Back to publication catalog

Published 2009-06-11 · Federal Register document E9-13138

Airworthiness Directives; Construcciones Aeronauticas, S.A. (CASA), Model C-212-CB, C-212-CC, C-212-CD, C-212-CE, C-212-CF, and C-212-DE Airplanes

Publication summary

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:30.011257+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2009-cb57e588bd107238
Source row
results[149]
Raw source SHA-256
cb57e588bd10723805ef0ea28ddc0685de14711012023c7e7d12178879efaeed

Final-rule publication

Recorded publication clauses

AD identifier printed in this edition
2009-12-04
Effective date printed in this edition
2009-07-16
Read 9 complete recorded clauses
Effective Date
Effective Date

    (a) This airworthiness directive (AD) becomes effective July 16, 
2009.

Exact source excerpt. Text positions 9241–9334, end exclusive, in the original decoded publication. SHA-256: 21d74ed80b7bc1a0051447646923610a4bbf082b057a54bb3321c0ea8bed3890

Affected ADs
Affected ADs

    (b) None.

Exact source excerpt. Text positions 9334–9363, end exclusive, in the original decoded publication. SHA-256: 027fbc44617399472b6ac4741da3aee18448654374228bcf4fe3f01df6b1539b

Applicability wording · Applicability
Applicability

    (c) This AD applies to CASA Model C-212-CB, C-212-CC, C-212-CD, 
C-212-CE, C-212-CF, and C-212-DE airplanes, all serial numbers; 
certificated in any category; on which pitot tubes having part 
number 212-61105.1 or 212-61105.2 are installed.

Exact source excerpt. Text positions 9363–9626, end exclusive, in the original decoded publication. SHA-256: 08e2bd091dc1f89f355e24d85c20e22808e89ff28f2efb2c3bd59414e0df4feb

Subject
Subject

    (d) Air Transport Association (ATA) of America Code 34: 
Navigation.

Exact source excerpt. Text positions 9626–9709, end exclusive, in the original decoded publication. SHA-256: 3a164d7e73d4bdcc59c6dec90ef4aa0fb8c86b1b591b86e5633dc3381bb33e59

Reason
Reason

    (e) The mandatory continuing airworthiness information (MCAI) 
states:

    ``Incidents have been reported on Britten-Norman BN-2 aircraft, 
where cracks were found in the inner shell of the pitot/static 
pressure heads. The investigation concluded that these pitot tubes, 
supplied by Thales Optronics, could be operated outside their 
voltage specification. On December 15th, 2005, CAA [Civil Aviation 
Authority] United Kingdom issued AD G-2005-0034 (EASA approval 
number 2005-6447), later superseded by EASA AD 2006-0143, to require 
inspections and leak tests on Britten-Norman aircraft. Subsequently, 
it has been discovered that the same tubes are supplied to EADS-CASA 
for installation on C-212 aircraft, one for the pilot side and one 
for the co-pilot side. So far, EADS-CASA has not received any report 
of cracked pitot tubes from C-212 operators.
    ``This condition, if not corrected, could result in incorrect 
readings on the pressure instrumentation, e.g., altimeters, vertical 
speed indicators (rate of climb) and airspeed indicators, 
potentially leading to navigational errors.
    ``For the reasons described above, this EASA AD requires the 
inspection of the affected pitot tubes, and, if cracks are found, 
replacement of those tubes with the new P/N [part number] 212-A0150-
0001 and 212-A0150-0002 pitot tubes.

The unsafe condition could reduce the ability of the flightcrew to 
maintain the safe flight and landing of the airplane.

