulations (14
CFR part 39) to include an AD that would apply to all British Aerospace
HP137 Mk1, Jetstream series 200, and Jetstream Models 3101 and 3201
airplanes was published in the Federal Register as a notice of proposed
rulemaking (NPRM) on April 23, 1999 (64 FR 19936). The NPRM proposed to
require repetitively removing the nose landing gear steering selector
valve and installing either a new nose landing gear steering selector
valve or one that has been overhauled in accordance with the
appropriate component maintenance manual.
Accomplishment of the proposed action as specified in the NPRM
would be required in accordance with the applicable maintenance manual,
as specified in British Aerospace Jetstream Service Bulletin 32-
JA980841, Original Issue: October 28, 1998.
The FAA is requiring in another action (Docket No. 98-CE-117-AD) a
one-time inspection of the nose wheel steering system to assure that
the free play between the steering handle or knob and the nose wheels
is within acceptable limits, with adjustment as necessary.
The NPRM was the result of mandatory continuing airworthiness
information (MCAI) issued by the airworthiness authority for the United
Kingdom.
Interested persons have been afforded an opportunity to participate
in the making of this amendment. One comment was received in favor of
the NPRM and no comments were received on the FAA's determination of
the cost to the public.
The FAA's Determination
After careful review of all available information related to the
subject presented above, the FAA has determined that air safety and the
public interest require the adoption of the rule as proposed except for
minor editorial corrections. The FAA has determined that these minor
corrections will not change the meaning of the AD and will not add any
additional burden upon the public than was already proposed.
Cost Impact
The FAA estimates that 350 airplanes in the U.S. registry will be
affected by the initial replacement, that it will take approximately 4
workhours per airplane to accomplish this action, and that the average
labor rate is approximately $60 an hour. Parts cost approximately
$2,500 per airplane. Based on these figures, the total cost impact of
the initial replacement on U.S. operators is estimated to be $959,000,
or $2,740 per airplane.
These figures only take into account the cost of the initial
overhaul or replacement and do not take into account the cost of
subsequent overhauls or replacements. The FAA has no way of determining
the number of overhauls or replacements that each owner/operator of the
affected airplanes will incur over the life of his/her airplane.
Regulatory Impact
The regulations adopted herein will not have substantial direct
effects on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government. Therefore, in
accordance with Executive Order 12612, it is determined that this final
rule does not have sufficient federalism implications to warrant the
preparation of a Federalism Assessment.
For the reasons discussed above, I certify that this action (1) is
not a ``significant regulatory action'' under Executive Order 12866;
(2) is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979); and (3) will not have a
significant economic impact, positive or negative, on a substantial
number of small entities under the criteria of the Regulatory
Flexibility Act. A copy of the final evaluation prepared for this
action is contained in the Rules Docket. A copy of it may be obtained
by contacting the Rules Docket at the location provided under the
caption ADDRESSES.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety.
Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the
Administrator, the Federal Aviation Administration amends part 39 of
the Federal Aviation Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. Section 39.13 is amended by adding a new airworthiness directive
(AD) to read as follows:
99-15-11 British Aerospace: Amendment 39-11231; Docket No. 98-CE-
115-AD.
Applicability: HP137 Mk1, Jetstream Series 200, and Jetstream
Models 3101 and 3201 airplanes, all serial numbers, certificated in
any category.
Note 1: This AD applies to each airplane identified in the
preceding applicability provision, regardless of whether it has been
modified, altered, or repaired in the area subject to the
requirements of this AD. For airplanes that have been modified,
altered, or repaired so that the performance of the
[[Page 38822]]
requirements of this AD is affected, the owner/operator must request
approval for an alternative method of compliance in accordance with
paragraph (c) of this AD. The request should include an assessment
of the effect of the modification, alteration, or repair on the
unsafe condition addressed by this AD; and, if the unsafe condition
has not been eliminated, the request should include specific
proposed actions to address it.
Compliance: Upon accumulating 10,000 hours time-in-service (TIS)
on the nose landing gear selector valve or within the next 12
calendar months after the effective date of this AD, whichever
occurs later, unless already accomplished; and thereafter each time
10,000 hours TIS is accumulated on a nose landing gear selector
valve.
To prevent the inability to steer the airplane because of wear
in the nose landing gear steering selector differential, which could
result in loss of control of the airplane during take-off, landing,
or taxi operations, accomplish the following:
(a) Remove the nose landing gear steering selector valve, part
number (P/N) 8668C or AIR86002-0 (or FAA-approved equivalent part
number), and install one of the following in accordance with the
applicable maintenance manual, as specified in British Aerospace
Jetstream Service Bulletin 32-JA980841, Original Issue: October 28,
1998:
(1) A new steering selector valve, P/N 8668C or AIR86002-0 (or
FAA-approved equivalent part number); or
(2) An FAA-approved nose landing gear steering selector valve
that has been overhauled in accordance with the appropriate
component maintenance manual.
Note 2: The FAA is requiring in another action (Docket No. 98-
CE-117-AD) a one-time inspection of the nose wheel steering system
to assure that the free play between the steering handle or knob and
the nose wheels is within acceptable limits, with adjustment as
necessary.
(b) Special flight permits may be issued in accordance with
sections 21.197 and 21.199 of the Federal Aviation Regulations (14
CFR 21.197 and 21.199) to operate the airplane to a location where
the requirements of this AD can be accomplished.
(c) An alternative method of compliance or adjustment of the
initial or repetitive compliance times that provides an equivalent
level of safety may be approved by the Manager, Small Airplane
Directorate, Aircraft Certification Service, 1201 Walnut, suite 900,
Kansas City, Missouri 64106. The request shall be forwarded through
an appropriate FAA Maintenance Inspector, who may add comments and
then send it to the Manager, Small Airplane Directorate.
Note 3: Information concerning the existence of approved
alternative methods of compliance with this AD, if any, may be
obtained from the Small Airplane Directorate.
(d) Questions or technical information related to British
Aerospace Jetstream Service Bulletin 32-JA980841, Original Issue:
October 28, 1998, should be directed to British Aerospace Regional
Aircraft, Prestwick International Airport, Ayrshire, KA9 2RW,
Scotland; telephone: (01292) 479888; facsimile: (01292) 479703. This
service information may be examined at the FAA, Central Region,
Office of the Regional Counsel, Room 1558, 601 E. 12th Street,
Kansas City, Missouri 64106.
Note 4: The subject of this AD is addressed in British Aerospace
Jetstream Alert Service Bulletin 32-JA980841, Original Issue:
October 28, 1998. This service bulletin is classified as mandatory
by the United Kingdom Civil Aviation Authority (CAA).
(e) This amendment becomes effective on September 10, 1999.
Issued in Kansas City, Missouri, on July 13, 1999.
Michael Gallagher,
Manager, Small Airplane Directorate, Aircraft Certification Service.
[FR Doc. 99-18366 Filed 7-19-99; 8:45 am]
BILLING CODE 4910-13-P
Why this text is shown
The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T04:49:11.312615+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.
Open the captured official edition
- Source SHA-256
- f23df0b8902671055df432aa7fd51f2147056330f25093c96617b003f89ae0a6
- Text SHA-256
- e6569865da10d591d57fee83b7ed4ccc26107950bcdab90993192aa01f222b2f
Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence
Coverage and limits
These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.
The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.