FAA airworthiness directive publication

AD 96-24-06

1996-12-05 · Final rule publication · Federal Register document 96-30968

This page records a selected historical publication. Its current legal status, applicability to an individual aircraft and compliance have not been determined. Consult the current FAA directive and aircraft configuration and maintenance records.

Literal model wording

Source publication: 1996-12-05 · Document 96-30968. Observation edition: selected-ad-source-text-extension-2.0.0.

These are exact source labels for discovery. Manufacturer identity remains unresolved. Serial numbers, installed equipment and all other conditions have not been evaluated. The complete applicability clause below retains all conditions and notes.

560

The source says “series”; the label has not been expanded to other models.

Source opening:

    Applicability:

These observations do not determine aircraft applicability, compliance, installed configuration or current legal status.

Original legacy operative paragraph

Source publication: 1996-12-05 · Document 96-30968. Independent observation edition: selected-ad-source-text-extension-3.0.0.

This paragraph is newly retained from the same immutable official publication. It is a legacy §39.13 amendment and the publication’s own AD header, not a newly invented Affected ADs heading. The earlier observation edition remains unchanged.

    2. Section 39.13 is amended by adding the following new 
airworthiness directive:

96-24-06 Cessna Aircraft Company: Amendment 39-9844. Docket 96-NM-
267-AD.

UNKNOWN historical relationship: adding a new entry does not establish that no earlier directives are affected. No explicit historical replacement statement was established in this bounded operative paragraph.

Applicability text in this publication

    Applicability: Model 560 series airplanes having serial numbers 
560-0001 through 560-5000 inclusive; certificated in any category.

    Note 1: This AD applies to each airplane identified in the 
preceding applicability provision, regardless of whether it has been 
otherwise modified, altered, or repaired in the area subject to the 
requirements of this AD. For airplanes that have been modified, 
altered, or repaired so that the performance of the requirements of 
this AD is affected, the owner/operator must request approval for an 
alternative method of compliance in accordance with paragraph (c) of 
this AD. The request should include an assessment of the effect of 
the modification, alteration, or repair on the unsafe condition 
addressed by this AD; and, if the unsafe condition has not been 
eliminated, the request should include specific proposed actions to 
address it.

Effective-date text

An effective-date observation was not extracted from this publication.

Publication context

A relationship to prior directives has not been established from this publication.

Official sources

Read the Federal Register HTML publication · Read the official PDF publication

Sources retrieved: HTML 2026-09-08; PDF 2026-09-08.

The displayed text comes from the HTML publication. Refer to the official documents for the original wording.

This selected source edition is not a complete list of current airworthiness directives. Referenced manufacturer service documents are not reproduced here.