Exact source excerpt. Text positions 9709–11186, end exclusive, in the original decoded publication. SHA-256: 801d6ee445b8efb6be30e0414d98630fdf92b6aca0f615c92e0e4411285ede75

Actions and Compliance
Actions and Compliance

    (f) Unless already done, do the following actions.
    (1) Within 1 month or 300 flight hours after the effective date 
of this AD, whichever occurs first: Perform a detailed inspection of 
the affected pitot tubes and static inlets for radial cracking 
around the top lip of the dynamic port, in accordance with the 
instructions of Chapter 5 of the CASA C-212 Series 100/200 
Maintenance Manual, Revision 2, dated June 11, 2002. Repeat the 
inspection thereafter at intervals not to exceed 300 flight hours.
    (2) If any crack is found during any inspection required by 
paragraph (f)(1) of this AD, before further flight, replace the 
pitot tube with a new pitot tube having P/N 212-A0150-0001 or 212-
A0150-0002 in accordance with the instructions of CASA Service 
Bulletin SB-212-34-11, Revision 1, dated February 27, 2008. 
Replacement of both pitot tubes having part number 212-61105.1 and 
212-61105.2 with new tubes terminates the repetitive inspections 
required by paragraph (f)(1) of this AD.

FAA AD Differences

    Note:  This AD differs from the MCAI and/or service information 
as follows: No differences.

Exact source excerpt. Text positions 11186–12340, end exclusive, in the original decoded publication. SHA-256: b3149490548ed59d6a2af4b5331c855a9c7089502a831f5ff543a33fb108dc0d

Other FAA AD Provisions
Other FAA AD Provisions

    (g) The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International

[[Page 27704]]

Branch, ANM-116, FAA, has the authority to approve AMOCs for this 
AD, if requested using the procedures found in 14 CFR 39.19. Send 
information to Attn: Shahram Daneshmandi, Aerospace Engineer, 
International Branch, ANM-116, Transport Airplane Directorate, FAA, 
1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone 
(425) 227-1112; fax (425) 227-1149. Before using any approved AMOC 
on any airplane to which the AMOC applies, notify your appropriate 
principal inspector (PI) in the FAA Flight Standards District Office 
(FSDO), or lacking a PI, your local FSDO.
    (2) Airworthy Product: For any requirement in this AD to obtain 
corrective actions from a manufacturer or other source, use these 
actions if they are FAA-approved. Corrective actions are considered 
FAA-approved if they are approved by the State of Design Authority 
(or their delegated agent). You are required to assure the product 
is airworthy before it is returned to service.
    (3) Reporting Requirements: For any reporting requirement in 
this AD, under the provisions of the Paperwork Reduction Act, the 
Office of Management and Budget (OMB) has approved the information 
collection requirements and has assigned OMB Control Number 2120-
0056.

Exact source excerpt. Text positions 12340–13758, end exclusive, in the original decoded publication. SHA-256: 44ddae3aa53cb95ecf165ef115552eeee61d0bc0b9e76a248c9677ac8d395cec

Related Information
Related Information

    (h) Refer to MCAI European Aviation Safety Agency Airworthiness 
Directive 2008-0155, dated August 11, 2008; Chapter 5 of the CASA C-
212 Series 100/200 Maintenance Manual, Revision 2, dated June 11, 
2002; and CASA Service Bulletin SB-212-34-11, Revision 1, dated 
February 27, 2008; for related information.

Exact source excerpt. Text positions 13758–14094, end exclusive, in the original decoded publication. SHA-256: a0e801e28c51f426a0249504c3f87cb50fed834ccca84f908c8bb78b4bba01d3

Material Incorporated by Reference
Material Incorporated by Reference

    (i) You must use Chapter 5 of the CASA C-212 Series 100/200 
Maintenance Manual, Revision 2, dated June 11, 2002; and CASA 
Service Bulletin SB-212-34-11, Revision 1, dated February 27, 2008; 
as applicable; to do the actions required by this AD, unless the AD 
specifies otherwise. The CASA C-212 Series 100/200 Maintenance 
Manual, Revision 2, dated June 11, 2002, contains the following 
effective pages:

