Back to publication catalog

Published 2009-09-02 · Federal Register document E9-21039

Airworthiness Directives; BAE Systems (Operations) Limited Model BAe 146-100A and 146-200A Series Airplanes

Publication summary

The FAA is correcting a typographical error in an existing airworthiness directive (AD) that was published in the Federal Register on July 29, 2009. The error resulted in an incorrect AD number appearing in one location of the document. This AD applies to certain BAE Systems (Operations) Limited Model BAe 146-100A and 146-200A series airplanes. This AD requires inspecting for damage of the horizontal stabilizer lower skin and joint plates, and doing related investigative and corrective actions.

Why this record is shown

Source: Federal Register annual FAA metadata. Acquired 2026-09-03T22:23:30.011257+00:00. The title, summary and date are source facts.

Source revision
federal_register_ad_metadata_2009-cb57e588bd107238
Source row
results[232]
Raw source SHA-256
cb57e588bd10723805ef0ea28ddc0685de14711012023c7e7d12178879efaeed

Correction notice · separate source edition

Recorded publication clauses

AD identifier printed in this edition
2009-15-19
Effective date printed in this edition
Unknown

This correction is a separate source edition; it is not counted as a new adopted rule.

No adopted-clause structure was recorded for this source edition. Read the complete text; no applicability conclusion has been inferred.

No replacement link has been established from this edition. The complete historical rule chain and current legal effect remain unknown.

Find all recorded historical references to AD 2009-15-19 · 0 printed reference observations in this pinned collection.

These are observations from one dated publication. Current legal status is unknown; aircraft applicability, installed configuration, compliance and burden require separate evidence. Missing or unparsed conditions remain unknown.

Why these observations are shown

They were extracted offline from the same immutable official HTML source as the complete recorded text. The dated source wording, original text coordinates and exact quote digests are retained. PDF/text agreement and current regulatory effect have not been qualified.

Observation revision: whole-ad-publication-clause-observations-1.0.1. Text SHA-256: c61e2875f7641f5057e12cb9373a49e0bc1e8bd43cf883c416e59e3c08b0ba6f. Source manifest: 16d142f8c756fbf2b2ba8735c4892b5c84e4d9ef12a76551b1da14c3b3b9a70d.

Official source · 2009-09-02

Publication text

This is the complete recorded text of this dated publication.

Current legal effect is unknown. Aircraft applicability, installed configuration and compliance require separate evidence. PDF/text agreement has not been evaluated.

Read the complete official publication text
[Federal Register Volume 74, Number 169 (Wednesday, September 2, 2009)]
[Rules and Regulations]
[Page 45311]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E9-21039]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2009-0432; Directorate Identifier 2008-NM-168-AD; 
Amendment 39-15982; AD 2009-15-19]
RIN 2120-AA64


Airworthiness Directives; BAE Systems (Operations) Limited Model 
BAe 146-100A and 146-200A Series Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: The FAA is correcting a typographical error in an existing 
airworthiness directive (AD) that was published in the Federal Register 
on July 29, 2009. The error resulted in an incorrect AD number 
appearing in one location of the document. This AD applies to certain 
BAE Systems (Operations) Limited Model BAe 146-100A and 146-200A series 
airplanes. This AD requires inspecting for damage of the horizontal 
stabilizer lower skin and joint plates, and doing related investigative 
and corrective actions.

DATES: Effective September 2, 2009.

ADDRESSES: You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Management Facility 
between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The AD docket contains this AD, the regulatory evaluation, 
any comments received, and other information. The address for the 
Docket Office (telephone 800-647-5527) is the Document Management 
Facility, U.S. Department of Transportation, Docket Operations, M-30, 
West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., 
Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Todd Thompson, Aerospace Engineer, 
International Branch, ANM-116, Transport Airplane Directorate, FAA, 
1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425) 
227-1175; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION: On July 13, 2009, the FAA issued AD 2009-15-
19, amendment 39-15982 (74 FR 37528, July 29, 2009), for certain BAE 
Systems (Operations) Limited Model BAe 146-100A and 146-200A series 
airplanes. This AD requires inspecting for damage of the horizontal 
stabilizer lower skin and joint plates, and doing related investigative 
and corrective actions.
    As published, the final rule incorrectly specified the AD number in 
a single location in the AD as ``2008-15-19'' instead of ``2009-15-
19.''
    No other part of the regulatory information has been changed; 
therefore, the final rule is not republished in the Federal Register.
    The effective date of this AD remains September 2, 2009.


Sec.  39.13  [Corrected]

0
In the Federal Register of July 29, 2009, on page 37529, in the first 
column, paragraph 2. of PART 39--AIRWORTHINESS DIRECTIVES is corrected 
to read as follows:
* * * * *
2009-15-19 BAE Systems (Operations) Limited (Formerly British 
Aerospace Regional Aircraft): Amendment 39-15982. Docket No. FAA-
2009-0432; Directorate Identifier 2008-NM-168-AD.
* * * * *

    Issued in Renton, Washington, on August 24, 2009.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. E9-21039 Filed 9-1-09; 8:45 am]
BILLING CODE 4910-13-P


Why this text is shown

The complete text was extracted from the official GovInfo HTML edition for this publication. Acquired 2026-10-09T03:20:59.246010+00:00. Text extraction preserves the recorded source wording; it does not determine current requirements.

Open the captured official edition

Source SHA-256
cc1420e396775af228ea36842631547db4e7e3408ce93f431be7363d74acd7cf
Text SHA-256
c61e2875f7641f5057e12cb9373a49e0bc1e8bd43cf883c416e59e3c08b0ba6f

Return to the full metadata catalog · Search complete publication text · Explore retained publication text and evidence

Coverage and limits

These are dated publication metadata, recorded clauses and literal source observations. Word, model-label, header and reference matches do not establish current legal effect, manufacturer/model identity, aircraft applicability, installed configuration or compliance.

The collection uses 33 explicit annual source snapshots. Source captures and operative-text qualifications have separate states. Missing information remains unknown.