Back to publication catalog

Published 2007-09-21 · Federal Register document E7-18472

Airworthiness Directives; Boeing Model 747 Airplanes

Publication summary

The FAA is correcting a typographical error in an existing airworthiness directive (AD) that was published in the Federal Register on July 30, 2007 (72 FR 41438). The error resulted in certain compliance times being mislabeled as units of flight cycles instead of flight hours. This AD applies to all Boeing Model 747 airplanes. This AD requires an inspection of the No. 2 and No. 3 windows on the left and right sides of the airplane to determine their part numbers, and related investigative and corrective actions if necessary.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:23.906952+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2007-daaa03e810180273
Source row
results[347]
Raw source SHA-256
daaa03e81018027354d93b79e2a5f918dd4e1ce116086c5ab24f0dfd782528aa

Correction notice · separate source edition

Recorded publication clauses

AD identifier printed in this edition
2007-15-10
Effective date printed in this edition
Unknown

This correction is a separate source edition; it is not counted as a new adopted rule.

No adopted-clause structure was recorded for this source edition. Read the complete text; no applicability conclusion has been inferred.

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2007-15-10 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 4a55c8f70a9db4c802a519f78ca9d0a513b7e45c8e24eec8940ec9e6b5f248d0. Source manifest: 5f74bd8e8105b8ade04aa32a67012ab5459039c3c56ea43943cd9bc80ca98cb9.

Official source · 2007-09-21

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 72, Number 183 (Friday, September 21, 2007)]
[Rules and Regulations]
[Page 53923]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E7-18472]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2006-26441; Directorate Identifier 2006-NM-204-AD; 
Amendment 39-15139; AD 2007-15-10]
RIN 2120-AA64


Airworthiness Directives; Boeing Model 747 Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: The FAA is correcting a typographical error in an existing 
airworthiness directive (AD) that was published in the Federal Register 
on July 30, 2007 (72 FR 41438). The error resulted in certain 
compliance times being mislabeled as units of flight cycles instead of 
flight hours. This AD applies to all Boeing Model 747 airplanes. This 
AD requires an inspection of the No. 2 and No. 3 windows on the left 
and right sides of the airplane to determine their part numbers, and 
related investigative and corrective actions if necessary.

DATES: Effective September 21, 2007.

ADDRESSES: The AD docket contains the proposed AD, comments, and any 
final disposition. You may examine the AD docket on the Internet at 
http://dms.dot.gov, or in person at the Docket Operations office 
between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The Docket Operations office (telephone (800) 647-5527) is 
located on the ground level of the West Building at the DOT street 
address stated in the ADDRESSES section. This docket number is FAA-
2006-26441; the directorate identifier for this docket is 2006-NM-204-
AD.

FOR FURTHER INFORMATION CONTACT: Steve Fox, Aerospace Engineer, 
Airframe Branch, ANM-120S, FAA, Seattle Aircraft Certification Office, 
1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425) 
917-6425; fax (425) 917-6590.

SUPPLEMENTARY INFORMATION: On July 18, 2007, the FAA issued AD 2007-15-
10, amendment 39-15139 (72 FR 41438, July 30, 2007), for all Boeing 
Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 
747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series 
airplanes. The AD requires an inspection of the No. 2 and No. 3 windows 
on the left and right sides of the airplane to determine their part 
numbers, and related investigative and corrective actions if necessary.
    As published, the compliance times in paragraph (g) of AD 2007-15-
10 were mislabeled as units of flight cycles instead of flight hours.
    No other part of the regulatory information has been changed; 
therefore, the final rule is not republished in the Federal Register.
    The effective date of this AD remains September 4, 2007.


Sec.  39.13  [Corrected]

0
In the Federal Register of July 30, 2007, on page 41441, in the 2nd 
column, paragraph (g) of AD 2007-15-10 is corrected to read as follows:
* * * * *
    (g) Where Tables 1, 2, and 3 of paragraph 1.E. of Boeing Alert 
Service Bulletin 747-56A2012, dated August 24, 2006, specify counting 
the compliance time from ``* * * after the date on this service 
bulletin,'' this AD requires counting the compliance time from the 
effective date of this AD. After replacing a discrepant window with a 
new window, do the initial detailed inspection of the new window at the 
applicable compliance time: (1) within 5,500 flight hours after 
installing part number (P/N) 65B27042-( ) or 65B27043-( ), or (2) 
within 22,000 flight hours after installing P/N 65B27046-( ) or 
65B27047-( ).
* * * * *

    Issued in Renton, Washington, on September 10, 2007.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
 [FR Doc. E7-18472 Filed 9-20-07; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:35:59.396971+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
ded8a6554dc354447e00b8c4122e0bc7c5fda0b528a13dee3441fe2d2cb5f090
Text SHA-256
4a55c8f70a9db4c802a519f78ca9d0a513b7e45c8e24eec8940ec9e6b5f248d0

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.