                                             List of Effective Pages
----------------------------------------------------------------------------------------------------------------
       Page title/description             Page number(s)          Revision number        Date shown on page(s)
----------------------------------------------------------------------------------------------------------------
Title Page..........................  None shown............  2.....................  June 11, 2002.
Record of Revisions.................  None shown............  2.....................  June 11, 2002.
Chapter 5: List of Effectivity Pages  1.....................  None shown*...........  June 11, 2002.
Chapter 5: Table of Contents........  1-4...................  None shown*...........  May 25, 1988.
Section 5-00-00.....................  1-6...................  None shown*...........  May 25, 1988.
Section 5-10-00.....................  1-4...................  None shown*...........  May 25, 1988.
                                      5-7, 9, 10............  None shown*...........  June 11, 2002.
                                      8, 11-15..............  None shown*...........  July 22, 1993.
Section 5-20-00.....................  1-4...................  None shown*...........  May 25, 1988.
                                      5-13, 16, 19-31, 34-    None shown*...........  July 22, 1993.
                                       45, 47-62, 64, 66-90.
                                      14, 15, 17, 18, 32,     None shown*...........  June 11, 2002.
                                       33, 46, 63, 65.
Section 5-50-10.....................  1-10..................  None shown*...........  May 25, 1988.
Section 5-50-20.....................  1, 2..................  None shown*...........  May 25, 1988.
----------------------------------------------------------------------------------------------------------------
(*Only the title page and Record of Revisions for the CASA C-212-100/200 Maintenance Manual specify the revision
  level of the document.)

    (1) The Director of the Federal Register approved the 
incorporation by reference of this service information under 5 
U.S.C. 552(a) and 1 CFR part 51.
    (2) For service information identified in this AD, contact EADS-
CASA, Military Transport Aircraft Division (MTAD), Integrated 
Customer Services (ICS), Technical Services, Avenida de 
Arag[oacute]n 404, 28022 Madrid, Spain; telephone +34 91 585 55 84; 
fax +34 91 585 55 05; e-mail [email protected]; 
Internet http://www.eads.net.
    (3) You may review copies of the service information at the FAA, 
Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, 
Washington. For information on the availability of this material at 
the FAA, call 425-227-1221 or 425-227-1152.
    (4) You may also review copies of the service information that 
is incorporated by reference at the National Archives and Records 
Administration (NARA). For information on the availability of this 
material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

Exact source excerpt. Text positions 14094–17704, end exclusive, in the original decoded publication. SHA-256: 603465752a4b9d4f83c37fe4639ac5c4d7ea83294375bc4109057ade303acc60

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2009-12-04 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: 528e242ca5dadad8d4dbd8d8a38285e999da318b3188d733b0d5750c3e7778f9. Source manifest: f3fe86e4d871d2c6bb89efc205010c16663d10172de81a085d239a02ef043ebd.

Official source · 2009-06-11

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 74, Number 111 (Thursday, June 11, 2009)]
[Rules and Regulations]
[Pages 27702-27704]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E9-13138]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2009-0005; Directorate Identifier 2008-NM-164-AD; 
Amendment 39-15927; AD 2009-12-04]
RIN 2120-AA64


Airworthiness Directives; Construcciones Aeronauticas, S.A. 
(CASA), Model C-212-CB, C-212-CC, C-212-CD, C-212-CE, C-212-CF, and C-
212-DE Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for the 
products listed above. This AD results from mandatory continuing 
airworthiness information (MCAI) originated by an aviation authority of 
another country to identify and correct an unsafe condition on an 
aviation product. The MCAI describes the unsafe condition as:

    Incidents have been reported on Britten-Norman BN-2 aircraft, 
where cracks were found in the inner shell of the pitot/static 
pressure heads. The investigation concluded that these pitot tubes, 
supplied by Thales Optronics, could be operated outside their 
voltage specification. On December 15th, 2005, CAA [Civil Aviation 
Authority] United Kingdom issued AD G-2005-0034 (EASA approval 
number 2005-6447), later superseded by EASA AD 2006-0143, to require 
inspections and leak tests on Britten-Norman aircraft. Subsequently, 
it has been discovered that the same tubes are supplied to EADS-CASA 
for installation on C-212 aircraft, one for the pilot side and one 
for the co-pilot side. So far, EADS-CASA has not received any report 
of cracked pitot tubes from C-212 operators.
    This condition, if not corrected, could result in incorrect 
readings on the pressure instrumentation, e.g., altimeters, vertical 
speed indicators (rate of climb) and airspeed indicators, 
potentially leading to navigational errors.
* * * * *

The unsafe condition could reduce the ability of the flightcrew to 
maintain the safe flight and landing of the airplane. We are issuing 
this AD to require actions to correct the unsafe condition on these 
products.

