Airworthiness Directives; Pacific Aerospace Corporation Ltd Model 750XL Airplanes

[Federal Register Volume 72, Number 45 (Thursday, March 8, 2007)]
[Rules and Regulations]
[Pages 10349-10350]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E7-4130]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2006-26285; Directorate Identifier 2006-CE-69-AD; 
Amendment 39-14932; AD 2007-04-01]
RIN 2120-AA64


Airworthiness Directives; Pacific Aerospace Corporation Ltd Model 
750XL Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: This document makes a correction to Airworthiness Directive 
(AD) 2007-04-01, which was published in the Federal Register on 
February 14, 2007 (72 FR 6931), and applies to certain Pacific 
Aerospace Corporation Ltd Model 750XL airplanes. AD 2007-04-01 requires 
that you inspect the rivets in the fuselage roof at STN 180.85, BL 
19.67, WL 86.2, and replace undersize rivets. Current language in Sec.  
39.13 [Amended] of AD 2007-04-01 references ``* * *'' instead of 
``2007-04-01.'' This document corrects that paragraph by changing the 
reference from ``* * *'' to ``2007-04-01.''

DATES: The effective date of this AD (2007-04-01) remains March 21, 
2007.

FOR FURTHER INFORMATION CONTACT: Karl Schletzbaum, Aerospace Engineer, 
FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, 
Missouri 64106; telephone: (816) 329-4146; fax: (816) 329-4090.

SUPPLEMENTARY INFORMATION: 

Discussion

    On February 5, 2007, the FAA issued AD 2007-04-01, Amendment 39-
14932 (72 FR 6931, February 14, 2007), which applies to certain Pacific 
Aerospace

[[Page 10350]]

Corporation Ltd Model 750XL airplanes. AD 2007-04-01 requires you to 
inspect the rivets in the fuselage roof at STN 180.85, BL 19.67, WL 
86.2, and replace undersize rivets. Current language in Sec.  39.13 
[Amended] of AD 2007-04-01 references ``* * *'' instead of ``2007-04-
01.''

Need for the Correction

    This correction is needed to specify the correct AD number (2007-
04-01) for AD 2007-04-01.

Correction of Publication

0
Accordingly, the publication of February 14, 2007 (72 FR 6931), of 
Amendment 39-14932; AD 2007-04-01, which was the subject of FR Doc. E7-
2318, is corrected as follows:

Section 39.13 [Corrected]

0
On page 6932, in the second column, in Sec.  39.13 [Amended], in the 
third line, remove ``* * *'' and add ``2007-04-01'' in its place.
0
Action is taken herein to correct this reference in AD 2007-04-01 and 
to add this AD correction to section 39.13 of the Federal Aviation 
Regulations (14 CFR 39.13).
    The effective date remains March 21, 2007.

    Issued in Kansas City, Missouri, on March 2, 2007.
Kim Smith,
Manager, Small Airplane Directorate, Aircraft Certification Service.
 [FR Doc. E7-4130 Filed 3-7-07; 8:45 am]
BILLING CODE 4910-13-P

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:39:52.140727+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256

3876fe689e6a6bc784a1074ce4a4ba3ff92ef508b11810a5d5d83da8a66d7988

Text SHA-256

86d735a4ad95d38d0bf7c33f7e639620d61e4cc6f8029c4ade6737608ed51dd3