DATES: This AD becomes effective July 16, 2009.
    The Director of the Federal Register approved the incorporation by 
reference of certain publications listed in this AD as of July 16, 
2009.

ADDRESSES: You may examine the AD docket on the Internet at http://www.regulations.gov or in person at the U.S. Department of 
Transportation, Docket Operations, M-30, West Building Ground Floor, 
Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC.

FOR FURTHER INFORMATION CONTACT: Shahram Daneshmandi, Aerospace 
Engineer, International Branch, ANM-116, Transport Airplane 
Directorate, FAA, 1601 Lind Avenue, SW., Renton, Washington 98057-3356; 
telephone (425) 227-1112; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION: 

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 to include an AD that would apply to the specified products. 
That NPRM was published in the Federal Register on February 23, 2009 
(74 FR 8043). That NPRM proposed to correct an unsafe condition for the 
specified products. The MCAI states:

    Incidents have been reported on Britten-Norman BN-2 aircraft, 
where cracks were found in the inner shell of the pitot/static 
pressure heads. The investigation concluded that these pitot tubes, 
supplied by Thales Optronics, could be operated outside their 
voltage specification. On December 15th, 2005, CAA [Civil Aviation 
Authority] United Kingdom issued AD G-2005-0034 (EASA approval 
number 2005-6447), later superseded by EASA AD 2006-0143, to require 
inspections and leak tests on Britten-Norman aircraft. Subsequently, 
it has been discovered that the same tubes are supplied to EADS-CASA 
for installation on C-212 aircraft, one for the pilot side and one 
for the co-pilot side. So far, EADS-CASA has not received any report 
of cracked pitot tubes from C-212 operators.
    This condition, if not corrected, could result in incorrect 
readings on the pressure instrumentation, e.g., altimeters, vertical 
speed indicators (rate of climb) and airspeed indicators, 
potentially leading to navigational errors.
    For the reasons described above, this EASA AD requires the 
inspection of the affected pitot tubes, and, if cracks are found, 
replacement of those tubes with the new P/N [part number] 212-A0150-
0001 and 212-A0150-0002 pitot tubes.

The unsafe condition could reduce the ability of the flightcrew to 
maintain the safe flight and landing of the airplane. You may obtain 
further information by examining the MCAI in the AD docket.

Comments

    We gave the public the opportunity to participate in developing 
this AD. We received no comments on the NPRM or on the determination of 
the cost to the public.

Conclusion

    We reviewed the available data and determined that air safety and 
the public interest require adopting the AD as proposed.

[[Page 27703]]

Differences Between This AD and the MCAI or Service Information

    We have reviewed the MCAI and related service information and, in 
general, agree with their substance. But we might have found it 
necessary to use different words from those in the MCAI to ensure the 
AD is clear for U.S. operators and is enforceable. In making these 
changes, we do not intend to differ substantively from the information 
provided in the MCAI and related service information.
    We might also have required different actions in this AD from those 
in the MCAI in order to follow our FAA policies. Any such differences 
are highlighted in a NOTE within the AD.

Costs of Compliance

    We estimate that this AD will affect 32 products of U.S. registry. 
We also estimate that it will take about 1 work-hour per product to 
comply with the basic requirements of this AD. The average labor rate 
is $80 per work-hour. Based on these figures, we estimate the cost of 
this AD to the U.S. operators to be $2,560, or $80 per product.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
Requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this AD will not have federalism implications 
under Executive Order 13132. This AD will not have a substantial direct 
effect on the States, on the relationship between the national 
government and the States, or on the distribution of power and 
responsibilities among the various levels of government.
    For the reasons discussed above, I certify this AD:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979); and
    3. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.
    We prepared a regulatory evaluation of the estimated costs to 
comply with this AD and placed it in the AD docket.

Examining the AD Docket

    You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Operations office 
between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The AD docket contains the NPRM, the regulatory evaluation, 
any comments received, and other information. The street address for 
the Docket Operations office (telephone (800) 647-5527) is in the 
ADDRESSES section. Comments will be available in the AD docket shortly 
after receipt.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

0
Accordingly, under the authority delegated to me by the Administrator, 
the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new AD:

2009-12-04 Construcciones Aeronauticas, S.A. (CASA): Amendment 39-
15927. Docket No. FAA-2009-0005; Directorate Identifier 2008-NM-164-
AD.

Effective Date

    (a) This airworthiness directive (AD) becomes effective July 16, 
2009.

Affected ADs

    (b) None.

Applicability

    (c) This AD applies to CASA Model C-212-CB, C-212-CC, C-212-CD, 
C-212-CE, C-212-CF, and C-212-DE airplanes, all serial numbers; 
certificated in any category; on which pitot tubes having part 
number 212-61105.1 or 212-61105.2 are installed.

Subject

    (d) Air Transport Association (ATA) of America Code 34: 
Navigation.

Reason

    (e) The mandatory continuing airworthiness information (MCAI) 
states:

    ``Incidents have been reported on Britten-Norman BN-2 aircraft, 
where cracks were found in the inner shell of the pitot/static 
pressure heads. The investigation concluded that these pitot tubes, 
supplied by Thales Optronics, could be operated outside their 
voltage specification. On December 15th, 2005, CAA [Civil Aviation 
Authority] United Kingdom issued AD G-2005-0034 (EASA approval 
number 2005-6447), later superseded by EASA AD 2006-0143, to require 
inspections and leak tests on Britten-Norman aircraft. Subsequently, 
it has been discovered that the same tubes are supplied to EADS-CASA 
for installation on C-212 aircraft, one for the pilot side and one 
for the co-pilot side. So far, EADS-CASA has not received any report 
of cracked pitot tubes from C-212 operators.
    ``This condition, if not corrected, could result in incorrect 
readings on the pressure instrumentation, e.g., altimeters, vertical 
speed indicators (rate of climb) and airspeed indicators, 
potentially leading to navigational errors.
    ``For the reasons described above, this EASA AD requires the 
inspection of the affected pitot tubes, and, if cracks are found, 
replacement of those tubes with the new P/N [part number] 212-A0150-
0001 and 212-A0150-0002 pitot tubes.

The unsafe condition could reduce the ability of the flightcrew to 
maintain the safe flight and landing of the airplane.

Actions and Compliance

    (f) Unless already done, do the following actions.
    (1) Within 1 month or 300 flight hours after the effective date 
of this AD, whichever occurs first: Perform a detailed inspection of 
the affected pitot tubes and static inlets for radial cracking 
around the top lip of the dynamic port, in accordance with the 
instructions of Chapter 5 of the CASA C-212 Series 100/200 
Maintenance Manual, Revision 2, dated June 11, 2002. Repeat the 
inspection thereafter at intervals not to exceed 300 flight hours.
    (2) If any crack is found during any inspection required by 
paragraph (f)(1) of this AD, before further flight, replace the 
pitot tube with a new pitot tube having P/N 212-A0150-0001 or 212-
A0150-0002 in accordance with the instructions of CASA Service 
Bulletin SB-212-34-11, Revision 1, dated February 27, 2008. 
Replacement of both pitot tubes having part number 212-61105.1 and 
212-61105.2 with new tubes terminates the repetitive inspections 
required by paragraph (f)(1) of this AD.

FAA AD Differences

    Note:  This AD differs from the MCAI and/or service information 
as follows: No differences.

Other FAA AD Provisions

    (g) The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International

[[Page 27704]]

Branch, ANM-116, FAA, has the authority to approve AMOCs for this 
AD, if requested using the procedures found in 14 CFR 39.19. Send 
information to Attn: Shahram Daneshmandi, Aerospace Engineer, 
International Branch, ANM-116, Transport Airplane Directorate, FAA, 
1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone 
(425) 227-1112; fax (425) 227-1149. Before using any approved AMOC 
on any airplane to which the AMOC applies, notify your appropriate 
principal inspector (PI) in the FAA Flight Standards District Office 
(FSDO), or lacking a PI, your local FSDO.
    (2) Airworthy Product: For any requirement in this AD to obtain 
corrective actions from a manufacturer or other source, use these 
actions if they are FAA-approved. Corrective actions are considered 
FAA-approved if they are approved by the State of Design Authority 
(or their delegated agent). You are required to assure the product 
is airworthy before it is returned to service.
    (3) Reporting Requirements: For any reporting requirement in 
this AD, under the provisions of the Paperwork Reduction Act, the 
Office of Management and Budget (OMB) has approved the information 
collection requirements and has assigned OMB Control Number 2120-
0056.

Related Information

    (h) Refer to MCAI European Aviation Safety Agency Airworthiness 
Directive 2008-0155, dated August 11, 2008; Chapter 5 of the CASA C-
212 Series 100/200 Maintenance Manual, Revision 2, dated June 11, 
2002; and CASA Service Bulletin SB-212-34-11, Revision 1, dated 
February 27, 2008; for related information.

Material Incorporated by Reference

    (i) You must use Chapter 5 of the CASA C-212 Series 100/200 
Maintenance Manual, Revision 2, dated June 11, 2002; and CASA 
Service Bulletin SB-212-34-11, Revision 1, dated February 27, 2008; 
as applicable; to do the actions required by this AD, unless the AD 
specifies otherwise. The CASA C-212 Series 100/200 Maintenance 
Manual, Revision 2, dated June 11, 2002, contains the following 
effective pages:

                                             List of Effective Pages
----------------------------------------------------------------------------------------------------------------
       Page title/description             Page number(s)          Revision number        Date shown on page(s)
----------------------------------------------------------------------------------------------------------------
Title Page..........................  None shown............  2.....................  June 11, 2002.
Record of Revisions.................  None shown............  2.....................  June 11, 2002.
Chapter 5: List of Effectivity Pages  1.....................  None shown*...........  June 11, 2002.
Chapter 5: Table of Contents........  1-4...................  None shown*...........  May 25, 1988.
Section 5-00-00.....................  1-6...................  None shown*...........  May 25, 1988.
Section 5-10-00.....................  1-4...................  None shown*...........  May 25, 1988.
                                      5-7, 9, 10............  None shown*...........  June 11, 2002.
                                      8, 11-15..............  None shown*...........  July 22, 1993.
Section 5-20-00.....................  1-4...................  None shown*...........  May 25, 1988.
                                      5-13, 16, 19-31, 34-    None shown*...........  July 22, 1993.
                                       45, 47-62, 64, 66-90.
                                      14, 15, 17, 18, 32,     None shown*...........  June 11, 2002.
                                       33, 46, 63, 65.
Section 5-50-10.....................  1-10..................  None shown*...........  May 25, 1988.
Section 5-50-20.....................  1, 2..................  None shown*...........  May 25, 1988.
----------------------------------------------------------------------------------------------------------------
(*Only the title page and Record of Revisions for the CASA C-212-100/200 Maintenance Manual specify the revision
  level of the document.)

    (1) The Director of the Federal Register approved the 
incorporation by reference of this service information under 5 
U.S.C. 552(a) and 1 CFR part 51.
    (2) For service information identified in this AD, contact EADS-
CASA, Military Transport Aircraft Division (MTAD), Integrated 
Customer Services (ICS), Technical Services, Avenida de 
Arag[oacute]n 404, 28022 Madrid, Spain; telephone +34 91 585 55 84; 
fax +34 91 585 55 05; e-mail [email protected]; 
Internet http://www.eads.net.
    (3) You may review copies of the service information at the FAA, 
Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, 
Washington. For information on the availability of this material at 
the FAA, call 425-227-1221 or 425-227-1152.
    (4) You may also review copies of the service information that 
is incorporated by reference at the National Archives and Records 
Administration (NARA). For information on the availability of this 
material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

    Issued in Renton, Washington, on June 1, 2009.
Stephen P. Boyd,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. E9-13138 Filed 6-10-09; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:23:33.679961+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
9686c60884a94823ad33c2100098f1b79affd825f8efd5a02e576b1ec017cce4
Text SHA-256
528e242ca5dadad8d4dbd8d8a38285e999da318b3188d733b0d5750c3e7778f9

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.